Hello Robert,
I am also facing with similar problem as Altaf faced. I run command "update 
kernel" on my BBB (debian), and now cannot access to BBB through usb cable. 
I tried to reinstall debian from microSD to BBB but no success. In BBB page 
it is stated that after flashing the eMMC, all 4 leds will lit solid and it 
will take approximately 45 minutes. But in my first try only three leds 
(except USER3 led)  lit solid for 1 hour. After that powered down BBB but 
the problem remained. I thought that maybe there was a problem while 
downloading image and downloaded it again. In my seacond try after 2-3 
minutes all leds lit solid (indicating that flashing is finished) but I 
waited for an hour to be sure. But no use still I cannot connect to my BBB 
through usb cable. I searched for my previous debian image which was 
installed in it before upgrading (linux 3.8.13-bone70) but could not find 
it. 

I will be so glad of your help.
Regards,
Upol

среда, 12 ноября 2014 г., 18:56:41 UTC+2 пользователь RobertCNelson написал:
>
> On Wed, Nov 12, 2014 at 10:51 AM, Altaf <altaf.s...@gmail.com 
> <javascript:>> wrote: 
> > Hello , 
> > 
> > I'm want to switch to Kernel 3.14 from 3.8, so i upgraded the kernel by 
> > issuing commands 
> > 
> > sudo apt-get update 
> > sudo apt-get install linux-image-3.14.19-ti-r27 a 
> > 
> > this updated the kernel but thereafter  i was not unable to SSH via USB 
> what 
> > i also noted is the Flash Storage didn't Mount 
> > as usually it used to in 3.8. 
> > 
> > I tried this twice with different kernel images of 3.14 releases. But no 
> > success same thing 
> > 
> > Thereafter i downloaded the image from website with 3,14 kernel, flashed 
> the 
> > eMMC  (BBB-eMMC-flasher-debian-jessie-lxqt-armhf-2014-10-22-2gb.img) 
> > Note : - Im using a 4GB Flash BBB, Rev C 
> > 
> > Now the Drive is mounted in PC but still i cant connect the BBB via SSH 
> the 
> > IP I'm using is 192.168.7.2 Port 22 
>
> correct, in the notes i noted a missing package.. anywho, uploaded a 
> new image last night, just haven't finished documenting things.. 
>
>
> https://rcn-ee.net/deb/testing/2014-11-11/lxqt/BBB-eMMC-flasher-debian-jessie-lxqt-armhf-2014-11-11-2gb.img.xz
>  
>
> Regards, 
>
> -- 
> Robert Nelson 
> http://www.rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to