On Mar 14, 2015 9:27 AM, <upol.ryskul...@gmail.com> wrote: > > Hello, > I have solved this problem. I downloaded image file from this link http://elinux.org/Beagleboard:BeagleBoneBlack_Debian and checked it by md5sum command whether it is downloaded successfully. But all images that I downloaded from that link gave me different md5 than expected checksum number.
Odd, if you still have the files' can you please respond with the file names and md5sums? So I downloaded image from armhf link http://www.armhf.com/download/ and finally cheksum matched. I followed same steps stated in Installation steps to install debian wheezy 3.14 but it also did not worked. Did I did something wrong? Or does lates image of debian have a bug? At last I was able to find linux 3.8.13-bone-70, I downloaded it from this link https://rcn-ee.net/deb/jessie-armhf/v3.8.13-bone70/install-me.sh and ran it. Finally, after reboot I got my preinstalled debian version on BBB. > > > четверг, 12 марта 2015 г., 18:45:35 UTC+2 пользователь upol.ry...@gmail.com написал: >> >> Hello Robert, >> I am also facing with similar problem as Altaf faced. I run command "update kernel" on my BBB (debian), and now cannot access to BBB through usb cable. I tried to reinstall debian from microSD to BBB but no success. In BBB page it is stated that after flashing the eMMC, all 4 leds will lit solid and it will take approximately 45 minutes. But in my first try only three leds (except USER3 led) lit solid for 1 hour. After that powered down BBB but the problem remained. I thought that maybe there was a problem while downloading image and downloaded it again. In my seacond try after 2-3 minutes all leds lit solid (indicating that flashing is finished) but I waited for an hour to be sure. But no use still I cannot connect to my BBB through usb cable. I searched for my previous debian image which was installed in it before upgrading (linux 3.8.13-bone70) but could not find it. >> >> I will be so glad of your help. >> Regards, >> Upol >> >> среда, 12 ноября 2014 г., 18:56:41 UTC+2 пользователь RobertCNelson написал: >>> >>> On Wed, Nov 12, 2014 at 10:51 AM, Altaf <altaf.s...@gmail.com> wrote: >>> > Hello , >>> > >>> > I'm want to switch to Kernel 3.14 from 3.8, so i upgraded the kernel by >>> > issuing commands >>> > >>> > sudo apt-get update >>> > sudo apt-get install linux-image-3.14.19-ti-r27 a >>> > >>> > this updated the kernel but thereafter i was not unable to SSH via USB what >>> > i also noted is the Flash Storage didn't Mount >>> > as usually it used to in 3.8. >>> > >>> > I tried this twice with different kernel images of 3.14 releases. But no >>> > success same thing >>> > >>> > Thereafter i downloaded the image from website with 3,14 kernel, flashed the >>> > eMMC (BBB-eMMC-flasher-debian-jessie-lxqt-armhf-2014-10-22-2gb.img) >>> > Note : - Im using a 4GB Flash BBB, Rev C >>> > >>> > Now the Drive is mounted in PC but still i cant connect the BBB via SSH the >>> > IP I'm using is 192.168.7.2 Port 22 >>> >>> correct, in the notes i noted a missing package.. anywho, uploaded a >>> new image last night, just haven't finished documenting things.. >>> >>> https://rcn-ee.net/deb/testing/2014-11-11/lxqt/BBB-eMMC-flasher-debian-jessie-lxqt-armhf-2014-11-11-2gb.img.xz >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
