How do I get into the logfile? I did not know about that Thanks
On Sunday, December 6, 2015 at 7:29:06 PM UTC-6, Bill Dussault wrote: > > Greetings, > > I am trying to install X11VNC and log into it via my laptop and I am > having some tough luck > > Here is what I have done.......... > > I have changed my IP address to a 192.168.1.XX > My router for some reason still thinks it is the old IP address even when > I refresh it. > > I have turned on VNC on the firewall on my 2wire router > > Next I installed VNC: > > - Debian: sudo apt-get install x11vnc > > 3. Enter the below command > > > > -Debian: > > x11vnc -bg -o %HOME/.x11vnc.log.%VNCDISPLAY -auth > /var/run/lightdm/root/:0 -forever > > > (I'm not sure if I turned it on) > > > I can ping the beaglebone from my computer > > > C:\Users\William>ping 192.168.1.XX > > > Pinging 192.168.1.XX with 32 bytes of data: > > Reply from 192.168.1.XX: bytes=32 time=3ms TTL=64 > > Reply from 192.168.1.XX: bytes=32 time=3ms TTL=64 > > Reply from 192.168.1.XX: bytes=32 time=5ms TTL=64 > > Reply from 192.168.1.XX: bytes=32 time=3ms TTL=64 > > > Ping statistics for 192.168.1.XX: > > Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), > > Approximate round trip times in milli-seconds: > > Minimum = 3ms, Maximum = 5ms, Average = 3ms > > > So I can See it. > > > I start tightVNC on my laptop > > > 192.168.1.XX:5901 > > > I get connection has been gracefully closed. Or Connection > was actively Refused... > > > X11VNC has a few configurations when opened on the desktop I am unfamiliar > with. No passwords in use as of yet (I was warned when I started) > > > Does anyone see anything out of whack? > > > Thanks! > > > Bill > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
