Hi John! Now I got a new bbb with Jessie 4.1.12-*ti*-*r29* with HW timestamping and RemoteProc/RPMSG ! Let's see how it goes. Thanks again for your answers! Valeria
Il giorno lunedì 30 novembre 2015 00:23:18 UTC+1, john3909 ha scritto: > > You might find this presentation helpful: > > > https://www.youtube.com/watch?v=pNiOlRi8jK4&index=37&list=PLGeM09tlguZTPUxEvsQiDgX0XDjfOL6oR > > Regards, > John > > > > > On Nov 27, 2015, at 2:28 AM, hllpc <valeria....@gmail.com <javascript:>> > wrote: > > Hi John, > thanks for the infos. The problem is that I need to use the PRUSS, right > now my bbb runs a 3.8.13 kernel with pru support and I've read here > <https://groups.google.com/forum/#!category-topic/beagleboard/pru/SqB8dWEUbtE> > > that the newest versions could be a bit problematic on this front. But I > won't need the TI PRU cape support so maybe just building the kernel would > be fine, I still need to do a bit of googling about this. > > Thanks again! > > Il giorno giovedì 26 novembre 2015 22:40:17 UTC+1, john3909 ha scritto: >> >> BTW, CPTS and PTP_1588_CLOCK are enabled in the ti-linux-kernel-dev repo, >> so if you use 4.1.13-ti-r34, you have everything you need. Now if you look >> in drivers’ptp you will find code for PTP. Not sure if any of this will >> work on the BBB, but it is a good place to start. >> >> Regards, >> John >> >> >> >> >> > On Nov 26, 2015, at 11:55 AM, hllpc <valeria....@gmail.com> wrote: >> > >> > Hi John, >> > strangely enough I haven't found anything specific for the bbb, I was >> thinking about using linuxptp (which allow both sw and hw timestamping). >> > The only reference I've found is hete in the forum ( >> https://groups.google.com/forum/m/#!topic/beagleboard/QHXb2hm72A8 ) and >> it seems like i have to enable the CPTS driver on the bbb, but i've no idea >> how to do it! I was hoping in any kind advice from the community! >> > >> > -- >> > For more options, visit http://beagleboard.org/discuss >> > --- >> > You received this message because you are subscribed to the Google >> Groups "BeagleBoard" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> an email to beagleboard...@googlegroups.com. >> > For more options, visit https://groups.google.com/d/optout. >> >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard...@googlegroups.com <javascript:>. > For more options, visit https://groups.google.com/d/optout. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
