Let me know about your progress as this is an interesting topic. I will help in any way I can.
Regards, John > On Dec 8, 2015, at 3:42 AM, hllpc <valeria.murgia...@gmail.com> wrote: > > Hi John! > Now I got a new bbb with Jessie 4.1.12-ti-r29 with HW timestamping and > RemoteProc/RPMSG ! Let's see how it goes. > Thanks again for your answers! > Valeria > > Il giorno lunedì 30 novembre 2015 00:23:18 UTC+1, john3909 ha scritto: > You might find this presentation helpful: > > https://www.youtube.com/watch?v=pNiOlRi8jK4&index=37&list=PLGeM09tlguZTPUxEvsQiDgX0XDjfOL6oR > > <https://www.youtube.com/watch?v=pNiOlRi8jK4&index=37&list=PLGeM09tlguZTPUxEvsQiDgX0XDjfOL6oR> > > Regards, > John > > > > >> On Nov 27, 2015, at 2:28 AM, hllpc <valeria....@ <>gmail.com >> <http://gmail.com/>> wrote: >> >> Hi John, >> thanks for the infos. The problem is that I need to use the PRUSS, right now >> my bbb runs a 3.8.13 kernel with pru support and I've read here >> <https://groups.google.com/forum/#!category-topic/beagleboard/pru/SqB8dWEUbtE> >> that the newest versions could be a bit problematic on this front. But I >> won't need the TI PRU cape support so maybe just building the kernel would >> be fine, I still need to do a bit of googling about this. >> >> Thanks again! >> >> Il giorno giovedì 26 novembre 2015 22:40:17 UTC+1, john3909 ha scritto: >> BTW, CPTS and PTP_1588_CLOCK are enabled in the ti-linux-kernel-dev repo, so >> if you use 4.1.13-ti-r34, you have everything you need. Now if you look in >> drivers’ptp you will find code for PTP. Not sure if any of this will work on >> the BBB, but it is a good place to start. >> >> Regards, >> John >> >> >> >> >> > On Nov 26, 2015, at 11:55 AM, hllpc <valeria....@gmail.com <>> wrote: >> > >> > Hi John, >> > strangely enough I haven't found anything specific for the bbb, I was >> > thinking about using linuxptp (which allow both sw and hw timestamping). >> > The only reference I've found is hete in the forum ( >> > https://groups.google.com/forum/m/#!topic/beagleboard/QHXb2hm72A8 >> > <https://groups.google.com/forum/m/#!topic/beagleboard/QHXb2hm72A8> ) and >> > it seems like i have to enable the CPTS driver on the bbb, but i've no >> > idea how to do it! I was hoping in any kind advice from the community! >> > >> > -- >> > For more options, visit http://beagleboard.org/discuss >> > <http://beagleboard.org/discuss> >> > --- >> > You received this message because you are subscribed to the Google Groups >> > "BeagleBoard" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> > email to beagleboard...@ <>googlegroups. <http://googlegroups.com/>com >> > <http://googlegroups.com/>. >> > For more options, visit https://groups.google.com/d/optout >> > <https://groups.google.com/d/optout>. >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> <http://beagleboard.org/discuss> >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com > <mailto:beagleboard+unsubscr...@googlegroups.com>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.