You probably need to switch to the 4.4.x branch.

> On Apr 20, 2016, at 16:55 , evilwulfie <evilwul...@gmail.com> wrote:
> 
> So much i dont know.
> 
> 
> rick or robert where might i get this file ?
> 
> am33xx-es2.dtsi
> 
> Its not in the dts-rebuilder i installed and Ricks new dts file seems to
> require it to compile
> 
> src/arm/am335x-boneblack-audio-emmc.dts:11:27: fatal error:
> am33xx-es2.dtsi: No such file or directory
> 
> Designing hardware is so much more easier :P
> 
> I remember firmware in the old days  patch the code and burn some
> bipolar proms  install and continue
> 
> 
> On 4/20/2016 2:31 PM, Rick Mann wrote:
>> Keep in mind I'm on 4.4.7-bone-rt-r9, not 4.1.x. Dunno if that matters.
>> 
>>> On Apr 20, 2016, at 14:25 , William Hermans <yyrk...@gmail.com> wrote:
>>> 
>>> Just playing along here . . . I thought maybe HDMI had to be loaded to load 
>>> the audio cape, but seems not. I'm going to start over with a fresh dts 
>>> file and load the same one as evilwulfie to see if I can get to the bottom 
>>> of things.
>>> 
>>> william@beaglebone:~$ sudo sh -c "echo 'BB-BONE-AUDI-02' > 
>>> /sys/devices/platform/bone_capemgr/slots"
>>> william@beaglebone:~$ cat /sys/devices/platform/bone_capemgr/slots
>>> 0: PF----  -1
>>> 1: PF----  -1
>>> 2: PF----  -1
>>> 3: PF----  -1
>>> 5: P-O-L-   0 Override Board Name,00A0,Override Manuf,WH-UART5
>>> william@beaglebone:~$ dmesg | grep BB-BONE-AUDI-02
>>> [66985.108405] bone_capemgr bone_capemgr: part_number 'BB-BONE-AUDI-02', 
>>> version 'N/A'
>>> [66985.128912] bone_capemgr bone_capemgr: slot #6: 'Override Board 
>>> Name,00A0,Override Manuf,BB-BONE-AUDI-02'
>>> 
>>> 
>>> On Wed, Apr 20, 2016 at 2:15 PM, evilwulfie <evilwul...@gmail.com> wrote:
>>> very interesting. after removing the eDMA fix and recompiling we still cant 
>>> load the audio cape
>>> 
>>> sudo cat /sys/kernel/debug/pinctrl/44e10800.pinmux/pinmux-pins
>>> 
>>> stuff removed for clarity
>>> 
>>> 
>>> pin 82 (44e10948.0): 4a101000.mdio (GPIO UNCLAIMED) function 
>>> davinci_mdio_default group davinci_mdio_default
>>> pin 83 (44e1094c.0): 4a101000.mdio (GPIO UNCLAIMED) function 
>>> davinci_mdio_default group davinci_mdio_default
>>> 
>>> 
>>> I think this is the reason.
>>> 
>>> 
>>> 
>>> 
>>> On 4/20/2016 1:55 PM, Robert Nelson wrote:
>>>> 
>>>> On Wed, Apr 20, 2016 at 3:45 PM, evilwulfie <evilwul...@gmail.com> wrote:
>>>> I see that on 4.1.14-bone-rt-r17 kernel the edma fix is compiled into
>>>> the am335x-boneblack-emmc-overlay.dtb resulting in
>>>> any audio cape overlay not loading.
>>>> 
>>>> so i guess i can grab this file
>>>> https://github.com/beagleboard/linux/blob/4.1/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts
>>>> 
>>>> but i have no idea how to complie it and what paths i need to include to
>>>> get it to complie
>>>> 
>>>> it's easy, there is a whole repo setup to just do that..
>>>> 
>>>> git clone -b 4.1.x https://github.com/RobertCNelson/dtb-rebuilder
>>>> cd ./dtb-rebuilder/
>>>> 
>>>> make/sudo make install/etc...
>>>> 
>>>> I am wondering why that *fix* was needed and why it wants to enable the
>>>> davinci_mdio_default pins so we cant enable audio overlays
>>>> 
>>>> oh it's been discussed on this list before, there was a specific case it 
>>>> needed to be enabled by default to fix a case..
>>>> 
>>>> and the "fix" was pushed to the repo, before we got the that audio cape.
>>>> 
>>>> Regards,
>>>> 
>>>> -- 
>>>> Robert Nelson
>>>> https://rcn-ee.com/
>>>> -- 
>>>> For more options, visit http://beagleboard.org/discuss
>>>> --- 
>>>> You received this message because you are subscribed to the Google Groups 
>>>> "BeagleBoard" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>>> email to beagleboard+unsubscr...@googlegroups.com.
>>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/beagleboard/CAOCHtYhoexceTQ%2B69QvjqTazHkwdy%2BmtUpYYBQctFqsPGgNjew%40mail.gmail.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>> 
>>>     Virus-free. www.avast.com
>>> 
>>> -- 
>>> For more options, visit http://beagleboard.org/discuss
>>> --- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to beagleboard+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/beagleboard/5717F175.6030608%40gmail.com.
>>> 
>>> For more options, visit https://groups.google.com/d/optout.
>>> 
>>> 
>>> -- 
>>> For more options, visit http://beagleboard.org/discuss
>>> --- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to beagleboard+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/beagleboard/CALHSORrHtB5cqwU68QjK7JNkMaYWr1%3Dh9K7f1dkLFJ6Ltti4OQ%40mail.gmail.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> -- 
> For more options, visit http://beagleboard.org/discuss
> --- 
> You received this message because you are subscribed to the Google Groups 
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/beagleboard/571816F6.9050201%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.


-- 
Rick Mann
rm...@latencyzero.com


-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/69CB4EB2-08F0-454E-BBC6-5D51C4467098%40latencyzero.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to