Hi, I am trying to create a 802.11 Mesh Network using BBG-W. It seems to me that it should be possible as TI has advertised that their WiLink 8 modules are capable of this type of network.
I first tried to use "sudo iw phy phy0 interface add mesh0 type mp mesh_id mymesh", but it returns "Operation not supported (-95)". Then, I noticed that "iw list" says only: " Supported interface modes: * managed * AP * AP/VLAN * monitor * P2P-client * P2P-GO * P2P-device" So no mesh... I am using "BBGW-blank-debian-8.5-seeed-iot-armhf-2016-07-10-4gb.img.xz <https://rcn-ee.net/rootfs/bb.org/testing/2016-07-10/seeed-iot/BBGW-blank-debian-8.5-seeed-iot-armhf-2016-07-10-4gb.img.xz>" image. I hope this is a driver related problem, is that it? If so, how should I proceed? Follow http://processors.wiki.ti.com/index.php/WiLink8_Linux_Getting_Started_Guide to create a compatible image? Best, Pedro -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/97cd0755-b505-4da4-bdd5-a193849324a6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
