I just checked and the JST-SH connector pins, inside the terminal are only 1mm apart. https://is.alicdn.com/img/pb/863/022/524/524022863_862.jpg
I guess I will wait for the wire assemblies. On Friday, 19 May 2017 00:06:02 UTC+2, William Hermans wrote: > > > > On Thu, May 18, 2017 at 2:06 PM, Niels Jakob Buch <njb...@gmail.com > <javascript:>> wrote: > >> Argh, waiting on a pile of JST-XX connectors to get the Blue-world up and >> running. But thanks! >> > > So, I actually have no idea of the pin pitch on those JST headers. But the > serial debug cable I bought years ago, and still use. Has fairly thin slip > on connectors. You only need RXD, TXD, and ground connected. The cable I > bought was a Prolific PL2303HX cable very similar to the one stocked at > Adafruit https://www.adafruit.com/product/954 > > I actually bought mine off ebay for less than $3, but shipping took a lot > longer too. Adafruit is stating on their page there that they're now using > SilLabs something or another because of driver stability. But I've never > experienced a problem with the PL2303HX cable. > > Anyway, my point is that you may not need a JST connector for this purpose. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/380ba717-d51d-435d-8448-7949887a1331%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.