> On Oct 29, 2018, at 9:15 PM, devonadai...@gmail.com wrote: > The board is being powered off the micro USB port from my computer at the > moment. > > The voltage from VI is 5 Volts and VB is 0 Volts. ID is about .8 Volts. I do > have 5 Volts on the USB. > > I would be interested in seeing those KiCad projects if possible!
PocketScroller: https://www.dropbox.com/sh/6xks5tl5l4vr8cm/AAD10ftxImjgVQZbDLvcBRhMa?dl=0 <https://www.dropbox.com/sh/6xks5tl5l4vr8cm/AAD10ftxImjgVQZbDLvcBRhMa?dl=0> F8-PB: https://www.dropbox.com/sh/evuux5o7ogv2j50/AABsyxNA2QenPpanllb5lZ5Ha?dl=0 <https://www.dropbox.com/sh/evuux5o7ogv2j50/AABsyxNA2QenPpanllb5lZ5Ha?dl=0> Just recently updated them to KiCad 5 so hopefully they work. Not sure I got all the components re-mapped. Couple more questions: What WIFI adapter? By default, FPP blacklists the kernel drivers as they, in general, suck for our use. I have a bunch of the various Realtek blob drivers installed, but by no means all of them. On the network page, you could try flipping to using the Kernel drivers and see if that helps. BTW: can I ask what you are trying to do? What kind of thing are you trying to design? Dan > > Falcon doesn't seem to be seeing the adapter. > > Thanks, > > Devon > > On Monday, October 29, 2018 at 2:26:13 PM UTC-4, devona...@gmail.com wrote: > Hello Everyone! > > I am currently working on a project with Falcon Christmas on the Pocket > Beagle. I have a USB WIFI dongle to add WIFI to the pocket beagle. > > I was following this guide to add the USB type A to it: > https://www.teachmemicro.com/pocketbeagle-wifi/ > <https://www.teachmemicro.com/pocketbeagle-wifi/>. > > I am sure that it is wired properly but it doesn't show up on Falcon as a > device when i do "ifconfig". > The USB however doesn't seem to be on because the LED on the dongle isn't > lighting up even though there is 5 volts to the USB. > > I have made sure that the USB pins are not being used by Falcon through the > web interface. > > The last thing i have tried was going through "connmanctl" but I get this > error when i try to enable WIFI. > "Error wifi: Method "SetProperty" with signature "sv" on interface > "net.connman.Technology" doesn't exist" > > Are there any suggestions as to what to try or where to debug this issue? > > Thanks for your help! > > > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to a topic in the Google > Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/U9AFVUM5G4U/unsubscribe > <https://groups.google.com/d/topic/beagleboard/U9AFVUM5G4U/unsubscribe>. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com > <mailto:beagleboard+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/96dd2698-fb12-486b-9e52-76cb4abe76d6%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/96dd2698-fb12-486b-9e52-76cb4abe76d6%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- Daniel Kulp d...@kulp.com <mailto:d...@kulp.com> - http://dankulp.com/blog <http://dankulp.com/blog> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4D7CB156-AD22-4E6B-B4CF-A2964BDC62A9%40kulp.com. For more options, visit https://groups.google.com/d/optout.
