Here's the rest. This is all before the 'apt upgrade'.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.105-ti-r114 (root@a5-imx6q-wandboard-2gb)
(gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Fri
Aug 17 11:05:53 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] percpu: Embedded 15 pages/cpu @df902000 s31820 r8192 d21428
u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129412
[ 0.000000] Kernel command line: console=ttyO0,115200n8
bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4
rootwait coherent_pool=1M net.ifnames=0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 440220K/522240K available (12288K kernel code, 1139K
rwdata, 4324K rodata, 1024K init, 459K bss, 32868K reserved, 49152K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0d00000 (13280 kB)
[ 0.000000] .init : 0xc1300000 - 0xc1400000 (1024 kB)
[ 0.000000] .data : 0xc1400000 - 0xc151cd58 (1140 kB)
[ 0.000000] .bss : 0xc151e000 - 0xc1590ff0 ( 460 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000051] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000066] OMAP clocksource: timer1 at 24000000 Hz
[ 0.002095] clocksource_probe: no matching clocksources found
[ 0.002417] Console: colour dummy device 80x30
[ 0.002452] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.002461] This ensures that you still see kernel messages. Please
[ 0.002469] update your kernel commandline.
[ 0.002496] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.020746] pid_max: default: 32768 minimum: 301
[ 0.021016] Security Framework initialized
[ 0.021034] Yama: becoming mindful.
[ 0.021093] AppArmor: AppArmor initialized
[ 0.021181] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.021194] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.022359] CPU: Testing write buffer coherency: ok
[ 0.022433] ftrace: allocating 39262 entries in 116 pages
[ 0.133533] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.133613] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.167804] EFI services will not be available.
[ 0.180740] Brought up 1 CPUs
[ 0.180760] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.180770] CPU: All CPU(s) started in SVC mode.
[ 0.182399] devtmpfs: initialized
[ 0.221055] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 0.221635] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.221668] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.225444] xor: measuring software checksum speed
[ 0.264759] arm4regs : 1217.000 MB/sec
[ 0.304710] 8regs : 1091.000 MB/sec
[ 0.344709] 32regs : 1088.000 MB/sec
[ 0.384709] neon : 1665.000 MB/sec
[ 0.384720] xor: using function: neon (1665.000 MB/sec)
[ 0.384742] pinctrl core: initialized pinctrl subsystem
[ 0.386235] NET: Registered protocol family 16
[ 0.390094] DMA: preallocated 1024 KiB pool for atomic coherent
allocations
[ 0.459089] omap_hwmod: debugss: _wait_target_disable failed
[ 0.508757] cpuidle: using governor ladder
[ 0.520738] cpuidle: using governor menu
[ 0.537011] OMAP GPIO hardware version 0.1
[ 0.563807] No ATAGs?
[ 0.563839] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.564659] omap4_sram_init:Unable to allocate sram needed to handle
errata I688
[ 0.564679] omap4_sram_init:Unable to get sram pool needed to handle
errata I688
[ 0.676779] raid6: neonx2 gen() 1882 MB/s
[ 0.744731] raid6: neonx2 xor() 1157 MB/s
[ 0.744743] raid6: using algorithm neonx2 gen() 1882 MB/s
[ 0.744753] raid6: .... xor() 1157 MB/s, rmw enabled
[ 0.744762] raid6: using intx1 recovery algorithm
[ 0.755709] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.761939] SCSI subsystem initialized
[ 0.762379] usbcore: registered new interface driver usbfs
[ 0.762459] usbcore: registered new interface driver hub
[ 0.762650] usbcore: registered new device driver usb
[ 0.763783] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring
probe
[ 0.764863] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.766334] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 0.766627] media: Linux media interface: v0.10
[ 0.766700] Linux video capture interface: v2.00
[ 0.766793] pps_core: LinuxPPS API ver. 1 registered
[ 0.766803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.766830] PTP clock support registered
[ 0.767975] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 0.769124] Advanced Linux Sound Architecture Driver Initialized.
[ 0.769955] NetLabel: Initializing
[ 0.769971] NetLabel: domain hash size = 128
[ 0.769979] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.770055] NetLabel: unlabeled traffic allowed by default
[ 0.773170] clocksource: Switched to clocksource timer1
[ 0.888492] VFS: Disk quotas dquot_6.6.0
[ 0.888624] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.889038] AppArmor: AppArmor Filesystem Enabled
[ 0.904705] NET: Registered protocol family 2
[ 0.905784] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.905838] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.905899] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.905981] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.906005] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.906360] NET: Registered protocol family 1
[ 0.915266] RPC: Registered named UNIX socket transport module.
[ 0.915288] RPC: Registered udp transport module.
[ 0.915296] RPC: Registered tcp transport module.
[ 0.915303] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.916237] Unpacking initramfs...
[ 1.089234] random: fast init done
[ 1.303638] Freeing initrd memory: 5668K
[ 1.304265] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 1.308209] audit: initializing netlink subsys (disabled)
[ 1.308326] audit: type=2000 audit(1.236:1): initialized
[ 1.313943] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 1.324301] zbud: loaded
[ 1.332751] NFS: Registering the id_resolver key type
[ 1.332803] Key type id_resolver registered
[ 1.332813] Key type id_legacy registered
[ 1.332833] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.333306] fuse init (API version 7.26)
[ 1.334497] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 1.334794] orangefs_init: module version upstream loaded
[ 1.334807] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 1.349314] Key type asymmetric registered
[ 1.349340] Asymmetric key parser 'x509' registered
[ 1.349489] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 245)
[ 1.353830] io scheduler noop registered
[ 1.353847] io scheduler deadline registered
[ 1.354175] io scheduler cfq registered (default)
[ 1.356922] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
[ 1.364105] gpio-of-helper ocp:cape-universal: ready
[ 1.376588] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 1.379032] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.382803] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[ 2.221212] console [ttyS0] enabled
[ 2.225818] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,
base_baud = 3000000) is a 8250
[ 2.235709] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160,
base_baud = 3000000) is a 8250
[ 2.245660] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 161,
base_baud = 3000000) is a 8250
[ 2.258091] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 2.265307] [drm] Initialized
[ 2.272322] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.279674] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.286884] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.294058] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.323486] eqep 48300180.eqep: ver. 1.0
[ 2.327757] eqep 48300180.eqep: count_mode:0
[ 2.332105] eqep 48300180.eqep: invert_qa:1
[ 2.336336] eqep 48300180.eqep: invert_qb:1
[ 2.340563] eqep 48300180.eqep: invert_qi:0
[ 2.344788] eqep 48300180.eqep: invert_qs:0
[ 2.349014] eqep 48300180.eqep: swap_inputs:0
[ 2.353416] eqep 48300180.eqep: QDECCTL:0x0180
[ 2.357902] eqep 48300180.eqep: QPOSINIT:0x00000000
[ 2.362823] eqep 48300180.eqep: QPOSMAX:0xffffffff
[ 2.367658] eqep 48300180.eqep: QPOSCNT:0x00000000
[ 2.372495] eqep 48300180.eqep: omit_interrupt:0
[ 2.377169] eqep 48300180.eqep: QEINT:0x0800
[ 2.381479] eqep 48300180.eqep: QUPRD:0x05f5e100
[ 2.386138] eqep 48300180.eqep: QEPCTL:0x009e write
[ 2.391059] eqep 48300180.eqep: QEPCTL:0x009e read
[ 2.395915] eqep 48300180.eqep: irq:193, clk_rate:100000000
[ 2.401856] eqep 48302180.eqep: ver. 1.0
[ 2.406016] eqep 48302180.eqep: count_mode:0
[ 2.410350] eqep 48302180.eqep: invert_qa:1
[ 2.414579] eqep 48302180.eqep: invert_qb:1
[ 2.418805] eqep 48302180.eqep: invert_qi:0
[ 2.423032] eqep 48302180.eqep: invert_qs:0
[ 2.427257] eqep 48302180.eqep: swap_inputs:0
[ 2.431656] eqep 48302180.eqep: QDECCTL:0x0180
[ 2.436142] eqep 48302180.eqep: QPOSINIT:0x00000000
[ 2.441063] eqep 48302180.eqep: QPOSMAX:0xffffffff
[ 2.445900] eqep 48302180.eqep: QPOSCNT:0x00000000
[ 2.450735] eqep 48302180.eqep: omit_interrupt:0
[ 2.455405] eqep 48302180.eqep: QEINT:0x0800
[ 2.459717] eqep 48302180.eqep: QUPRD:0x05f5e100
[ 2.464377] eqep 48302180.eqep: QEPCTL:0x009e write
[ 2.469299] eqep 48302180.eqep: QEPCTL:0x009e read
[ 2.474149] eqep 48302180.eqep: irq:194, clk_rate:100000000
[ 2.479999] eqep 48304180.eqep: ver. 1.0
[ 2.484128] eqep 48304180.eqep: count_mode:0
[ 2.488462] eqep 48304180.eqep: invert_qa:1
[ 2.492692] eqep 48304180.eqep: invert_qb:1
[ 2.496919] eqep 48304180.eqep: invert_qi:0
[ 2.501165] eqep 48304180.eqep: invert_qs:0
[ 2.505390] eqep 48304180.eqep: swap_inputs:0
[ 2.509789] eqep 48304180.eqep: QDECCTL:0x0180
[ 2.514275] eqep 48304180.eqep: QPOSINIT:0x00000000
[ 2.519196] eqep 48304180.eqep: QPOSMAX:0xffffffff
[ 2.524030] eqep 48304180.eqep: QPOSCNT:0x00000000
[ 2.528867] eqep 48304180.eqep: omit_interrupt:0
[ 2.533530] eqep 48304180.eqep: QEINT:0x0800
[ 2.537841] eqep 48304180.eqep: QUPRD:0x05f5e100
[ 2.542500] eqep 48304180.eqep: QEPCTL:0x009e write
[ 2.547421] eqep 48304180.eqep: QEPCTL:0x009e read
[ 2.552270] eqep 48304180.eqep: irq:196, clk_rate:100000000
[ 2.566331] libphy: Fixed MDIO Bus: probed
[ 2.571671] CAN device driver interface
[ 2.577382] c_can_platform 481cc000.can: c_can_platform device
registered (regs=fa1cc000, irq=168)
[ 2.587570] c_can_platform 481d0000.can: c_can_platform device
registered (regs=fa1d0000, irq=169)
[ 2.653259] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 2.659438] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 2.666595] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 2.687858] libphy: 4a101000.mdio: probed
[ 2.692228] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00,
driver SMSC LAN8710/LAN8720
[ 2.702629] cpsw 4a100000.ethernet: Detected MACID = 94:e3:6d:ce:1d:e3
[ 2.709518] cpsw 4a100000.ethernet: cpts: overflow check period 1250
(jiffies)
[ 2.721071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.727809] ehci-pci: EHCI PCI platform driver
[ 2.732420] ehci-platform: EHCI generic platform driver
[ 2.738194] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.744638] usbcore: registered new interface driver usb-storage
[ 2.754082] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 2.767417] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 2.778688] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 2.784137] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus
number 1
[ 2.791898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.798763] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.806046] usb usb1: Product: MUSB HDRC host driver
[ 2.811056] usb usb1: Manufacturer: Linux 4.9.105-ti-r114 musb-hcd
[ 2.817287] usb usb1: SerialNumber: musb-hdrc.1
[ 2.823013] hub 1-0:1.0: USB hub found
[ 2.827000] hub 1-0:1.0: 1 port detected
[ 2.844999] omap_rtc 44e3e000.rtc: already running
[ 2.850495] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as
rtc0
[ 2.859598] i2c /dev entries driver
[ 2.866480] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
sec
[ 2.875305] cpuidle: enable-method property 'ti,am3352' found operations
[ 2.884159] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 2.971686] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.982014] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 2.988187] omap-aes 53500000.aes: will run requests pump with realtime
priority
[ 2.998580] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.010831] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.017492] usbcore: registered new interface driver usbhid
[ 3.023212] usbhid: USB HID core driver
[ 3.027823] remoteproc remoteproc0: wkup_m3 is available
[ 3.043683] wireguard: WireGuard 0.0.20180809 loaded. See
www.wireguard.com for information.
[ 3.052580] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld
<ja...@zx2c4.com>. All Rights Reserved.
[ 3.063743] NET: Registered protocol family 10
[ 3.069233] mmc1: new high speed MMC card at address 0001
[ 3.079666] mip6: Mobile IPv6
[ 3.083313] NET: Registered protocol family 17
[ 3.087915] mmcblk1: mmc1:0001 M62704 3.56 GiB
[ 3.093104] can: controller area network core (rev 20120528 abi 9)
[ 3.099424] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[ 3.106042] NET: Registered protocol family 29
[ 3.110612] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[ 3.118038] mmcblk1: p1
[ 3.123825] Key type dns_resolver registered
[ 3.128217] mpls_gso: MPLS GSO support
[ 3.132330] omap_voltage_late_init: Voltage driver support not added
[ 3.139435] PM: Cannot get wkup_m3_ipc handle
[ 3.144089] ThumbEE CPU extension supported.
[ 3.148447] Registering SWP/SWPB emulation handler
[ 3.154366] registered taskstats version 1
[ 3.158680] zswap: loaded using pool lzo/zbud
[ 3.170064] Btrfs loaded, crc32c=crc32c-generic
[ 3.208858] Key type encrypted registered
[ 3.213370] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.237305] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.376073] tda998x 0-0070: found TDA19988
[ 3.381389] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[ 3.388891] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ 3.388908] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.388911] [drm] No driver support for vblank timestamp query.
[ 3.395428] tilcdc 4830e000.lcdc: No connectors reported connected with
modes
[ 3.395446] [drm] Cannot find any crtc or sizes - going 1024x768
[ 3.429212] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.430391] hub 1-1:1.0: USB hub found
[ 3.430486] hub 1-1:1.0: 4 ports detected
[ 3.432382] Console: switching to colour frame buffer device 128x48
[ 3.459744] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 3.492328] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[ 3.503745] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.509653] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.516711] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.523876] remoteproc remoteproc0: powering up wkup_m3
[ 3.532431] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp
mapping ok
[ 3.541453] PM: Cannot get wkup_m3_ipc handle
[ 3.542738] omap_rtc 44e3e000.rtc: setting system clock to 2020-10-23
23:18:19 UTC (1603495099)
[ 3.542748] of_cfs_init
[ 3.542895] of_cfs_init: OK
[ 3.543989] ALSA device list:
[ 3.543997] #0: TI BeagleBone Black
[ 3.572027] Freeing unused kernel memory: 1024K
[ 3.576752] remoteproc remoteproc0: Booting fw image
am335x-pm-firmware.elf, size 217168
[ 3.577024] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 3.577047] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version =
0x193
Loading, please wait...
starting version 232
[ 3.682086] random: systemd-udevd: uninitialized urandom read (16 bytes
read)
[ 3.702389] random: systemd-udevd: uninitialized urandom read (16 bytes
read)
[ 3.710652] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.725292] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc
[ 3.827661] usb 1-1.1: New USB device found, idVendor=046d,
idProduct=c534
[ 3.841354] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.857365] usb 1-1.1: Product: USB Receiver
[ 3.865345] usb 1-1.1: Manufacturer: Logitech
[ 3.900483] input: Logitech USB Receiver as
/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1
[ 3.997520] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID
v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input0
[ 4.028330] PM: bootloader does not support rtc-only!
[ 4.045429] input: Logitech USB Receiver as
/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2
[ 4.108332] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB
HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
rootfs: clean, 49947/233392 files, 414922/932864 blocks
done.
[ 7.267585] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data
mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 7.693432] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.733943] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.752939] systemd[1]: Detected architecture arm.
Welcome to Debian GNU/Linux 9 (stretch)!
[ 7.778780] systemd[1]: Set hostname to <G5-HMI>.
[ 8.343491] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 8.370389] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 8.394494] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 8.410526] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 8.426642] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 8.442243] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 8.459277] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Set up automount Arbitrary Executab…rmats File System Automount
Point.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target Swap.
[ OK ] Created slice System Slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Slices.
Starting Create list of required st…ce nodes for the current
kernel...
Mounting RPC Pipe File System...
Mounting /sys/kernel/debug...
Mounting POSIX Message Queue File System...
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on fsck to fsckd communication Socket.
Starting Remount Root and Kernel File Systems...
[ OK ] Listening on Syslog Socket.
Starting Journal Service...
Starting Load Kernel Modules...
[ 8.950444] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[ OK ] Mounted RPC Pipe File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted /sys/kernel/debug.
[ OK ] Started Create list of required sta…vice nodes for the current
kernel.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Load Kernel Modules.
Mounting Configuration File System...
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
Starting Load/Save Random Seed...
Starting udev Coldplug all Devices...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Configuration File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
Starting Preprocess NFS configuration...
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Preprocess NFS configuration.
[ OK ] Reached target NFS client services.
[ OK ] Started udev Kernel Device Manager.
[ 10.239654] systemd-journald[377]: Received request to flush runtime
journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting RPC bind portmap service...
Starting Network Time Synchronization...
[ OK ] Started RPC bind portmap service.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ 11.749748] net eth0: initializing cpsw version 1.12 (0)
[ 11.760783] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 11.783249] cpsw 4a100000.ethernet: ALE Table size 1024
[ 11.874030] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver
[SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
[ 11.927941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting VS5 bootsplash...
Starting Generic Board Startup...
Starting BB WL18xx wlan0 Service...
Starting System Logging Service...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Vision Series 5 Human Machine Interface.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
Starting Login Service...
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Started System Logging Service.
[ OK ] Started VS5 bootsplash.
[ OK ] Started BB WL18xx wlan0 Service.
[ OK ] Started Login Service.
[ 13.958047] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full -
flow control rx/tx
[ 13.983815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.172766] using random self ethernet address
[ 15.181401] using random host ethernet address
[ 15.241434] using random self ethernet address
[ 15.249548] using random host ethernet address
[ OK ] Found device /dev/ttyS0.
[ 15.443293] usb0: HOST MAC 94:e3:6d:ce:1d:e4
[ 15.453631] usb0: MAC 94:e3:6d:ce:1d:e5
[ 15.464216] usb1: HOST MAC 94:e3:6d:ce:1d:e7
[ 15.477534] usb1: MAC 94:e3:6d:ce:1d:e8
[ 15.834803] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 16.053104] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
[ 16.492728] random: crng init done
[ 16.496182] random: 7 urandom warning(s) missed due to ratelimiting
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Starting dnsmasq - A lightweight DHCP and caching DNS server...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ 21.198215] pvrsrvkm: loading out-of-tree module taints kernel.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server.
[ OK ] Reached target Host and Network Name Lookups.
[ 21.990046] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1
[ OK ] Reached target Sound Card.
[ OK ] Found device /dev/ttyGS0.
[ OK ] Started Serial Getty on ttyGS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started Generic Board Startup.
Starting BB WL18xx Bluetooth Service...
[ OK ] Started BB WL18xx Bluetooth Service.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Debian GNU/Linux 9 G5-HMI ttyS0
BeagleBoard.org Debian Image 2018-01-21
G5-HMI login:
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/6f6e84c8-0620-4a74-8f7f-ba28fdbd6e0bo%40googlegroups.com.
