OK, I did the hold on the bb-cape-overlays. Running the 'sudo apt upgrade' now. I'll let you know how it goes shortly.
It it fails to boot again to you want the full serial port log? Hartley On Friday, October 23, 2020 at 5:08:43 PM UTC-7, RobertCNelson wrote: > > I bet it's bb-cape-overlays, just lock it: > > sudo apt-mark hold bb-cape-overlays > > Regards, > > On Fri, Oct 23, 2020 at 6:50 PM Hartley Sweeten <biggu...@gmail.com > <javascript:>> wrote: > > > > Here's the rest. This is all before the 'apt upgrade'. > > > > Starting kernel ... > > > > [ 0.000000] Booting Linux on physical CPU 0x0 > > [ 0.000000] Linux version 4.9.105-ti-r114 > (root@a5-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian > 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Fri Aug 17 11:05:53 UTC 2018 > > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), > cr=10c5387d > > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > > [ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black > > [ 0.000000] efi: Getting EFI parameters from FDT: > > [ 0.000000] efi: UEFI not found. > > [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 > > [ 0.000000] Memory policy: Data cache writeback > > [ 0.000000] CPU: All CPU(s) started in SVC mode. > > [ 0.000000] AM335X ES2.1 (sgx neon) > > [ 0.000000] percpu: Embedded 15 pages/cpu @df902000 s31820 r8192 > d21428 u61440 > > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 129412 > > [ 0.000000] Kernel command line: console=ttyO0,115200n8 > bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 > > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > > [ 0.000000] Memory: 440220K/522240K available (12288K kernel code, > 1139K rwdata, 4324K rodata, 1024K init, 459K bss, 32868K reserved, 49152K > cma-reserved, 0K highmem) > > [ 0.000000] Virtual kernel memory layout: > > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > > [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) > > [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) > > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > > [ 0.000000] .text : 0xc0008000 - 0xc0d00000 (13280 kB) > > [ 0.000000] .init : 0xc1300000 - 0xc1400000 (1024 kB) > > [ 0.000000] .data : 0xc1400000 - 0xc151cd58 (1140 kB) > > [ 0.000000] .bss : 0xc151e000 - 0xc1590ff0 ( 460 kB) > > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, > Nodes=1 > > [ 0.000000] Preemptible hierarchical RCU implementation. > > [ 0.000000] Build-time adjustment of leaf fanout to 32. > > [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. > > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, > nr_cpu_ids=1 > > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 > interrupts > > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz > > [ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps > every 89478484971ns > > [ 0.000051] clocksource: timer1: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 79635851949 ns > > [ 0.000066] OMAP clocksource: timer1 at 24000000 Hz > > [ 0.002095] clocksource_probe: no matching clocksources found > > [ 0.002417] Console: colour dummy device 80x30 > > [ 0.002452] WARNING: Your 'console=ttyO0' has been replaced by > 'ttyS0' > > [ 0.002461] This ensures that you still see kernel messages. Please > > [ 0.002469] update your kernel commandline. > > [ 0.002496] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) > > [ 0.020746] pid_max: default: 32768 minimum: 301 > > [ 0.021016] Security Framework initialized > > [ 0.021034] Yama: becoming mindful. > > [ 0.021093] AppArmor: AppArmor initialized > > [ 0.021181] Mount-cache hash table entries: 1024 (order: 0, 4096 > bytes) > > [ 0.021194] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > > [ 0.022359] CPU: Testing write buffer coherency: ok > > [ 0.022433] ftrace: allocating 39262 entries in 116 pages > > [ 0.133533] CPU0: thread -1, cpu 0, socket -1, mpidr 0 > > [ 0.133613] Setting up static identity map for 0x80100000 - > 0x80100060 > > [ 0.167804] EFI services will not be available. > > [ 0.180740] Brought up 1 CPUs > > [ 0.180760] SMP: Total of 1 processors activated (995.32 BogoMIPS). > > [ 0.180770] CPU: All CPU(s) started in SVC mode. > > [ 0.182399] devtmpfs: initialized > > [ 0.221055] VFP support v0.3: implementor 41 architecture 3 part 30 > variant c rev 3 > > [ 0.221635] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > > [ 0.221668] futex hash table entries: 256 (order: 2, 16384 bytes) > > [ 0.225444] xor: measuring software checksum speed > > [ 0.264759] arm4regs : 1217.000 MB/sec > > [ 0.304710] 8regs : 1091.000 MB/sec > > [ 0.344709] 32regs : 1088.000 MB/sec > > [ 0.384709] neon : 1665.000 MB/sec > > [ 0.384720] xor: using function: neon (1665.000 MB/sec) > > [ 0.384742] pinctrl core: initialized pinctrl subsystem > > [ 0.386235] NET: Registered protocol family 16 > > [ 0.390094] DMA: preallocated 1024 KiB pool for atomic coherent > allocations > > [ 0.459089] omap_hwmod: debugss: _wait_target_disable failed > > [ 0.508757] cpuidle: using governor ladder > > [ 0.520738] cpuidle: using governor menu > > [ 0.537011] OMAP GPIO hardware version 0.1 > > [ 0.563807] No ATAGs? > > [ 0.563839] hw-breakpoint: debug architecture 0x4 unsupported. > > [ 0.564659] omap4_sram_init:Unable to allocate sram needed to handle > errata I688 > > [ 0.564679] omap4_sram_init:Unable to get sram pool needed to handle > errata I688 > > [ 0.676779] raid6: neonx2 gen() 1882 MB/s > > [ 0.744731] raid6: neonx2 xor() 1157 MB/s > > [ 0.744743] raid6: using algorithm neonx2 gen() 1882 MB/s > > [ 0.744753] raid6: .... xor() 1157 MB/s, rmw enabled > > [ 0.744762] raid6: using intx1 recovery algorithm > > [ 0.755709] edma 49000000.edma: TI EDMA DMA engine driver > > [ 0.761939] SCSI subsystem initialized > > [ 0.762379] usbcore: registered new interface driver usbfs > > [ 0.762459] usbcore: registered new interface driver hub > > [ 0.762650] usbcore: registered new device driver usb > > [ 0.763783] omap_i2c 44e0b000.i2c: could not find pctldev for node > /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring > probe > > [ 0.764863] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz > > [ 0.766334] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz > > [ 0.766627] media: Linux media interface: v0.10 > > [ 0.766700] Linux video capture interface: v2.00 > > [ 0.766793] pps_core: LinuxPPS API ver. 1 registered > > [ 0.766803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <giom...@linux.it <javascript:>> > > [ 0.766830] PTP clock support registered > > [ 0.767975] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 > > [ 0.769124] Advanced Linux Sound Architecture Driver Initialized. > > [ 0.769955] NetLabel: Initializing > > [ 0.769971] NetLabel: domain hash size = 128 > > [ 0.769979] NetLabel: protocols = UNLABELED CIPSOv4 > > [ 0.770055] NetLabel: unlabeled traffic allowed by default > > [ 0.773170] clocksource: Switched to clocksource timer1 > > [ 0.888492] VFS: Disk quotas dquot_6.6.0 > > [ 0.888624] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes) > > [ 0.889038] AppArmor: AppArmor Filesystem Enabled > > [ 0.904705] NET: Registered protocol family 2 > > [ 0.905784] TCP established hash table entries: 4096 (order: 2, 16384 > bytes) > > [ 0.905838] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) > > [ 0.905899] TCP: Hash tables configured (established 4096 bind 4096) > > [ 0.905981] UDP hash table entries: 256 (order: 1, 8192 bytes) > > [ 0.906005] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) > > [ 0.906360] NET: Registered protocol family 1 > > [ 0.915266] RPC: Registered named UNIX socket transport module. > > [ 0.915288] RPC: Registered udp transport module. > > [ 0.915296] RPC: Registered tcp transport module. > > [ 0.915303] RPC: Registered tcp NFSv4.1 backchannel transport module. > > [ 0.916237] Unpacking initramfs... > > [ 1.089234] random: fast init done > > [ 1.303638] Freeing initrd memory: 5668K > > [ 1.304265] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 > counters available > > [ 1.308209] audit: initializing netlink subsys (disabled) > > [ 1.308326] audit: type=2000 audit(1.236:1): initialized > > [ 1.313943] workingset: timestamp_bits=14 max_order=17 bucket_order=3 > > [ 1.324301] zbud: loaded > > [ 1.332751] NFS: Registering the id_resolver key type > > [ 1.332803] Key type id_resolver registered > > [ 1.332813] Key type id_legacy registered > > [ 1.332833] nfs4filelayout_init: NFSv4 File Layout Driver > Registering... > > [ 1.333306] fuse init (API version 7.26) > > [ 1.334497] orangefs_debugfs_init: called with debug mask: :none: :0: > > [ 1.334794] orangefs_init: module version upstream loaded > > [ 1.334807] SGI XFS with ACLs, security attributes, realtime, no > debug enabled > > [ 1.349314] Key type asymmetric registered > > [ 1.349340] Asymmetric key parser 'x509' registered > > [ 1.349489] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 245) > > [ 1.353830] io scheduler noop registered > > [ 1.353847] io scheduler deadline registered > > [ 1.354175] io scheduler cfq registered (default) > > [ 1.356922] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > > [ 1.364105] gpio-of-helper ocp:cape-universal: ready > > [ 1.376588] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc > handle > > [ 1.379032] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled > > [ 1.382803] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, > base_baud = 3000000) is a 8250 > > [ 2.221212] console [ttyS0] enabled > > [ 2.225818] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, > base_baud = 3000000) is a 8250 > > [ 2.235709] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, > base_baud = 3000000) is a 8250 > > [ 2.245660] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 161, > base_baud = 3000000) is a 8250 > > [ 2.258091] omap_rng 48310000.rng: OMAP Random Number Generator ver. > 20 > > [ 2.265307] [drm] Initialized > > [ 2.272322] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > > [ 2.279674] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > > [ 2.286884] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > > [ 2.294058] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > > [ 2.323486] eqep 48300180.eqep: ver. 1.0 > > [ 2.327757] eqep 48300180.eqep: count_mode:0 > > [ 2.332105] eqep 48300180.eqep: invert_qa:1 > > [ 2.336336] eqep 48300180.eqep: invert_qb:1 > > [ 2.340563] eqep 48300180.eqep: invert_qi:0 > > [ 2.344788] eqep 48300180.eqep: invert_qs:0 > > [ 2.349014] eqep 48300180.eqep: swap_inputs:0 > > [ 2.353416] eqep 48300180.eqep: QDECCTL:0x0180 > > [ 2.357902] eqep 48300180.eqep: QPOSINIT:0x00000000 > > [ 2.362823] eqep 48300180.eqep: QPOSMAX:0xffffffff > > [ 2.367658] eqep 48300180.eqep: QPOSCNT:0x00000000 > > [ 2.372495] eqep 48300180.eqep: omit_interrupt:0 > > [ 2.377169] eqep 48300180.eqep: QEINT:0x0800 > > [ 2.381479] eqep 48300180.eqep: QUPRD:0x05f5e100 > > [ 2.386138] eqep 48300180.eqep: QEPCTL:0x009e write > > [ 2.391059] eqep 48300180.eqep: QEPCTL:0x009e read > > [ 2.395915] eqep 48300180.eqep: irq:193, clk_rate:100000000 > > [ 2.401856] eqep 48302180.eqep: ver. 1.0 > > [ 2.406016] eqep 48302180.eqep: count_mode:0 > > [ 2.410350] eqep 48302180.eqep: invert_qa:1 > > [ 2.414579] eqep 48302180.eqep: invert_qb:1 > > [ 2.418805] eqep 48302180.eqep: invert_qi:0 > > [ 2.423032] eqep 48302180.eqep: invert_qs:0 > > [ 2.427257] eqep 48302180.eqep: swap_inputs:0 > > [ 2.431656] eqep 48302180.eqep: QDECCTL:0x0180 > > [ 2.436142] eqep 48302180.eqep: QPOSINIT:0x00000000 > > [ 2.441063] eqep 48302180.eqep: QPOSMAX:0xffffffff > > [ 2.445900] eqep 48302180.eqep: QPOSCNT:0x00000000 > > [ 2.450735] eqep 48302180.eqep: omit_interrupt:0 > > [ 2.455405] eqep 48302180.eqep: QEINT:0x0800 > > [ 2.459717] eqep 48302180.eqep: QUPRD:0x05f5e100 > > [ 2.464377] eqep 48302180.eqep: QEPCTL:0x009e write > > [ 2.469299] eqep 48302180.eqep: QEPCTL:0x009e read > > [ 2.474149] eqep 48302180.eqep: irq:194, clk_rate:100000000 > > [ 2.479999] eqep 48304180.eqep: ver. 1.0 > > [ 2.484128] eqep 48304180.eqep: count_mode:0 > > [ 2.488462] eqep 48304180.eqep: invert_qa:1 > > [ 2.492692] eqep 48304180.eqep: invert_qb:1 > > [ 2.496919] eqep 48304180.eqep: invert_qi:0 > > [ 2.501165] eqep 48304180.eqep: invert_qs:0 > > [ 2.505390] eqep 48304180.eqep: swap_inputs:0 > > [ 2.509789] eqep 48304180.eqep: QDECCTL:0x0180 > > [ 2.514275] eqep 48304180.eqep: QPOSINIT:0x00000000 > > [ 2.519196] eqep 48304180.eqep: QPOSMAX:0xffffffff > > [ 2.524030] eqep 48304180.eqep: QPOSCNT:0x00000000 > > [ 2.528867] eqep 48304180.eqep: omit_interrupt:0 > > [ 2.533530] eqep 48304180.eqep: QEINT:0x0800 > > [ 2.537841] eqep 48304180.eqep: QUPRD:0x05f5e100 > > [ 2.542500] eqep 48304180.eqep: QEPCTL:0x009e write > > [ 2.547421] eqep 48304180.eqep: QEPCTL:0x009e read > > [ 2.552270] eqep 48304180.eqep: irq:196, clk_rate:100000000 > > [ 2.566331] libphy: Fixed MDIO Bus: probed > > [ 2.571671] CAN device driver interface > > [ 2.577382] c_can_platform 481cc000.can: c_can_platform device > registered (regs=fa1cc000, irq=168) > > [ 2.587570] c_can_platform 481d0000.can: c_can_platform device > registered (regs=fa1d0000, irq=169) > > [ 2.653259] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 > > [ 2.659438] davinci_mdio 4a101000.mdio: detected phy mask fffffffe > > [ 2.666595] davinci_mdio: dt: updated phy_id[0] from > phy_mask[fffffffe] > > [ 2.687858] libphy: 4a101000.mdio: probed > > [ 2.692228] davinci_mdio 4a101000.mdio: phy[0]: device > 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 > > [ 2.702629] cpsw 4a100000.ethernet: Detected MACID = > 94:e3:6d:ce:1d:e3 > > [ 2.709518] cpsw 4a100000.ethernet: cpts: overflow check period 1250 > (jiffies) > > [ 2.721071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver > > [ 2.727809] ehci-pci: EHCI PCI platform driver > > [ 2.732420] ehci-platform: EHCI generic platform driver > > [ 2.738194] ehci-omap: OMAP-EHCI Host Controller driver > > [ 2.744638] usbcore: registered new interface driver usb-storage > > [ 2.754082] 47401300.usb-phy supply vcc not found, using dummy > regulator > > [ 2.767417] 47401b00.usb-phy supply vcc not found, using dummy > regulator > > [ 2.778688] musb-hdrc musb-hdrc.1: MUSB HDRC host driver > > [ 2.784137] musb-hdrc musb-hdrc.1: new USB bus registered, assigned > bus number 1 > > [ 2.791898] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > > [ 2.798763] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > > [ 2.806046] usb usb1: Product: MUSB HDRC host driver > > [ 2.811056] usb usb1: Manufacturer: Linux 4.9.105-ti-r114 musb-hcd > > [ 2.817287] usb usb1: SerialNumber: musb-hdrc.1 > > [ 2.823013] hub 1-0:1.0: USB hub found > > [ 2.827000] hub 1-0:1.0: 1 port detected > > [ 2.844999] omap_rtc 44e3e000.rtc: already running > > [ 2.850495] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc > as rtc0 > > [ 2.859598] i2c /dev entries driver > > [ 2.866480] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout > 60 sec > > [ 2.875305] cpuidle: enable-method property 'ti,am3352' found > operations > > [ 2.884159] omap_hsmmc 48060000.mmc: Got CD GPIO > > [ 2.971686] ledtrig-cpu: registered to indicate activity on CPUs > > [ 2.982014] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 > > [ 2.988187] omap-aes 53500000.aes: will run requests pump with > realtime priority > > [ 2.998580] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 > > [ 3.010831] hidraw: raw HID events driver (C) Jiri Kosina > > [ 3.017492] usbcore: registered new interface driver usbhid > > [ 3.023212] usbhid: USB HID core driver > > [ 3.027823] remoteproc remoteproc0: wkup_m3 is available > > [ 3.043683] wireguard: WireGuard 0.0.20180809 loaded. See > www.wireguard.com for information. > > [ 3.052580] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld < > ja...@zx2c4.com <javascript:>>. All Rights Reserved. > > [ 3.063743] NET: Registered protocol family 10 > > [ 3.069233] mmc1: new high speed MMC card at address 0001 > > [ 3.079666] mip6: Mobile IPv6 > > [ 3.083313] NET: Registered protocol family 17 > > [ 3.087915] mmcblk1: mmc1:0001 M62704 3.56 GiB > > [ 3.093104] can: controller area network core (rev 20120528 abi 9) > > [ 3.099424] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB > > [ 3.106042] NET: Registered protocol family 29 > > [ 3.110612] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB > > [ 3.118038] mmcblk1: p1 > > [ 3.123825] Key type dns_resolver registered > > [ 3.128217] mpls_gso: MPLS GSO support > > [ 3.132330] omap_voltage_late_init: Voltage driver support not added > > [ 3.139435] PM: Cannot get wkup_m3_ipc handle > > [ 3.144089] ThumbEE CPU extension supported. > > [ 3.148447] Registering SWP/SWPB emulation handler > > [ 3.154366] registered taskstats version 1 > > [ 3.158680] zswap: loaded using pool lzo/zbud > > [ 3.170064] Btrfs loaded, crc32c=crc32c-generic > > [ 3.208858] Key type encrypted registered > > [ 3.213370] AppArmor: AppArmor sha1 policy hashing enabled > > [ 3.237305] usb 1-1: new high-speed USB device number 2 using > musb-hdrc > > [ 3.376073] tda998x 0-0070: found TDA19988 > > [ 3.381389] usb 1-1: New USB device found, idVendor=0409, > idProduct=005a > > [ 3.388891] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) > > [ 3.388908] [drm] Supports vblank timestamp caching Rev 2 > (21.10.2013). > > [ 3.388911] [drm] No driver support for vblank timestamp query. > > [ 3.395428] tilcdc 4830e000.lcdc: No connectors reported connected > with modes > > [ 3.395446] [drm] Cannot find any crtc or sizes - going 1024x768 > > [ 3.429212] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > > [ 3.430391] hub 1-1:1.0: USB hub found > > [ 3.430486] hub 1-1:1.0: 4 ports detected > > [ 3.432382] Console: switching to colour frame buffer device 128x48 > > [ 3.459744] tilcdc 4830e000.lcdc: fb0: frame buffer device > > [ 3.492328] input: tps65217_pwr_but as > /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 > > > > [ 3.503745] tps65217 0-0024: TPS65217 ID 0xe version 1.2 > > [ 3.509653] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > > [ 3.516711] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz > > [ 3.523876] remoteproc remoteproc0: powering up wkup_m3 > > [ 3.532431] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp > mapping ok > > [ 3.541453] PM: Cannot get wkup_m3_ipc handle > > [ 3.542738] omap_rtc 44e3e000.rtc: setting system clock to 2020-10-23 > 23:18:19 UTC (1603495099) > > [ 3.542748] of_cfs_init > > [ 3.542895] of_cfs_init: OK > > [ 3.543989] ALSA device list: > > [ 3.543997] #0: TI BeagleBone Black > > [ 3.572027] Freeing unused kernel memory: 1024K > > [ 3.576752] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217168 > > [ 3.577024] remoteproc remoteproc0: remote processor wkup_m3 is now > up > > [ 3.577047] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = > 0x193 > > Loading, please wait... > > starting version 232 > > [ 3.682086] random: systemd-udevd: uninitialized urandom read (16 > bytes read) > > [ 3.702389] random: systemd-udevd: uninitialized urandom read (16 > bytes read) > > [ 3.710652] random: udevadm: uninitialized urandom read (16 bytes > read) > > [ 3.725292] usb 1-1.1: new full-speed USB device number 3 using > musb-hdrc > > [ 3.827661] usb 1-1.1: New USB device found, idVendor=046d, > idProduct=c534 > > [ 3.841354] usb 1-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > > [ 3.857365] usb 1-1.1: Product: USB Receiver > > [ 3.865345] usb 1-1.1: Manufacturer: Logitech > > [ 3.900483] input: Logitech USB Receiver as > /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1 > > > > [ 3.997520] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID > v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input0 > > [ 4.028330] PM: bootloader does not support rtc-only! > > [ 4.045429] input: Logitech USB Receiver as > /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2 > > > > [ 4.108332] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: > USB HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input1 > > Begin: Loading essential drivers ... done. > > Begin: Running /scripts/init-premount ... done. > > Begin: Mounting root file system ... Begin: Running /scripts/local-top > ... done. > > Begin: Running /scripts/local-premount ... Scanning for Btrfs > filesystems > > done. > > Begin: Will now check root file system ... fsck from util-linux 2.29.2 > > [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1 > > rootfs: clean, 49947/233392 files, 414922/932864 blocks > > done. > > [ 7.267585] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data > mode. Opts: (null) > > done. > > Begin: Running /scripts/local-bottom ... done. > > Begin: Running /scripts/init-bottom ... done. > > [ 7.693432] ip_tables: (C) 2000-2006 Netfilter Core Team > > [ 7.733943] systemd[1]: systemd 232 running in system mode. (+PAM > +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP > +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > > [ 7.752939] systemd[1]: Detected architecture arm. > > > > Welcome to Debian GNU/Linux 9 (stretch)! > > > > [ 7.778780] systemd[1]: Set hostname to <G5-HMI>. > > [ 8.343491] systemd[1]: Listening on /dev/initctl Compatibility Named > Pipe. > > [ OK ] Listening on /dev/initctl Compatibility Named Pipe. > > [ 8.370389] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > > [ OK ] Started Forward Password Requests to Wall Directory Watch. > > [ 8.394494] systemd[1]: Listening on Journal Socket. > > [ OK ] Listening on Journal Socket. > > [ 8.410526] systemd[1]: Listening on udev Control Socket. > > [ OK ] Listening on udev Control Socket. > > [ 8.426642] systemd[1]: Listening on Journal Audit Socket. > > [ OK ] Listening on Journal Audit Socket. > > [ 8.442243] systemd[1]: Listening on udev Kernel Socket. > > [ OK ] Listening on udev Kernel Socket. > > [ 8.459277] systemd[1]: Created slice User and Session Slice. > > [ OK ] Created slice User and Session Slice. > > [ OK ] Listening on RPCbind Server Activation Socket. > > [ OK ] Listening on Journal Socket (/dev/log). > > [ OK ] Set up automount Arbitrary Executab…rmats File System Automount > Point. > > [ OK ] Started Dispatch Password Requests to Console Directory Watch. > > [ OK ] Reached target Paths. > > [ OK ] Reached target Encrypted Volumes. > > [ OK ] Reached target Swap. > > [ OK ] Created slice System Slice. > > [ OK ] Created slice system-serial\x2dgetty.slice. > > [ OK ] Reached target Slices. > > Starting Create list of required st…ce nodes for the current > kernel... > > Mounting RPC Pipe File System... > > Mounting /sys/kernel/debug... > > Mounting POSIX Message Queue File System... > > [ OK ] Created slice system-getty.slice. > > [ OK ] Listening on fsck to fsckd communication Socket. > > Starting Remount Root and Kernel File Systems... > > [ OK ] Listening on Syslog Socket. > > Starting Journal Service... > > Starting Load Kernel Modules... > > [ 8.950444] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro > > [ OK ] Mounted RPC Pipe File System. > > [ OK ] Mounted POSIX Message Queue File System. > > [ OK ] Mounted /sys/kernel/debug. > > [ OK ] Started Create list of required sta…vice nodes for the current > kernel. > > [ OK ] Started Remount Root and Kernel File Systems. > > [ OK ] Started Load Kernel Modules. > > Mounting Configuration File System... > > Starting Apply Kernel Variables... > > Mounting FUSE Control File System... > > Starting Load/Save Random Seed... > > Starting udev Coldplug all Devices... > > Starting Create Static Device Nodes in /dev... > > [ OK ] Mounted FUSE Control File System. > > [ OK ] Mounted Configuration File System. > > [ OK ] Started Apply Kernel Variables. > > [ OK ] Started Load/Save Random Seed. > > [ OK ] Started Create Static Device Nodes in /dev. > > Starting udev Kernel Device Manager... > > [ OK ] Reached target Local File Systems (Pre). > > [ OK ] Reached target Local File Systems. > > Starting Raise network interfaces... > > Starting Preprocess NFS configuration... > > [ OK ] Started Journal Service. > > Starting Flush Journal to Persistent Storage... > > [ OK ] Started Preprocess NFS configuration. > > [ OK ] Reached target NFS client services. > > [ OK ] Started udev Kernel Device Manager. > > [ 10.239654] systemd-journald[377]: Received request to flush runtime > journal from PID 1 > > [ OK ] Started Flush Journal to Persistent Storage. > > Starting Create Volatile Files and Directories... > > [ OK ] Started Create Volatile Files and Directories. > > Starting Update UTMP about System Boot/Shutdown... > > Starting RPC bind portmap service... > > Starting Network Time Synchronization... > > [ OK ] Started RPC bind portmap service. > > [ OK ] Reached target RPC Port Mapper. > > [ OK ] Reached target Remote File Systems (Pre). > > [ OK ] Reached target Remote File Systems. > > [ OK ] Started Update UTMP about System Boot/Shutdown. > > [ OK ] Started Network Time Synchronization. > > [ OK ] Reached target System Time Synchronized. > > [ 11.749748] net eth0: initializing cpsw version 1.12 (0) > > [ 11.760783] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 > > [ 11.783249] cpsw 4a100000.ethernet: ALE Table size 1024 > > [ 11.874030] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY > driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1) > > [ 11.927941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > > [ OK ] Started udev Coldplug all Devices. > > [ OK ] Reached target System Initialization. > > [ OK ] Listening on D-Bus System Message Bus Socket. > > [ OK ] Reached target Sockets. > > [ OK ] Reached target Basic System. > > Starting VS5 bootsplash... > > Starting Generic Board Startup... > > Starting BB WL18xx wlan0 Service... > > Starting System Logging Service... > > [ OK ] Started Regular background program processing daemon. > > [ OK ] Started D-Bus System Message Bus. > > [ OK ] Started Vision Series 5 Human Machine Interface. > > [ OK ] Started Daily apt download activities. > > [ OK ] Started Daily apt upgrade and clean activities. > > Starting Login Service... > > [ OK ] Started Daily Cleanup of Temporary Directories. > > [ OK ] Reached target Timers. > > [ OK ] Started System Logging Service. > > [ OK ] Started VS5 bootsplash. > > [ OK ] Started BB WL18xx wlan0 Service. > > [ OK ] Started Login Service. > > [ 13.958047] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - > flow control rx/tx > > [ 13.983815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > [ 15.172766] using random self ethernet address > > [ 15.181401] using random host ethernet address > > [ 15.241434] using random self ethernet address > > [ 15.249548] using random host ethernet address > > [ OK ] Found device /dev/ttyS0. > > [ 15.443293] usb0: HOST MAC 94:e3:6d:ce:1d:e4 > > [ 15.453631] usb0: MAC 94:e3:6d:ce:1d:e5 > > [ 15.464216] usb1: HOST MAC 94:e3:6d:ce:1d:e7 > > [ 15.477534] usb1: MAC 94:e3:6d:ce:1d:e8 > > [ 15.834803] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready > > [ 16.053104] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready > > [ 16.492728] random: crng init done > > [ 16.496182] random: 7 urandom warning(s) missed due to ratelimiting > > [ OK ] Started Raise network interfaces. > > [ OK ] Reached target Network. > > Starting dnsmasq - A lightweight DHCP and caching DNS server... > > Starting OpenBSD Secure Shell server... > > Starting Permit User Sessions... > > [ OK ] Started Permit User Sessions. > > [ OK ] Started Serial Getty on ttyS0. > > [ OK ] Started Getty on tty1. > > [ 21.198215] pvrsrvkm: loading out-of-tree module taints kernel. > > [ OK ] Started OpenBSD Secure Shell server. > > [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. > > [ OK ] Reached target Host and Network Name Lookups. > > [ 21.990046] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 > > [ OK ] Reached target Sound Card. > > [ OK ] Found device /dev/ttyGS0. > > [ OK ] Started Serial Getty on ttyGS0. > > [ OK ] Reached target Login Prompts. > > [ OK ] Started Generic Board Startup. > > Starting BB WL18xx Bluetooth Service... > > [ OK ] Started BB WL18xx Bluetooth Service. > > [ OK ] Reached target Multi-User System. > > [ OK ] Reached target Graphical Interface. > > Starting Update UTMP about System Runlevel Changes... > > [ OK ] Started Update UTMP about System Runlevel Changes. > > > > Debian GNU/Linux 9 G5-HMI ttyS0 > > > > BeagleBoard.org Debian Image 2018-01-21 > > > > G5-HMI login: > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to beagl...@googlegroups.com <javascript:>. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/6f6e84c8-0620-4a74-8f7f-ba28fdbd6e0bo%40googlegroups.com. > > > > > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b8a1cb9d-7672-4931-9c57-c239b522545bo%40googlegroups.com.
