I bet it's bb-cape-overlays, just lock it: sudo apt-mark hold bb-cape-overlays
Regards, On Fri, Oct 23, 2020 at 6:50 PM Hartley Sweeten <bigguin...@gmail.com> wrote: > > Here's the rest. This is all before the 'apt upgrade'. > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Linux version 4.9.105-ti-r114 (root@a5-imx6q-wandboard-2gb) > (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Fri Aug > 17 11:05:53 UTC 2018 > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > [ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black > [ 0.000000] efi: Getting EFI parameters from FDT: > [ 0.000000] efi: UEFI not found. > [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 > [ 0.000000] Memory policy: Data cache writeback > [ 0.000000] CPU: All CPU(s) started in SVC mode. > [ 0.000000] AM335X ES2.1 (sgx neon) > [ 0.000000] percpu: Embedded 15 pages/cpu @df902000 s31820 r8192 d21428 > u61440 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 129412 > [ 0.000000] Kernel command line: console=ttyO0,115200n8 > bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.000000] Memory: 440220K/522240K available (12288K kernel code, 1139K > rwdata, 4324K rodata, 1024K init, 459K bss, 32868K reserved, 49152K > cma-reserved, 0K highmem) > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > [ 0.000000] .text : 0xc0008000 - 0xc0d00000 (13280 kB) > [ 0.000000] .init : 0xc1300000 - 0xc1400000 (1024 kB) > [ 0.000000] .data : 0xc1400000 - 0xc151cd58 (1140 kB) > [ 0.000000] .bss : 0xc151e000 - 0xc1590ff0 ( 460 kB) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] Build-time adjustment of leaf fanout to 32. > [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 > interrupts > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz > [ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every > 89478484971ns > [ 0.000051] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 79635851949 ns > [ 0.000066] OMAP clocksource: timer1 at 24000000 Hz > [ 0.002095] clocksource_probe: no matching clocksources found > [ 0.002417] Console: colour dummy device 80x30 > [ 0.002452] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' > [ 0.002461] This ensures that you still see kernel messages. Please > [ 0.002469] update your kernel commandline. > [ 0.002496] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) > [ 0.020746] pid_max: default: 32768 minimum: 301 > [ 0.021016] Security Framework initialized > [ 0.021034] Yama: becoming mindful. > [ 0.021093] AppArmor: AppArmor initialized > [ 0.021181] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.021194] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.022359] CPU: Testing write buffer coherency: ok > [ 0.022433] ftrace: allocating 39262 entries in 116 pages > [ 0.133533] CPU0: thread -1, cpu 0, socket -1, mpidr 0 > [ 0.133613] Setting up static identity map for 0x80100000 - 0x80100060 > [ 0.167804] EFI services will not be available. > [ 0.180740] Brought up 1 CPUs > [ 0.180760] SMP: Total of 1 processors activated (995.32 BogoMIPS). > [ 0.180770] CPU: All CPU(s) started in SVC mode. > [ 0.182399] devtmpfs: initialized > [ 0.221055] VFP support v0.3: implementor 41 architecture 3 part 30 > variant c rev 3 > [ 0.221635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 7645041785100000 ns > [ 0.221668] futex hash table entries: 256 (order: 2, 16384 bytes) > [ 0.225444] xor: measuring software checksum speed > [ 0.264759] arm4regs : 1217.000 MB/sec > [ 0.304710] 8regs : 1091.000 MB/sec > [ 0.344709] 32regs : 1088.000 MB/sec > [ 0.384709] neon : 1665.000 MB/sec > [ 0.384720] xor: using function: neon (1665.000 MB/sec) > [ 0.384742] pinctrl core: initialized pinctrl subsystem > [ 0.386235] NET: Registered protocol family 16 > [ 0.390094] DMA: preallocated 1024 KiB pool for atomic coherent allocations > [ 0.459089] omap_hwmod: debugss: _wait_target_disable failed > [ 0.508757] cpuidle: using governor ladder > [ 0.520738] cpuidle: using governor menu > [ 0.537011] OMAP GPIO hardware version 0.1 > [ 0.563807] No ATAGs? > [ 0.563839] hw-breakpoint: debug architecture 0x4 unsupported. > [ 0.564659] omap4_sram_init:Unable to allocate sram needed to handle > errata I688 > [ 0.564679] omap4_sram_init:Unable to get sram pool needed to handle > errata I688 > [ 0.676779] raid6: neonx2 gen() 1882 MB/s > [ 0.744731] raid6: neonx2 xor() 1157 MB/s > [ 0.744743] raid6: using algorithm neonx2 gen() 1882 MB/s > [ 0.744753] raid6: .... xor() 1157 MB/s, rmw enabled > [ 0.744762] raid6: using intx1 recovery algorithm > [ 0.755709] edma 49000000.edma: TI EDMA DMA engine driver > [ 0.761939] SCSI subsystem initialized > [ 0.762379] usbcore: registered new interface driver usbfs > [ 0.762459] usbcore: registered new interface driver hub > [ 0.762650] usbcore: registered new device driver usb > [ 0.763783] omap_i2c 44e0b000.i2c: could not find pctldev for node > /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe > [ 0.764863] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz > [ 0.766334] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz > [ 0.766627] media: Linux media interface: v0.10 > [ 0.766700] Linux video capture interface: v2.00 > [ 0.766793] pps_core: LinuxPPS API ver. 1 registered > [ 0.766803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <giome...@linux.it> > [ 0.766830] PTP clock support registered > [ 0.767975] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 > [ 0.769124] Advanced Linux Sound Architecture Driver Initialized. > [ 0.769955] NetLabel: Initializing > [ 0.769971] NetLabel: domain hash size = 128 > [ 0.769979] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.770055] NetLabel: unlabeled traffic allowed by default > [ 0.773170] clocksource: Switched to clocksource timer1 > [ 0.888492] VFS: Disk quotas dquot_6.6.0 > [ 0.888624] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.889038] AppArmor: AppArmor Filesystem Enabled > [ 0.904705] NET: Registered protocol family 2 > [ 0.905784] TCP established hash table entries: 4096 (order: 2, 16384 > bytes) > [ 0.905838] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.905899] TCP: Hash tables configured (established 4096 bind 4096) > [ 0.905981] UDP hash table entries: 256 (order: 1, 8192 bytes) > [ 0.906005] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) > [ 0.906360] NET: Registered protocol family 1 > [ 0.915266] RPC: Registered named UNIX socket transport module. > [ 0.915288] RPC: Registered udp transport module. > [ 0.915296] RPC: Registered tcp transport module. > [ 0.915303] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.916237] Unpacking initramfs... > [ 1.089234] random: fast init done > [ 1.303638] Freeing initrd memory: 5668K > [ 1.304265] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 > counters available > [ 1.308209] audit: initializing netlink subsys (disabled) > [ 1.308326] audit: type=2000 audit(1.236:1): initialized > [ 1.313943] workingset: timestamp_bits=14 max_order=17 bucket_order=3 > [ 1.324301] zbud: loaded > [ 1.332751] NFS: Registering the id_resolver key type > [ 1.332803] Key type id_resolver registered > [ 1.332813] Key type id_legacy registered > [ 1.332833] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [ 1.333306] fuse init (API version 7.26) > [ 1.334497] orangefs_debugfs_init: called with debug mask: :none: :0: > [ 1.334794] orangefs_init: module version upstream loaded > [ 1.334807] SGI XFS with ACLs, security attributes, realtime, no debug > enabled > [ 1.349314] Key type asymmetric registered > [ 1.349340] Asymmetric key parser 'x509' registered > [ 1.349489] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 245) > [ 1.353830] io scheduler noop registered > [ 1.353847] io scheduler deadline registered > [ 1.354175] io scheduler cfq registered (default) > [ 1.356922] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size > 568 > [ 1.364105] gpio-of-helper ocp:cape-universal: ready > [ 1.376588] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle > [ 1.379032] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled > [ 1.382803] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, > base_baud = 3000000) is a 8250 > [ 2.221212] console [ttyS0] enabled > [ 2.225818] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, > base_baud = 3000000) is a 8250 > [ 2.235709] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, > base_baud = 3000000) is a 8250 > [ 2.245660] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 161, > base_baud = 3000000) is a 8250 > [ 2.258091] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 > [ 2.265307] [drm] Initialized > [ 2.272322] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write > [ 2.279674] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write > [ 2.286884] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write > [ 2.294058] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write > [ 2.323486] eqep 48300180.eqep: ver. 1.0 > [ 2.327757] eqep 48300180.eqep: count_mode:0 > [ 2.332105] eqep 48300180.eqep: invert_qa:1 > [ 2.336336] eqep 48300180.eqep: invert_qb:1 > [ 2.340563] eqep 48300180.eqep: invert_qi:0 > [ 2.344788] eqep 48300180.eqep: invert_qs:0 > [ 2.349014] eqep 48300180.eqep: swap_inputs:0 > [ 2.353416] eqep 48300180.eqep: QDECCTL:0x0180 > [ 2.357902] eqep 48300180.eqep: QPOSINIT:0x00000000 > [ 2.362823] eqep 48300180.eqep: QPOSMAX:0xffffffff > [ 2.367658] eqep 48300180.eqep: QPOSCNT:0x00000000 > [ 2.372495] eqep 48300180.eqep: omit_interrupt:0 > [ 2.377169] eqep 48300180.eqep: QEINT:0x0800 > [ 2.381479] eqep 48300180.eqep: QUPRD:0x05f5e100 > [ 2.386138] eqep 48300180.eqep: QEPCTL:0x009e write > [ 2.391059] eqep 48300180.eqep: QEPCTL:0x009e read > [ 2.395915] eqep 48300180.eqep: irq:193, clk_rate:100000000 > [ 2.401856] eqep 48302180.eqep: ver. 1.0 > [ 2.406016] eqep 48302180.eqep: count_mode:0 > [ 2.410350] eqep 48302180.eqep: invert_qa:1 > [ 2.414579] eqep 48302180.eqep: invert_qb:1 > [ 2.418805] eqep 48302180.eqep: invert_qi:0 > [ 2.423032] eqep 48302180.eqep: invert_qs:0 > [ 2.427257] eqep 48302180.eqep: swap_inputs:0 > [ 2.431656] eqep 48302180.eqep: QDECCTL:0x0180 > [ 2.436142] eqep 48302180.eqep: QPOSINIT:0x00000000 > [ 2.441063] eqep 48302180.eqep: QPOSMAX:0xffffffff > [ 2.445900] eqep 48302180.eqep: QPOSCNT:0x00000000 > [ 2.450735] eqep 48302180.eqep: omit_interrupt:0 > [ 2.455405] eqep 48302180.eqep: QEINT:0x0800 > [ 2.459717] eqep 48302180.eqep: QUPRD:0x05f5e100 > [ 2.464377] eqep 48302180.eqep: QEPCTL:0x009e write > [ 2.469299] eqep 48302180.eqep: QEPCTL:0x009e read > [ 2.474149] eqep 48302180.eqep: irq:194, clk_rate:100000000 > [ 2.479999] eqep 48304180.eqep: ver. 1.0 > [ 2.484128] eqep 48304180.eqep: count_mode:0 > [ 2.488462] eqep 48304180.eqep: invert_qa:1 > [ 2.492692] eqep 48304180.eqep: invert_qb:1 > [ 2.496919] eqep 48304180.eqep: invert_qi:0 > [ 2.501165] eqep 48304180.eqep: invert_qs:0 > [ 2.505390] eqep 48304180.eqep: swap_inputs:0 > [ 2.509789] eqep 48304180.eqep: QDECCTL:0x0180 > [ 2.514275] eqep 48304180.eqep: QPOSINIT:0x00000000 > [ 2.519196] eqep 48304180.eqep: QPOSMAX:0xffffffff > [ 2.524030] eqep 48304180.eqep: QPOSCNT:0x00000000 > [ 2.528867] eqep 48304180.eqep: omit_interrupt:0 > [ 2.533530] eqep 48304180.eqep: QEINT:0x0800 > [ 2.537841] eqep 48304180.eqep: QUPRD:0x05f5e100 > [ 2.542500] eqep 48304180.eqep: QEPCTL:0x009e write > [ 2.547421] eqep 48304180.eqep: QEPCTL:0x009e read > [ 2.552270] eqep 48304180.eqep: irq:196, clk_rate:100000000 > [ 2.566331] libphy: Fixed MDIO Bus: probed > [ 2.571671] CAN device driver interface > [ 2.577382] c_can_platform 481cc000.can: c_can_platform device registered > (regs=fa1cc000, irq=168) > [ 2.587570] c_can_platform 481d0000.can: c_can_platform device registered > (regs=fa1d0000, irq=169) > [ 2.653259] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 > [ 2.659438] davinci_mdio 4a101000.mdio: detected phy mask fffffffe > [ 2.666595] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] > [ 2.687858] libphy: 4a101000.mdio: probed > [ 2.692228] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, > driver SMSC LAN8710/LAN8720 > [ 2.702629] cpsw 4a100000.ethernet: Detected MACID = 94:e3:6d:ce:1d:e3 > [ 2.709518] cpsw 4a100000.ethernet: cpts: overflow check period 1250 > (jiffies) > [ 2.721071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.727809] ehci-pci: EHCI PCI platform driver > [ 2.732420] ehci-platform: EHCI generic platform driver > [ 2.738194] ehci-omap: OMAP-EHCI Host Controller driver > [ 2.744638] usbcore: registered new interface driver usb-storage > [ 2.754082] 47401300.usb-phy supply vcc not found, using dummy regulator > [ 2.767417] 47401b00.usb-phy supply vcc not found, using dummy regulator > [ 2.778688] musb-hdrc musb-hdrc.1: MUSB HDRC host driver > [ 2.784137] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus > number 1 > [ 2.791898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.798763] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.806046] usb usb1: Product: MUSB HDRC host driver > [ 2.811056] usb usb1: Manufacturer: Linux 4.9.105-ti-r114 musb-hcd > [ 2.817287] usb usb1: SerialNumber: musb-hdrc.1 > [ 2.823013] hub 1-0:1.0: USB hub found > [ 2.827000] hub 1-0:1.0: 1 port detected > [ 2.844999] omap_rtc 44e3e000.rtc: already running > [ 2.850495] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as > rtc0 > [ 2.859598] i2c /dev entries driver > [ 2.866480] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec > [ 2.875305] cpuidle: enable-method property 'ti,am3352' found operations > [ 2.884159] omap_hsmmc 48060000.mmc: Got CD GPIO > [ 2.971686] ledtrig-cpu: registered to indicate activity on CPUs > [ 2.982014] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 > [ 2.988187] omap-aes 53500000.aes: will run requests pump with realtime > priority > [ 2.998580] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 > [ 3.010831] hidraw: raw HID events driver (C) Jiri Kosina > [ 3.017492] usbcore: registered new interface driver usbhid > [ 3.023212] usbhid: USB HID core driver > [ 3.027823] remoteproc remoteproc0: wkup_m3 is available > [ 3.043683] wireguard: WireGuard 0.0.20180809 loaded. See > www.wireguard.com for information. > [ 3.052580] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld > <ja...@zx2c4.com>. All Rights Reserved. > [ 3.063743] NET: Registered protocol family 10 > [ 3.069233] mmc1: new high speed MMC card at address 0001 > [ 3.079666] mip6: Mobile IPv6 > [ 3.083313] NET: Registered protocol family 17 > [ 3.087915] mmcblk1: mmc1:0001 M62704 3.56 GiB > [ 3.093104] can: controller area network core (rev 20120528 abi 9) > [ 3.099424] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB > [ 3.106042] NET: Registered protocol family 29 > [ 3.110612] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB > [ 3.118038] mmcblk1: p1 > [ 3.123825] Key type dns_resolver registered > [ 3.128217] mpls_gso: MPLS GSO support > [ 3.132330] omap_voltage_late_init: Voltage driver support not added > [ 3.139435] PM: Cannot get wkup_m3_ipc handle > [ 3.144089] ThumbEE CPU extension supported. > [ 3.148447] Registering SWP/SWPB emulation handler > [ 3.154366] registered taskstats version 1 > [ 3.158680] zswap: loaded using pool lzo/zbud > [ 3.170064] Btrfs loaded, crc32c=crc32c-generic > [ 3.208858] Key type encrypted registered > [ 3.213370] AppArmor: AppArmor sha1 policy hashing enabled > [ 3.237305] usb 1-1: new high-speed USB device number 2 using musb-hdrc > [ 3.376073] tda998x 0-0070: found TDA19988 > [ 3.381389] usb 1-1: New USB device found, idVendor=0409, idProduct=005a > [ 3.388891] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) > [ 3.388908] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 3.388911] [drm] No driver support for vblank timestamp query. > [ 3.395428] tilcdc 4830e000.lcdc: No connectors reported connected with > modes > [ 3.395446] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 3.429212] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 3.430391] hub 1-1:1.0: USB hub found > [ 3.430486] hub 1-1:1.0: 4 ports detected > [ 3.432382] Console: switching to colour frame buffer device 128x48 > [ 3.459744] tilcdc 4830e000.lcdc: fb0: frame buffer device > [ 3.492328] input: tps65217_pwr_but as > /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 > [ 3.503745] tps65217 0-0024: TPS65217 ID 0xe version 1.2 > [ 3.509653] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write > [ 3.516711] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz > [ 3.523876] remoteproc remoteproc0: powering up wkup_m3 > [ 3.532431] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp mapping > ok > [ 3.541453] PM: Cannot get wkup_m3_ipc handle > [ 3.542738] omap_rtc 44e3e000.rtc: setting system clock to 2020-10-23 > 23:18:19 UTC (1603495099) > [ 3.542748] of_cfs_init > [ 3.542895] of_cfs_init: OK > [ 3.543989] ALSA device list: > [ 3.543997] #0: TI BeagleBone Black > [ 3.572027] Freeing unused kernel memory: 1024K > [ 3.576752] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217168 > [ 3.577024] remoteproc remoteproc0: remote processor wkup_m3 is now up > [ 3.577047] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 > Loading, please wait... > starting version 232 > [ 3.682086] random: systemd-udevd: uninitialized urandom read (16 bytes > read) > [ 3.702389] random: systemd-udevd: uninitialized urandom read (16 bytes > read) > [ 3.710652] random: udevadm: uninitialized urandom read (16 bytes read) > [ 3.725292] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc > [ 3.827661] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534 > [ 3.841354] usb 1-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 3.857365] usb 1-1.1: Product: USB Receiver > [ 3.865345] usb 1-1.1: Manufacturer: Logitech > [ 3.900483] input: Logitech USB Receiver as > /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1 > [ 3.997520] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 > Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input0 > [ 4.028330] PM: bootloader does not support rtc-only! > [ 4.045429] input: Logitech USB Receiver as > /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2 > [ 4.108332] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB > HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input1 > Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... > done. > Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems > done. > Begin: Will now check root file system ... fsck from util-linux 2.29.2 > [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1 > rootfs: clean, 49947/233392 files, 414922/932864 blocks > done. > [ 7.267585] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data > mode. Opts: (null) > done. > Begin: Running /scripts/local-bottom ... done. > Begin: Running /scripts/init-bottom ... done. > [ 7.693432] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 7.733943] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT > +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS > +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > [ 7.752939] systemd[1]: Detected architecture arm. > > Welcome to Debian GNU/Linux 9 (stretch)! > > [ 7.778780] systemd[1]: Set hostname to <G5-HMI>. > [ 8.343491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. > [ OK ] Listening on /dev/initctl Compatibility Named Pipe. > [ 8.370389] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ OK ] Started Forward Password Requests to Wall Directory Watch. > [ 8.394494] systemd[1]: Listening on Journal Socket. > [ OK ] Listening on Journal Socket. > [ 8.410526] systemd[1]: Listening on udev Control Socket. > [ OK ] Listening on udev Control Socket. > [ 8.426642] systemd[1]: Listening on Journal Audit Socket. > [ OK ] Listening on Journal Audit Socket. > [ 8.442243] systemd[1]: Listening on udev Kernel Socket. > [ OK ] Listening on udev Kernel Socket. > [ 8.459277] systemd[1]: Created slice User and Session Slice. > [ OK ] Created slice User and Session Slice. > [ OK ] Listening on RPCbind Server Activation Socket. > [ OK ] Listening on Journal Socket (/dev/log). > [ OK ] Set up automount Arbitrary Executab…rmats File System Automount > Point. > [ OK ] Started Dispatch Password Requests to Console Directory Watch. > [ OK ] Reached target Paths. > [ OK ] Reached target Encrypted Volumes. > [ OK ] Reached target Swap. > [ OK ] Created slice System Slice. > [ OK ] Created slice system-serial\x2dgetty.slice. > [ OK ] Reached target Slices. > Starting Create list of required st…ce nodes for the current > kernel... > Mounting RPC Pipe File System... > Mounting /sys/kernel/debug... > Mounting POSIX Message Queue File System... > [ OK ] Created slice system-getty.slice. > [ OK ] Listening on fsck to fsckd communication Socket. > Starting Remount Root and Kernel File Systems... > [ OK ] Listening on Syslog Socket. > Starting Journal Service... > Starting Load Kernel Modules... > [ 8.950444] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro > [ OK ] Mounted RPC Pipe File System. > [ OK ] Mounted POSIX Message Queue File System. > [ OK ] Mounted /sys/kernel/debug. > [ OK ] Started Create list of required sta…vice nodes for the current > kernel. > [ OK ] Started Remount Root and Kernel File Systems. > [ OK ] Started Load Kernel Modules. > Mounting Configuration File System... > Starting Apply Kernel Variables... > Mounting FUSE Control File System... > Starting Load/Save Random Seed... > Starting udev Coldplug all Devices... > Starting Create Static Device Nodes in /dev... > [ OK ] Mounted FUSE Control File System. > [ OK ] Mounted Configuration File System. > [ OK ] Started Apply Kernel Variables. > [ OK ] Started Load/Save Random Seed. > [ OK ] Started Create Static Device Nodes in /dev. > Starting udev Kernel Device Manager... > [ OK ] Reached target Local File Systems (Pre). > [ OK ] Reached target Local File Systems. > Starting Raise network interfaces... > Starting Preprocess NFS configuration... > [ OK ] Started Journal Service. > Starting Flush Journal to Persistent Storage... > [ OK ] Started Preprocess NFS configuration. > [ OK ] Reached target NFS client services. > [ OK ] Started udev Kernel Device Manager. > [ 10.239654] systemd-journald[377]: Received request to flush runtime > journal from PID 1 > [ OK ] Started Flush Journal to Persistent Storage. > Starting Create Volatile Files and Directories... > [ OK ] Started Create Volatile Files and Directories. > Starting Update UTMP about System Boot/Shutdown... > Starting RPC bind portmap service... > Starting Network Time Synchronization... > [ OK ] Started RPC bind portmap service. > [ OK ] Reached target RPC Port Mapper. > [ OK ] Reached target Remote File Systems (Pre). > [ OK ] Reached target Remote File Systems. > [ OK ] Started Update UTMP about System Boot/Shutdown. > [ OK ] Started Network Time Synchronization. > [ OK ] Reached target System Time Synchronized. > [ 11.749748] net eth0: initializing cpsw version 1.12 (0) > [ 11.760783] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 > [ 11.783249] cpsw 4a100000.ethernet: ALE Table size 1024 > [ 11.874030] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver > [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1) > [ 11.927941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ OK ] Started udev Coldplug all Devices. > [ OK ] Reached target System Initialization. > [ OK ] Listening on D-Bus System Message Bus Socket. > [ OK ] Reached target Sockets. > [ OK ] Reached target Basic System. > Starting VS5 bootsplash... > Starting Generic Board Startup... > Starting BB WL18xx wlan0 Service... > Starting System Logging Service... > [ OK ] Started Regular background program processing daemon. > [ OK ] Started D-Bus System Message Bus. > [ OK ] Started Vision Series 5 Human Machine Interface. > [ OK ] Started Daily apt download activities. > [ OK ] Started Daily apt upgrade and clean activities. > Starting Login Service... > [ OK ] Started Daily Cleanup of Temporary Directories. > [ OK ] Reached target Timers. > [ OK ] Started System Logging Service. > [ OK ] Started VS5 bootsplash. > [ OK ] Started BB WL18xx wlan0 Service. > [ OK ] Started Login Service. > [ 13.958047] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow > control rx/tx > [ 13.983815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 15.172766] using random self ethernet address > [ 15.181401] using random host ethernet address > [ 15.241434] using random self ethernet address > [ 15.249548] using random host ethernet address > [ OK ] Found device /dev/ttyS0. > [ 15.443293] usb0: HOST MAC 94:e3:6d:ce:1d:e4 > [ 15.453631] usb0: MAC 94:e3:6d:ce:1d:e5 > [ 15.464216] usb1: HOST MAC 94:e3:6d:ce:1d:e7 > [ 15.477534] usb1: MAC 94:e3:6d:ce:1d:e8 > [ 15.834803] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready > [ 16.053104] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready > [ 16.492728] random: crng init done > [ 16.496182] random: 7 urandom warning(s) missed due to ratelimiting > [ OK ] Started Raise network interfaces. > [ OK ] Reached target Network. > Starting dnsmasq - A lightweight DHCP and caching DNS server... > Starting OpenBSD Secure Shell server... > Starting Permit User Sessions... > [ OK ] Started Permit User Sessions. > [ OK ] Started Serial Getty on ttyS0. > [ OK ] Started Getty on tty1. > [ 21.198215] pvrsrvkm: loading out-of-tree module taints kernel. > [ OK ] Started OpenBSD Secure Shell server. > [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. > [ OK ] Reached target Host and Network Name Lookups. > [ 21.990046] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 > [ OK ] Reached target Sound Card. > [ OK ] Found device /dev/ttyGS0. > [ OK ] Started Serial Getty on ttyGS0. > [ OK ] Reached target Login Prompts. > [ OK ] Started Generic Board Startup. > Starting BB WL18xx Bluetooth Service... > [ OK ] Started BB WL18xx Bluetooth Service. > [ OK ] Reached target Multi-User System. > [ OK ] Reached target Graphical Interface. > Starting Update UTMP about System Runlevel Changes... > [ OK ] Started Update UTMP about System Runlevel Changes. > > Debian GNU/Linux 9 G5-HMI ttyS0 > > BeagleBoard.org Debian Image 2018-01-21 > > G5-HMI login: > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/6f6e84c8-0620-4a74-8f7f-ba28fdbd6e0bo%40googlegroups.com. -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgDhz1rswqS9BdC185ddW_nD8cbKE3zT-HfY_zt1dVB%2Bg%40mail.gmail.com.
