Sorry, one more: https://beagleboard.org/beaglev
Jon On Wed, Jan 13, 2021 at 8:10 AM jonnymo <jonnym...@gmail.com> wrote: > Looks like everyone is talking about it even Jason: > https://www.youtube.com/watch?v=9MJl7gCTAcM > > https://www.tomshardware.com/news/beaglev-riscv-announced > > > https://blog.adafruit.com/2021/01/13/the-risc-v-powered-beaglev-board-announced-riscv-beagleboardorg/ > > > https://arstechnica.com/gadgets/2021/01/seeed-and-beagleboard-team-up-to-provide-a-new-risc-v-based-linux-pc/ > > Jon > > On Wed, Jan 13, 2021 at 7:05 AM jonnymo <jonnym...@gmail.com> wrote: > >> This looks like another effort to use a RISC-V processor on a board so it >> will be different than an ARM core. >> >> Jon >> >> On Wednesday, January 13, 2021, johan.he...@gmail.com < >> johan.henselm...@gmail.com> wrote: >> >>> >>> I got a mail message from seeed that introduced the BeagleV. >>> >>> Although I am very hopeful for a complete opensource hardware and >>> software platform, I noticed that the pin-layout and the compatibility of >>> the ARM-Beagleboards has been abandoned. >>> >>> I also noticed on the specs that the GPIO pins could be used for any >>> kind of communication protocol, be it UART, SPI, SDIO etc. >>> >>> I am currently using 3 UART ports on a BeagleBone to communicate with >>> some peripherals. >>> >>> Would that still be possible in the new design? >>> >>> I also noted the RS485, or Canbus was not described in the IO. >>> >>> Can anyone involved in the design comment on these observations? >>> (Why abandon the old pin layout, how to implement three UARTS or 2 >>> I2C's, and why no CANBus availability) >>> >>> Kind Regards >>> Johan Henselmans >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com >>> <https://groups.google.com/d/msgid/beagleboard/3cc933a3-b647-4fe4-b24b-9ba03c478f1fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkqLDVY7%3D%3D-_3wg_GwR5C3sKrbxdFwgf7Z6zDvmpR2MB3g%40mail.gmail.com.
