1: When you do an AIO, many tests are run and the best performing parameters are identified.
If you save Optimal Parameters, they get written to the appropriate file depending on the time frame. If you then do a TA on any stock that is in the OP file the parameters in that file are automatically used for that stock, overriding the parameter set currently selected, and used for all other stocks which have NOT had AIO selected parameters saved in the OP file. 2: So, if you AIO a stock and save the parameters to the OP file, then quit B-C, then relaunch B-C, and do a TA on that same stock, it will use the parameters you saved in the OP file, you do not have to select the file or use the file, it is used automatically. Those same parameters will be used for that stock each time you TA it, until you eventually do a new TA, and save, overwriting the old saved parameters, or delete that stock from the OP file using the Stocks> AIO > delete Optimal Parameters feature. I just tested the above on that latest version of B-C and confirmed it works as I described. Rik Rasmussen Best Charts Yahoo Group Moderator http://groups.yahoo.com/group/bestcharts/ "I am not the developer of Best Charts" > -----Original Message----- > From: [email protected] [mailto:[EMAIL PROTECTED] > Behalf Of McGuyVr70 > Sent: Tuesday, August 08, 2006 10:20 PM > To: [email protected] > Subject: [BestCharts] Optimal Parameters > > > I have two questions: > > 1. After an AIO I will save the parameters for a stock. If I close BC > and reopen BC then load the parameters from file. If I then try to > display the optimal parameters the page comes up blank. I thought that > I would be able to display previous parameters from an AIO that was > saved. I know that I can view the parameters in the file itself but I > am confused as to what the load parameters from file does since it > doesn't seem to load anything. > > 2. It seems that the program does not reload any parameters from file. > I wish to reload the parameters day after day to stay constant with > the parameters for a period of time. I don't want to AIO every day. I > want to run a stock using the same parameters for several days but it > looks like the program does not load/find the stock in the parameters > file even though it exists. > > Am I missing something? Did I miss a step to reload the parameters to > run a stock again? > > Dan > > > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BestCharts/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
