Thanks for the reply
This is what I was doing.
Missing Optimal Parameters when trying to display them
Run an AIO on QQQQ
1. Open BC
2. nothing the portfolios list all of them empty
3. Upper right hand corner enter the symbol QQQQ
4. Run an AIO
5. Save parameters to the opd.txt file
6. verify the parameters in the opd.txt by opening it in notepad
7. Close BC
Load Symbol view parameters
1. Open BC
2. nothing the portfolios list all of them empty
3. Upper right hand corner enter the symbol QQQQ
4. "Display Optimal Parameters" comes up blank
After closer inspection it does look like it is using the opd.txt
file for parameters but one is missing.
BCI1 is always 1100 on the graphs, this number should be 920. It is
listed as 920 in the opd.txt file but this number is not being used.
Any reason why - I guess this is why I was confused.
Dan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BestCharts/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
