2008/10/16 Bill N <[EMAIL PROTECTED]>: > > I have the same crank with Campy. Same problem. Corrected by having > LBS tapping the hole and putting in a bolt with a "collar" (for lack > of a better word) over the bolt. The collar moves freely (like the > bolt on the end of the front derailleur cage) Used a little loctite > on the bolt. >
Seeing this a bit late, dunno if this has already been suggested. Remove the chainring. Cut a piece of rigid tube just the right length to fit between the crank and the chainring, and of a diameter to fit closely over the pin. Glue it in place. Re-assemble the chainset. -- Keith Ayres Oxfordshire, UK Argos, Trevor Jarvis Flying Gate --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Bicycle Lifestyle" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/bicyclelifestyle?hl=en -~----------~----~----~----~------~----~------~--~---
