Hello, all. I'll try to keep this as short and simple as possible. I've got 4 GB of ram in my system. About a week and a half ago, my video card ended up dying, and I bought a replacement. My old card had 256 mb of ram on it, and the new card supposedly has 512 mb of ram on it. I had a company come and install the new video card last Wednesday. Prior to the change in video card, I would have sworn that my computer was recognizing 3.0 gb of ram. I had read on more than one occasion that win XP, especially the 32 bit version simply won't recognize the full 4 GB of ram I chose to install when I built my system, and was OK with that. After the change in video card, however, my system is only recognizing 2.5 GB of ram. The technician actually came back out to investigate, as I was convinced that a ram chip may have come lose during the installation of the video card. As it turns out, all of my memory is physicly fine; is recognized by the motherboard and by software like cpuz with no problem. The tech informed me that the decrease actually happened when I installed sp3, but I can't help thinking that this is inaccurate, since, like I said above, I am pretty sure that I can remember having 3.0 gb of ram before the video card change. I realize that on the whole, the ram decrease probably isn't a big deal, but it does seem that JFW loads a bit slower when I start my system. I guess I just want some other opinions for my own piece of mind, and to know whether or not I should look into this further or just accept that this is the way things are now. Thank you all very much for your time, and I hope this makes sense to some of you. Missy -------------- next part --------------
No virus found in this outgoing message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.15/1649 - Release Date: 9/3/2008 7:15 AM Visit the JAWS Users List home page at: http://www.jaws-users.com Visit the Blind Computing home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/blind-computing@jaws-users.com/ To post to this group, send email to blind-computing@jaws-users.com To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following address in order to contact the management team [EMAIL PROTECTED] If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED]