You should be able to add an extension to the end of the washer hose. I've
found them in the store before that look like a funnel and if they don't have
those, you can ask for a short length of hose that will fit over your current
end.
There are several ways they may suggest you do this. There is what is called a
"barb" which is a section of pipe that has ridges on the outside. The barb
pushed into a hose, has a shoulder in the middle and then another length of
hose can be pushed on the other side joining the two pieces together.
----- Original Message -----
From: Betsy Whitney
To: blindhandyman-yahoogroups.com
Sent: Saturday, February 06, 2010 11:30 PM
Subject: [BlindHandyMan] Washer drainage hose splashes when emptying
Aloha all,
I have a deep laundry sink where the washer drains. When the water
hits the bottom of the sink it sometimes splashes onto the wall
beside the sink. Is there something I can put on the hose to make it stop?
TIA
Betsy
Teamwork: Together we achieve the extraordinary.
[Non-text portions of this message have been removed]
