Where is this speed setting found, either in the BrailleNote or on the PC? Wayne www.wayneism.com ----- Original Message ----- From: "Dean Jackson" <[EMAIL PROTECTED]> To: "Braillenote List" <[EMAIL PROTECTED]> Sent: Sunday, December 21, 2003 8:38 PM Subject: [Braillenote] ActiveSync
> > Hello all, > > Recently, there has been some conversation on the list about using > ActiveSync with the BrailleNote. Let me try and answer the queries from > list members. > > Firstly, remember that the com port baud rate in Windows is not meant to be > set to the actual speed that you're connecting at, rather, it is a maximum > speed. So, as long as the maximum speed is not set below the speed at which > you're trying to connect to the PC, you should be fine. Therefore, you > should not need to touch the port settings at all. > > Secondly to clarify a point, in KeySoft 4.01 and below, there are two rates > at which you can connect to ActiveSync. They are 115.2 kbps (the default), > and 19.2 kbps. In KeySoft 5 however, those two rates are still available, > but we've added a third rate which is by the way, also the default. Now you > can connect at 57.6 kbps. > > If you have any further queries, please don't hesitate to contact me. > > Regards, > > Dean Jackson > Customer/Technical Analyst > Pulse Data International Ltd. > > DDI: +64 3 373 6184 > Fax: +64-3-384 4933 > Email: > [EMAIL PROTECTED] > Internet: > www.pulsedata.com > __________________________ > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote > >
