ok, with serial connection the braille display works!
also alfabetical keyboard characters work but not enter or backspace
I think brltty commands keys for braillesense qwerty should be redefined
(they are good for the braille keyboared but not for qwerty)
On my computer usb connection doesn't work at all. Neither the first or
the second time!
I often use laptop computers without serial plug so I'd like to use
braille sense as a display braille with usb connection
thanks
Mattia
On 02/08/2011 01:50 PM, Dave Mielke wrote:
[quoted lines by Mattia Scattolin on 2011/02/08 at 11:18 +0100]
it dowsn't work at all!
I'm using usb connection.
I compiled last source (svn) of brltty and I run it in debug mode
(see attached file).
It looks to me like you might be encountering a problem which I'm indeed aware
of. If so, it's USB-specific so I expect your serial test to be successful.
The last time I tested a Braille Sense with USB on Linux, a temrporary problem
within the device was caused when Linux closed the device. In other words, the
device worked the first time, but not the second time.
Disconnecting/reconnecting the USB cable cleared the problem, but, of course,
only for one more use, after which the problem had to be cleared again. Could
you please test to see if this is the case for you?
--
** Please consider the environment before printing this email! **
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
