On Sun, Nov 09, 2003 at 11:19:29AM +0100, Jesper Malmkvist wrote:
> Jeg har ladet mig fortælle at gæringen er slut, når der er 5 min. mellem
> hvert 'blop'. Men da der hver 14 min. kommer en serie af 'blop', og ikke
> kun et enkelt, er jeg lidt i vildrede om hvorvidt jeg kan betragte
> gæringen som overstået. Jeg bruger en gærspand af plast, så der måske
> opbygges et hvis tryk, inden der kommer en udladning?
> Når brygget er klart, skal det på en Beersphere, hvis det har nogen
> betydning for ovenstående.

Yep, my plastic buckets do the same sort of bubble bursts. It has
something to do with the plasitc being somewhat elastic. Once enough
pressure has built up to push the water out of the lock, the plastic lid
has bent a bit upwards, increasing the diameter. When the lid moves
down, I bet it has some inertia, so it wants to move a bit further than
the regular zero position, thus pumping a few more bubbles out of the
lock. So the system may end up with a small underpressure. In dure time
this underpressure will be filled up with CO2, and then the pressure
increases, until it is enough to displace the water in the airlock.
Naturally we talk of small amounts of pressure here, a few mm H2O.

In practice this means that for the same gas production, a plastic
bucket will bubble in bursts, and have longer breaks in between, than a
solid glass bottle will.

Still, 14 minutes sounds like a pretty well finished fermentation. 8
days is maybe a bit short, but with the start you got, it should be
perfectly enough.

Finally, if that beersphere has some sort of overpressure relief system,
then you do not have to worry too much about it. The dangerous thing is
with bottles, the only way they can react to overpressure is by
exploding. I often keg my ales after a week of fermentation, or even
less. The fermentation continues in the keg, and occasionally I let out
some of the worst steam.

Go for it! And let it mature in the sphere for a week or seven, it will
be all the better for it!

-Heikki


-- 
Heikki Levanto  LSD - Levanto Software Development   <[EMAIL PROTECTED]>



Besvar via email