Straight from my Linux kernel bootup:
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPB3043ATU, ATA DISK drive
hdb: JTS Corp. CHAMP Model C2000-3AF, ATA DISK drive
hdc: HP CD-Writer+ 7200, ATAPI CDROM drive
hdd: MATSHITA CR-587, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MPB3043ATU, 4125MB w/0kB Cache, CHS=525/255/63
hdb: JTS Corp. CHAMP Model C2000-3AF, 1910MB w/128kB Cache, CHS=3882/16/63
hdd: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
I could also check what the bios thinks everything is, but for that I
have to reboot! So if this isn't enough I'll email that too. is this
enough? The bios prolly gives the same readings too...
thanks in advance for any help!
On Sun, Jul 04, 1999 at 02:43:27PM +0900, OKUJI Yoshinori wrote:
> From: shawn <[EMAIL PROTECTED]>
> Subject: problems installing GRUB on a hardrive
> Date: Sat, 3 Jul 1999 22:11:01 -0700
>
> > the problem arises when I try to install GRUB on the HD (in this case
> > the primary master)
>
> Tell us the geometry and the partition tables.
>
> ----------------------------------------------------------------------
> OKUJI Yoshinori <[EMAIL PROTECTED]> ^o-o^
> http://duff.kuicr.kyoto-u.ac.jp/~okuji (in English) m /
--
"They call me...The Searcher!"
-- The Searcher
