Thank you for your help. On Thu, Jun 4, 2009 at 1:45 PM, Max CtRiX <[email protected]<ctrix%[email protected]> > wrote:
> Matthew Lockwood ha scritto: > > Hi, > > > > I've just installed CW. I'm using the default out of the box config, but > > when I port scan the server to see whether port 5060 is open I get > > nothing even though there is no firewall running, and netstat reports > > that it is listening on this port. What's happening? I briefly tried > > FreeSwitch under exactly the same setup, and the server always responded > > on this port. > > > Is there something I'm missing? > > Lot's of things. > > 1) It's UDP, not TCP. > Port scanning a UDP port doesn't always says it's open if it's open. > If you don't get any packet back, the scanner says it's closed. > Read Nmap manual and you'll understand. > > 2) don't compare to freeswitch. > Freeswitch uses also TCP for SIP. > Are you trying to scan on TCP or UDP ? > > 3) i can't understand if this is a problem or not. > If it's not a problem and CW works, then this is the wrong place to ask > about IP protocols questions. > If it's a problem/bug/misbehaviour, then you'd at least say which > release you're using and post at least some logs. > > 4) Referring to the post where you say that it doesn't make/receives > calls, go back to 3) and post some logs. > My crystal ball is broken, ATM > > 5) make sure you have asterisk and Freeswitch turned off and not running > at the same time. > > Max > > > > _______________________________________________ > Callweaver-users mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-users >
_______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
