I uninstalled IPTables completely, and tried this. Actually, I went back to
FreeSwitch yesterday. :-)

On Fri, Jun 5, 2009 at 4:29 AM, Gerald Cox <[email protected]> wrote:

> U can easily tell if the port's being blocked by temporarily disabling
> iptables with `/etc/init.d/iptables stop`.  Then test callweaver.
> Re-enable iptables after testing.
>
>
> On Thu, 2009-06-04 at 12:14 -0700, Matthew Lockwood wrote:
> > Yes, and unfortunately not.
> >
> >
> >
> > On Thu, Jun 4, 2009 at 6:02 AM, Gerald Cox <[email protected]> wrote:
> >
> >
> >         Have you tried connecting a SIP phone, placing calls, or
> >         receiving
> >         calls.  Does it work?
> >
> >
> >
> >
> >         On Thu, 2009-06-04 at 10:56 -0700, Matthew Lockwood wrote:
> >         > Yeah that's all done. It's correctly configured and netstat
> >         -an shows
> >         > it's binding to 5060 on the correct IP.
> >         >
> >         >
> >         >
> >         > On Thu, Jun 4, 2009 at 4:46 AM, Gerald Cox
> >         <[email protected]> wrote:
> >         >
> >         >
> >         >         U need to configure callweaver.  Configure in a
> >         fashion
> >         >         similar to
> >         >         asterisk.  Setup the externip in sip.conf.  Also,
> >         use 'netstat
> >         >         -nap' to
> >         >         show what ports are in use.
> >         >
> >         >
> >         >
> >         >
> >         >         On Thu, 2009-06-04 at 09:30 -0700, Matthew Lockwood
> >         wrote:
> >         >         > Hi,
> >         >         >
> >         >         > I've just installed CW. I'm using the default out
> >         of the box
> >         >         config,
> >         >         > but when I port scan the server to see whether
> >         port 5060 is
> >         >         open I get
> >         >         > nothing even though there is no firewall running,
> >         and
> >         >         netstat reports
> >         >         > that it is listening on this port. What's
> >         happening? I
> >         >         briefly tried
> >         >         > FreeSwitch under exactly the same setup, and the
> >         server
> >         >         always
> >         >         > responded on this port. Is there something I'm
> >         missing?
> >         >         >
> >         >         > Regards,
> >         >         >
> >         >         > Matt
> >         >         >
> >         >
> >         >
> >         >         > _______________________________________________
> >         >         > Callweaver-users mailing list
> >         >         > [email protected]
> >         >         >
> >         >
> >         http://lists.callweaver.org/mailman/listinfo/callweaver-users
> >         >
> >         >         _______________________________________________
> >         >         Callweaver-users mailing list
> >         >         [email protected]
> >         >
> >         http://lists.callweaver.org/mailman/listinfo/callweaver-users
> >         >
> >         >
> >         > _______________________________________________
> >         > Callweaver-users mailing list
> >         > [email protected]
> >         >
> >         http://lists.callweaver.org/mailman/listinfo/callweaver-users
> >
> >         _______________________________________________
> >         Callweaver-users mailing list
> >         [email protected]
> >         http://lists.callweaver.org/mailman/listinfo/callweaver-users
> >
> >
> >
> >
> > _______________________________________________
> > Callweaver-users mailing list
> > [email protected]
> > http://lists.callweaver.org/mailman/listinfo/callweaver-users
>
> _______________________________________________
> Callweaver-users mailing list
> [email protected]
> http://lists.callweaver.org/mailman/listinfo/callweaver-users
>
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users

Reply via email to