I think he's referring to the PTP450. On Tue, Jan 10, 2017 at 4:27 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote:
> Sync injectors can do 48v since rev i? Been a while > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jan 10, 2017 4:24 PM, "Jesse via Cambium-users" < > cambium-users@wispa.org> wrote: > >> INPUT voltage says 30V DC and I just pulled the spec sheet and it takes >> the same power supply as the 900 SM like Ken said. [image: Web Bug from >> http://t.sidekickopen69.com/e1t/o/5/f18dQhb0S7ks8dDMPbW2n0x6l2B9gXrN7sKj6v4LGBMVd0Gfx4XXF10MQZqWqQFLCHW5YNdJW1k1H6H0?si=6220812130582528&pi=2fc74fd3-c3e9-42ca-cabb-a0a0ed863136] >> >> On Tue, Jan 10, 2017 at 4:21 PM, Ken Hohhof <khoh...@kwom.com> wrote: >> >>> This is a PTP, not PMP? So same HW as the 900 MHz SM? I don't think >>> that >>> will run on 48V, I think the max is 30. Although I have not used the PTP >>> version and could be mistaken. >>> >>> >>> -----Original Message----- >>> From: cambium-users-boun...@wispa.org >>> [mailto:cambium-users-boun...@wispa.org] On Behalf Of Nick Bright >>> Sent: Tuesday, January 10, 2017 3:08 PM >>> To: cambium-users@wispa.org >>> Subject: [Cambium-users] SyncInjector with PTP450i >>> >>> Greetings, >>> >>> I opened a ticket with PacketFlux but haven't received a response yet. >>> We had to leave the site in failure, unfortunately. >>> >>> At a customer location (contracting work for them, not my network) we >>> were >>> installing a 2nd PTP450i 900Mhz unit for the clients' building to >>> building >>> connections, and eventually there will be a third unit. >>> >>> To sync the network, we purchased a PacketFlux SyncInjector 10/100 >>> (without >>> sync pipe), using a 48v power supply purchased from PacketFlux. >>> >>> The PTP450i units use 802.3at power, but do also work on Cambium POE >>> (+30v >>> 7/8, -4/5). >>> >>> When connecting the PTP450i to the SyncInjector, the SyncInjector flashes >>> light codes that indicate "short or overload". >>> >>> I attempted to adjust the 4/5,7/8 to +/-,+/- matching the '450 >>> documentation, but the same short/overload error was reported. >>> >>> Basically, every configuration results in "short or overload" error >>> reported. >>> >>> Thoughts on this? >>> >>> -- >>> ----------------------------------------------- >>> - Nick Bright - >>> - Vice President of Technology - >>> - Valnet -=- We Connect You -=- - >>> - Tel 888-332-1616 x 315 <(888)%20332-1616> / Fax 620-331-0789 >>> <(620)%20331-0789> - >>> - Web http://www.valnet.net/ - >>> ----------------------------------------------- >>> - Are your files safe? - >>> - Valnet Vault - Secure Cloud Backup - >>> - More information & 30 day free trial at - >>> - http://www.valnet.net/services/valnet-vault - >>> ----------------------------------------------- >>> >>> This email message and any attachments are intended solely for the use of >>> the addressees hereof. This message and any attachments may contain >>> information that is confidential, privileged and exempt from disclosure >>> under applicable law. If you are not the intended recipient of this >>> message, >>> you are prohibited from reading, disclosing, reproducing, distributing, >>> disseminating or otherwise using this transmission. If you have received >>> this message in error, please promptly notify the sender by reply E-mail >>> and >>> immediately delete this message from your system. >>> >>> _______________________________________________ >>> Cambium-users mailing list >>> Cambium-users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/cambium-users >>> >>> >>> _______________________________________________ >>> Cambium-users mailing list >>> Cambium-users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/cambium-users >>> >> >> >> >> -- >> >> Jesse Suchanek >> >> DoubleRadius >> >> Account Manager >> >> 704-927-6091 <(704)%20927-6091> >> >> jes...@doubleradius.com >> >> www.doubleradius.com >> >> >> >> >> >> >> >> >> _______________________________________________ >> Cambium-users mailing list >> Cambium-users@wispa.org >> http://lists.wispa.org/mailman/listinfo/cambium-users >> >> > _______________________________________________ > Cambium-users mailing list > Cambium-users@wispa.org > http://lists.wispa.org/mailman/listinfo/cambium-users > >
_______________________________________________ Cambium-users mailing list Cambium-users@wispa.org http://lists.wispa.org/mailman/listinfo/cambium-users