Yeah. Like I said, the PTP230 began this insanity. We kept asking Motorola for the ability to buy license keys to turn PMP430 SMs into PTP230's. Then finally one Animal Farm we got the answer. The PTP230 is different than a PMP430 SM (added sync over power and maybe something else, maybe more RAM, I forget).
Now we have PTP450, which is just SM hardware. No h/w variant was produced that included sync over power. Then we got PTP450i, which as I said in 5GHz is the same as AP h/w. But then along came 900MHz PTP450 (they call it PTP450i, but in reality it's PTP450) which is just SM h/w, and 29.5VDC classic Canopy passive POE. I'm not saying it's good or bad, but it sure is confusing. Lacking sync over power leans towards bad though. But again, I'm petty sure you can use a UGPS, SyncPipe, SyncBox, whatever with it. On 1/10/2017 4:56 PM, Ken Hohhof wrote: > Yes, but 900 MHz 450i PMP is an oddball, the SM uses 24V POE to make it > easier to upgrade customers from 900 MHz FSK. > > And the 900 MHz PTP version is based on the SM hardware. > > > -----Original Message----- > From: cambium-users-boun...@wispa.org > [mailto:cambium-users-boun...@wispa.org] On Behalf Of Nick Bright > Sent: Tuesday, January 10, 2017 4:45 PM > To: cambium-users@wispa.org > Subject: Re: [Cambium-users] SyncInjector with PTP450i > > On 1/10/2017 3:28 PM, George Skorup wrote: >> The 900MHz PTP450 is *SM* hardware, 30VDC max! Not 48-56VDC. Not >> 802.3at compliant. > Careful. PTP450 or PTP450i? I'm given to understand the letter "i" is very > important in this equation. > > Based on the responses to this post, I'm relatively certain this is the > case. > > -- > ----------------------------------------------- > - Nick Bright - > - Vice President of Technology - > - Valnet -=- We Connect You -=- - > - Tel 888-332-1616 x 315 / Fax 620-331-0789 - > - Web http://www.valnet.net/ - > ----------------------------------------------- > - Are your files safe? - > - Valnet Vault - Secure Cloud Backup - > - More information & 30 day free trial at - > - http://www.valnet.net/services/valnet-vault - > ----------------------------------------------- > > This email message and any attachments are intended solely for the use of > the addressees hereof. This message and any attachments may contain > information that is confidential, privileged and exempt from disclosure > under applicable law. If you are not the intended recipient of this message, > you are prohibited from reading, disclosing, reproducing, distributing, > disseminating or otherwise using this transmission. If you have received > this message in error, please promptly notify the sender by reply E-mail and > immediately delete this message from your system. > > _______________________________________________ > Cambium-users mailing list > Cambium-users@wispa.org > http://lists.wispa.org/mailman/listinfo/cambium-users > > > _______________________________________________ > Cambium-users mailing list > Cambium-users@wispa.org > http://lists.wispa.org/mailman/listinfo/cambium-users _______________________________________________ Cambium-users mailing list Cambium-users@wispa.org http://lists.wispa.org/mailman/listinfo/cambium-users
