Hi Andrea, cc-ing maillist, since I don't think you're the only one to do
(or want to do) this,

What you are suggesting is absolutely technically possible, though (as much
as I dislike simulink), I'd think really hard before going through with it.
Note also, if you don't use the toolflow, you become completely responsible
for managing the FPGA's memory-mapped devices, and will have to manually
build a boffile if you want to use the katcp/borphserver programming
environment. That said, others may already have done all the legwork for
you.

Anyway, with that cautionary note....

The VHDL (or verilog) for the various CASPER blocks is available as part of
the various pcores of the roach2 base package --
https://github.com/casper-astro/mlib_devel/tree/master/xps_base/XPS_ROACH2_base/pcores
.

The instantiation of these interface blocks is performed by the toolflow at
compile time, which generates a Xilinx EDK spec system.mhs top level file.
If you want to find out how to instantiate these blocks yourself, using the
toolflow as a guide, here is where you climb into the CASPER rabbit hole.

There is an EDK template for a compile in the base package: for ROACH2 --
https://github.com/casper-astro/mlib_devel/blob/master/xps_base/XPS_ROACH2_base/system.mhs
.
In theory, if you strip out the #IF#s in this file, you'll have a top-level
model description you can add stuff to -- but it still won't be in VHDL,
even if the instantiated modules are. Constraints are in
https://github.com/casper-astro/mlib_devel/blob/master/xps_base/XPS_ROACH2_base/data/system.ucf

The toolflow adds to this template in a variety of ways --
* individual yellow blocks can add code via the MATLAB object-oriented
infrastructure via the gen_mhs_ip and gen_ucf methods of the xps class --
eg.
https://github.com/casper-astro/mlib_devel/tree/master/xps_library/%40xps_adc5g
* or via an overridden gen_mhs_ip or gen_ucf -- eg.
https://github.com/casper-astro/mlib_devel/blob/master/xps_library/%40xps_bram/gen_mhs_ip.m
* or via all the #IF# statements in the base package system.mhs/system.ucf

If (#IF#?) you want to dig through the matlab block classes, and system.mhs
looking for what a particular yellow block *does* when it is instantiated,
you probably could. But it will still be an EDK file, not vhdl.
You could also fire up simulink, compile a design with appropriate yellow
blocks in and then grab the system.mhs it generates and use that as a
template.
You could also look in an old ROACH2 testing repository where firmware was
tested prior to being casperized --
https://github.com/ska-sa/roach2_test_gateware/blob/master/modules/toplevel/hdl/toplevel.v
which
is all VHDL/Verilog, but probably doesn't have all the modules you need.

You might find the yellow block casper tutorial is useful in figuring out
where various aspects of the interface code is instantiated.

As a final note -- the latest version of the Vivado-based CASPER toolflow
(aka, JASPER), includes (thanks, Adam & Wes in SA!) the ability to generate
an ISE-spec project (i.e., a ucf file and a top level verilog file) from a
simulink model. I don't know which yellow blocks are currently supported
for ROACH2, but if the ones you need work, this is probably the easiest
route to generating a template ISE project. If this is the way you want to
go, we should talk more somewhere. But you should be aware that you'll be
placing yourself on the bleeding edge, where things are, well, bloody.

Cheers,

Jack

On Tue, 21 Jun 2016 at 06:06 Andrea Melis <[email protected]> wrote:

> Hi Jack,
>
> how are you doing?
>
> I would ask you a question, I am interested in developing projects fully
> in VHDL into the ROACH2 (equipped with ADC 5GS and mezzanine cards SFP+),
> is available the VHDL code for the various blocks of the CASPER library? Is
> the code generated after the compiling?
>
> In particular I would need a “template” VHDL containing especially the I/O
> parts like the ADCs and the 10 Gbe outputs blocks, in order to have a VHDL
> skeleton as a starting point for whatever digital signal processing on-chip.
>
> Please let me know whether it already exists or whether it can be
> technically done, I thank you in advance
>
> Cheers
>
>
> Andrea
>

Reply via email to