Hi all,

I got a ADC 5G V2.0 DMUX1:1 and I decided to evaluate its performance. As
expected the results are poor and its phase needs to be calibrated. I read
the document in here
http://www.worldscientific.com/doi/pdf/10.1142/S2251171714500019  and I got
code from here  https://github.com/sma-wideband/adc_tests I adapted the
CASPER design to match my hardware and I also adapted the calibration
routines.

The result is always the same: while setting the ADC in test mode, channels *a,
b, c* report 0 glitches while the channel *d* reports about ~2000 out of
the 16384 samples each time. I sweep the phase using the c
*alibrate_mmcm_phase()* function but I never got to reduce the number of
glitches.So the optimal phase does not exist, hence it cannot be
calibrated.

I am attaching two histograms for ADC_fs=2,5GHz and a signal of input power
fo -10 dBm and 1 MHz and 800 MHz respectively. As you can see,* a,b,c*
channels are withing a reasonable margin while channel *d *gets out of
control.

Has anyone find a problem like that before? How have you solved? Is there
more available documentation for that part ?

Thank you,

XB

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to