Hey Mitch. Thank you for the reply.
The Python version that my system is returning is 3.7.13. Should I rather use Python 3.8? I have noticed that matlab2021a does not support python3.9. Thank you --------------------------------------------------------- Heystek Grobler 0832721009 heystekgrob...@gmail.com > On 14 Nov 2023, at 18:23, Mitchell Burnett <mitch.c.burn...@gmail.com> wrote: > > Hi Haystek, > > This most likely is a python version conflict. When you activate your Python > environment, what is the version of Python that `python -V` returns? For me, > my casper dev env returns Python 3.8.2. > > The second tutorial incorporates the RFDC yellow block. When the back end > tool encounters this block there is additional code that is triggered to > support the software defined capabilities of the RFDC in the on-chip > processor. This is why running the first tutorial this may go unnoticed but > encountered when building subsequent models for RFSoC. > > Hope this helps, > Mitch > >> On Nov 14, 2023, at 6:21 AM, Heystek Grobler <heystekgrob...@gmail.com >> <mailto:heystekgrob...@gmail.com>> wrote: >> >> Good day everyone. >> >> I have some good news. >> >> I have gotten the first tutorial from the RFSoC ZCU111 to compile on both of >> my machines without any issues. Thank you everyone for all the help! I >> really appreciate it! >> >> I have tried to compile the second tutorial and I get the same error message >> on both of my machines. The screenshot is attached below. >> >> <Screenshot 2023-11-14 at 15.13.56.png> >> I have no idea why the first tutorial compiles but the second one doesn't. >> >> Does anyone have an idea what might be going on? >> >> Thank you so much for the help. >> >> Heystek >> >> --------------------------------------------------------- >> Heystek Grobler >> >> 0832721009 >> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >> >> >> On Wed, Nov 1, 2023 at 7:39 PM Mitch Burnett <mitch.burn...@byu.edu >> <mailto:mitch.burn...@byu.edu>> wrote: >>> Hi Heystek, >>> >>> I think it better if you used 20.04. Is the first machine (18.04) the one >>> that crashes and that when you have had Matlab working that comes from your >>> second machine (20.04)? >>> >>> I just did some tests and was able to reproduce your issue with generating >>> the dtbo. In your xilinx device tree repo, checkout the `xlnx_rel_v2021.1` >>> branch. This is not in the "Getting Started with RFSoC” guide, and now >>> needs to be. We will need to make sure to get this change documented. >>> >>> Additionally, I also now realize that mlib_devel `m2021a` branch will not >>> work with the most recent tutorials that were recently updated for new >>> changes that fixes a slew of issues with the rfdc yellow block. This is >>> because those changes are in the `m2021a-dev` branch of mlib_devel and yet >>> to be merged into `m2021a`. Hopefully we can do that soon. But, for now, >>> please be sure to also checkout the `m2021a-dev` branch of your mlib_devel >>> repo before moving into the subsequent tutorials that use the rfdc (the adc >>> interface and spectrometer tutorials). >>> >>> Best, >>> Mitch >>> >>>> On Nov 1, 2023, at 4:33 AM, Heystek Grobler <heystekgrob...@gmail.com >>>> <mailto:heystekgrob...@gmail.com>> wrote: >>>> >>>> >>>> Hey Mitch and everyone. >>>> >>>> Thank you so much for the help! I really appreciate it! >>>> >>>> I am trying to set up the toolflow on two machines. >>>> >>>> The first machine is: >>>> Ubuntu 18.04 LTS >>>> Vitis/Vivado 2021.1 >>>> >>>> The second machine: >>>> Ubuntu 20.04 LTS >>>> Vitis/Vivado 2021.1 >>>> >>>> I am currently busy with the setup on the first machine (Ubuntu 18.04) >>>> since the second machine is having issues regarding the university >>>> firewall. If needed I can update the first machine to Ubuntu 20.04. >>>> >>>> I downloaded the Xilinx device tree repo by making use of (I assume it is >>>> the current master branch commit1a5881d >>>> <https://github.com/Xilinx/device-tree-xlnx/commit/1a5881d00406fa4f68eee63064799b8e5b28a41a>): >>>> git clone https://github.com/xilinx/device-tree-xlnx.git >>>> >>>> Below are screenshots of the Matlab crash at startup: >>>> >>>> <Screenshot 2023-11-01 at 12.31.04.png> >>>> >>>> Here is the log file: >>>> >>>> <Screenshot 2023-11-01 at 12.31.35.png> >>>> >>>> <Screenshot 2023-11-01 at 12.31.42.png> >>>> >>>> Thank you for all the help! >>>> >>>> Heystek >>>> >>>> >>>> --------------------------------------------------------- >>>> Heystek Grobler >>>> >>>> 0832721009 >>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>> >>>> On Tuesday, Oct 31, 2023 at 10:30 PM, Mitchell Burnett >>>> <mitch.c.burn...@gmail.com <mailto:mitch.c.burn...@gmail.com>> wrote: >>>> Heystek, >>>> >>>> Matlab crashing: You had said earlier that you were on Ubuntu 20.04? Is >>>> this still the case? >>>> >>>> Toolflow error: Can you send me the commit hash for your current head of >>>> the Xilinx device tree repo? >>>> >>>> Mitch >>>> >>>>> On Oct 31, 2023, at 1:52 PM, Heystek Grobler <heystekgrob...@gmail.com >>>>> <mailto:heystekgrob...@gmail.com>> wrote: >>>>> >>>>> >>>>> Hey Kaj, Mitch, Morag and everyone. >>>>> >>>>> Thank you for the help! I really appreciate it. >>>>> >>>>> I have changed my startsg.local file and it fits in with your >>>>> suggestions. I get new errors now. The first one is Matlab sometimes >>>>> crashes at startup with: Abnormal termination: Segmentation violation >>>>> >>>>> <Screenshot 2023-10-31 at 21.19.34.png> >>>>> >>>>> When Matlab decided to work again, and I compiled the first tutorial, >>>>> then I got this error: “hsi::generate_target -dir $jdts_dir" >>>>> >>>>> <Screenshot 2023-10-31 at 20.52.47.png> >>>>> >>>>> <Screenshot 2023-10-31 at 20.52.56.png> >>>>> >>>>> Has anyone stumbled onto these problems? >>>>> >>>>> Thank you for the help. >>>>> >>>>> Heystek >>>>> >>>>> --------------------------------------------------------- >>>>> Heystek Grobler >>>>> >>>>> 0832721009 >>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>> >>>>> On Tuesday, Oct 31, 2023 at 9:23 AM, Morag Brown <mbr...@sarao.ac.za >>>>> <mailto:mbr...@sarao.ac.za>> wrote: >>>>> Hi Heystek, Mitch, all, >>>>> >>>>> The System Generator hanging issue occasionally still happens to me too >>>>> (but very rarely). However, it happened to me with every compile at one >>>>> time when I had a version of MATLAB installed that had many other >>>>> toolboxes installed. >>>>> >>>>> There is a note here >>>>> <https://casper-toolflow.readthedocs.io/en/latest/src/How-to-install-Matlab.html#current-vivado-flow-how-to-install-r2021a> >>>>> under step 5 of "How to install MATLAB" in the CASPER ReadTheDocs >>>>> instructions that says toolbox clashes have been tentatively accepted as >>>>> the cause for this problem. There is also a link to a Xilinx AMD blog >>>>> post where if you click on "more answers" at the bottom, you will see a >>>>> list of MATLAB toolboxes that someone else determined as being compatible >>>>> with System Generator. >>>>> >>>>> If your SysGen hanging issue happens with every compile, then check your >>>>> MATLAB toolboxes against this list and uninstall any not listed. Or if >>>>> you don't need any specific toolboxes, then just ensure that you have >>>>> only the ones required by the CASPER tools installed (i.e. the ones Mitch >>>>> has listed, that are also listed in the link I have provided above). >>>>> >>>>> I've not encountered the "std::exception error", but that's only because >>>>> I'm still using 18.04 and not 20.04 - the guide that Mitch has pointed >>>>> you to in the Xilinx AMD docs should hopefully fix that. >>>>> >>>>> One last thing - in order to be mindful of any one person's inbox, I'd >>>>> recommend that you send your replies on a thread to the mailing list >>>>> rather than a specific person. This way anyone else who has encountered >>>>> these issues may provide guidance, and anyone who might encounter these >>>>> issues in the future will be able to find the thread in the mailing list >>>>> archive. >>>>> >>>>> Morag >>>>> >>>>> On Tue, 31 Oct 2023, 07:17 Mitch Burnett, <mitch.burn...@byu.edu >>>>> <mailto:mitch.burn...@byu.edu>> wrote: >>>>>> Hi Heystek, >>>>>> >>>>>> One thing first, then the hang issue. From your screenshot of your >>>>>> startsg.local I notice that you need to add an additional env variable >>>>>> to the Xilinx device tree repo, and that you need to change the back end >>>>>> env variable form vivado to Vitis. Please compare your startsg.local >>>>>> file to the one shown in Getting Started With RFSoC >>>>>> <https://github.com/casper-astro/tutorials_devel/blob/main/docs/tutorials/rfsoc/tut_getting_started.md#toolflow-setup> >>>>>> tutorial. >>>>>> >>>>>> Now your remaining issue… Unfortunately, System Generator hanging like >>>>>> this is a known issue but I am not aware of if we know of the cause. I >>>>>> believe the best known explanation for this this that is a race >>>>>> condition between System Generator and Simulink where the return from >>>>>> System Generator is not received by the main Simulink process and >>>>>> results in the hang. This phenomena occasionally happens to me, but >>>>>> seldomly. >>>>>> >>>>>> However, here is more info for you that if you have not done the >>>>>> following during your setup this may be something else you want to pay >>>>>> attention to. At one time folks at SARAO had reported that with every >>>>>> attempted build this issue would occur. I recall that we determined the >>>>>> issue was a mix of a few things: 1) before installing Vitis/Model >>>>>> Composer the symbolic links in the the Xilinx Model Composer >>>>>> installation guide >>>>>> <https://docs.xilinx.com/r/2021.2-English/ug1483-model-composer-sys-gen-user-guide/Supported-MATLAB-Versions-and-Operating-Systems> >>>>>> needed to be completed. The instructions mention either installing gcc6 >>>>>> or creating the symbolic links mentioned in that previous link. I have >>>>>> only ever done the symbolic link approach. Mugundhan recently reported >>>>>> here that this seemed to remove the "std::exception error" when starting >>>>>> system generator. 2) In addition to this gcc nuance, this didn’t seem to >>>>>> be enough and we found (through anecdotal evidence) that the hanging was >>>>>> also related to additional matlab add-on toolboxes that were installed >>>>>> but not required. Because of this, it is recommended to only install the >>>>>> following toolboxes when installing matlab: Simulink, Communications >>>>>> toolbox, DSP System toolbox, Fixed-Point Designer toolbox, Signal >>>>>> Processing toolbox. I want to recall that it was the Matlab or Simulink >>>>>> SDK toolbox that when installed interfere with the operation of Matlab. >>>>>> >>>>>> Dealing with this hanging issue is heuristic. I am not aware of a full >>>>>> solution. >>>>>> >>>>>> Even with all this, when this happens to me (again seldom… but does >>>>>> happen) I click the “cancel” button that appears on the bottom of the >>>>>> model window (the window where the model canvas containing the blocks >>>>>> are placed — there is a status bar for the model generation status and >>>>>> the cancel button is next to that) then I spam ctrl-c inside the >>>>>> terminal where I ran `./startsg starts.local`. This will usually trigger >>>>>> the interrupt caught by System Generator and closes the System Generator >>>>>> Compilation status with control returning back to Matlab (I have access >>>>>> to the command prompt that now reports a nonsensical error) and I can >>>>>> then rerun `jasper`. I can think of a handful of times where the >>>>>> interrupt is not caught and just have to close Matlab entirely and start >>>>>> fresh (I have never lost a model file or saved progress when this >>>>>> happens). >>>>>> >>>>>> Best, >>>>>> Mitch >>>>>> >>>>>>> On Oct 30, 2023, at 3:03 AM, Heystek Grobler <heystekgrob...@gmail.com >>>>>>> <mailto:heystekgrob...@gmail.com>> wrote: >>>>>>> >>>>>>> Hey Mitch. >>>>>>> >>>>>>> Thank you for the reply. >>>>>>> >>>>>>> I have installed everything in the virtual environment. The tutorial1 >>>>>>> is now running for 14 hours without being completed. Below are >>>>>>> screenshots of my setup files: >>>>>>> >>>>>>> <Screenshot 2023-10-30 at 10.54.07.png> >>>>>>> >>>>>>> <Screenshot 2023-10-30 at 10.50.09.png> >>>>>>> >>>>>>> <Screenshot 2023-10-30 at 10.50.31.png> >>>>>>> >>>>>>> I have followed the steps but I can't seem to get the error message >>>>>>> "caught std: exception" to disappear. >>>>>>> >>>>>>> <Screenshot 2023-10-30 at 11.03.32.png> >>>>>>> >>>>>>> Is there anything else that I can try? >>>>>>> >>>>>>> Thank you for the help! >>>>>>> >>>>>>> Heystek >>>>>>> >>>>>>> >>>>>>> --------------------------------------------------------- >>>>>>> Heystek Grobler >>>>>>> >>>>>>> 0832721009 >>>>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>>>> >>>>>>> >>>>>>> On Mon, Oct 30, 2023 at 4:50 AM Mitch Burnett <mitch.burn...@byu.edu >>>>>>> <mailto:mitch.burn...@byu.edu>> wrote: >>>>>>>> Hi Heystek, >>>>>>>> >>>>>>>> This issue is most likely caused in a discrepancy between the python >>>>>>>> environment you setup for mlib_devel and one that matlab/simulink is >>>>>>>> using. Can you verify that when you start matlab that your python >>>>>>>> environment is active, or that your startsg.local configuration file >>>>>>>> sets the python environment correctly? Additionally, can you confirm >>>>>>>> that when setting up your python environment it is using python3 and >>>>>>>> that after you cloned mlib_devel that you also installed all >>>>>>>> dependencies into that environment (i.e., In your clone of mlib_devel >>>>>>>> that you ran `pip install -r requirements.txt`)? >>>>>>>> >>>>>>>> Hope this helps, >>>>>>>> >>>>>>>> Mitch >>>>>>>> >>>>>>>>> On Oct 28, 2023, at 9:11 AM, Heystek Grobler >>>>>>>>> <heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com>> wrote: >>>>>>>>> >>>>>>>>> Good day Mitch and Kaj. >>>>>>>>> >>>>>>>>> I hope that you guys are still doing well. >>>>>>>>> >>>>>>>>> Thank you so much for the help. I really appreciate it. >>>>>>>>> >>>>>>>>> I have made some good headway by following the instructions that you >>>>>>>>> have sent me. I stumbled upon a new error by compiling the first >>>>>>>>> tutorial. I received the error: ModuleNotFoundError: No module named >>>>>>>>> ‘odict' >>>>>>>>> >>>>>>>>> I have installed odict in python but I still get this error. I have >>>>>>>>> attached a screenshot as well. Has anyone encountered this error? >>>>>>>>> >>>>>>>>> <PastedGraphic-1.png> >>>>>>>>> >>>>>>>>> Thank you for all of the help! >>>>>>>>> >>>>>>>>> Heystek >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> --------------------------------------------------------- >>>>>>>>> Heystek Grobler >>>>>>>>> >>>>>>>>> 0832721009 >>>>>>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>>>>>> >>>>>>>>> >>>>>>>>>> On 25 Oct 2023, at 20:39, Mitch Burnett <mitch.burn...@byu.edu >>>>>>>>>> <mailto:mitch.burn...@byu.edu>> wrote: >>>>>>>>>> >>>>>>>>>> Sorry, I should be more helpful to specifically point out which of >>>>>>>>>> the issues in this list on the CASPER wiki link that you are running >>>>>>>>>> into. >>>>>>>>>> >>>>>>>>>> Morag had pointed you in the right direction. Your specific issue is >>>>>>>>>> that there is a conflict between a library in the Ubuntu >>>>>>>>>> installation and the same library used by Vivado but using its own >>>>>>>>>> copy, that also happens to be a different version. Morag’s >>>>>>>>>> explanation about how to handle this is the correct approach. It is >>>>>>>>>> also the approach detailed in the blog post on the casper wiki link >>>>>>>>>> I posted. The specific blog post in reference is this one: >>>>>>>>>> https://strath-sdr.github.io/tools/matlab/sysgen/vivado/linux/2021/01/28/sysgen-on-20-04.html >>>>>>>>>> >>>>>>>>>> Mitch >>>>>>>>>> >>>>>>>>>>> On Oct 25, 2023, at 12:34 PM, Mitch Burnett <mitch.burn...@byu.edu >>>>>>>>>>> <mailto:mitch.burn...@byu.edu>> wrote: >>>>>>>>>>> >>>>>>>>>>> Hi Heystek, >>>>>>>>>>> >>>>>>>>>>> The full set of instructions and how to overcome different issues >>>>>>>>>>> based on the version of Ubuntu is documented on the CASPER wiki for >>>>>>>>>>> installing the toolflow here: >>>>>>>>>>> https://casper-toolflow.readthedocs.io/en/latest/index.html#a-note-on-operating-systems >>>>>>>>>>> >>>>>>>>>>> This has the solutions to all the current known issues with running >>>>>>>>>>> the tools on these version of Ubuntu. >>>>>>>>>>> >>>>>>>>>>> From your screenshots, it also looks like you will need to >>>>>>>>>>> re-install the Xilinx suite of tools. In the installation GUI you >>>>>>>>>>> should select “Vitis”. This selection will install Vivado, Vitis, >>>>>>>>>>> and System Generator + Model Composer for Simulink. >>>>>>>>>>> >>>>>>>>>>> Sorry you are having these issues. >>>>>>>>>>> >>>>>>>>>>> Mitch >>>>>>>>>>> >>>>>>>>>>>> On Oct 25, 2023, at 12:30 PM, Kaj Wiik <kaj.w...@iki.fi >>>>>>>>>>>> <mailto:kaj.w...@iki.fi>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Hi Heystek, >>>>>>>>>>>> >>>>>>>>>>>> Indeed, it took me a while to remember this issue, please see my >>>>>>>>>>>> notes: >>>>>>>>>>>> https://gitlab.utu.fi/kjwiik/casper-installation#matlab-errors >>>>>>>>>>>> >>>>>>>>>>>> Also, I think you did not install Vitis, when asked in >>>>>>>>>>>> installation, you should select to install Vitis, not Vivado >>>>>>>>>>>> (Vitis selection also installs Vivado). >>>>>>>>>>>> Unfortunately, I think you have to reinstall because at least I do >>>>>>>>>>>> not know how to add Vitis to Vivado install. >>>>>>>>>>>> >>>>>>>>>>>> I hope this helps, >>>>>>>>>>>> Kaj >>>>>>>>>>>> >>>>>>>>>>>> On Wed, 25 Oct 2023 at 21:23, Heystek Grobler >>>>>>>>>>>> <heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com>> wrote: >>>>>>>>>>>>> Hey Morag and everyone. >>>>>>>>>>>>> >>>>>>>>>>>>> I have installed kde-full and I am still getting the same issues >>>>>>>>>>>>> and errors. Below are screenshots: >>>>>>>>>>>>> >>>>>>>>>>>>> <Screenshot 2023-10-25 at 20.05.57.png> >>>>>>>>>>>>> >>>>>>>>>>>>> <Screenshot 2023-10-25 at 20.07.57.png> >>>>>>>>>>>>> >>>>>>>>>>>>> <Screenshot 2023-10-25 at 20.08.08.png> >>>>>>>>>>>>> >>>>>>>>>>>>> I searched through the mail list. In the list Kaj Wiik >>>>>>>>>>>>> encountered the same problem, but I can not find the solution. >>>>>>>>>>>>> >>>>>>>>>>>>> @Kaj did you perhaps manage to find a way for the toolchain to >>>>>>>>>>>>> work? In the email list you and Mitch Burnett talked about >>>>>>>>>>>>> posting a recipe somewhere for this. >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you for the help. >>>>>>>>>>>>> >>>>>>>>>>>>> Heystek >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>> >>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> On 16 Oct 2023, at 15:47, Morag Brown <mbr...@sarao.ac.za >>>>>>>>>>>>>> <mailto:mbr...@sarao.ac.za>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Heystek, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Can't remember for sure, but I think that "MATLABWindow >>>>>>>>>>>>>> application failed to launch" issue has been fixed in the past >>>>>>>>>>>>>> by installing the kde-full package. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Otherwise I think the issue in red above is a library clashing >>>>>>>>>>>>>> issue - I gather the end of that error message says something >>>>>>>>>>>>>> about an undefined symbol, which would be because libhogweed >>>>>>>>>>>>>> expects a different version of the library it depends on than >>>>>>>>>>>>>> what is actually being used. If you run the following in the >>>>>>>>>>>>>> MATLAB terminal: >>>>>>>>>>>>>> >>>>>>>>>>>>>> !ldd /lib/x86_64-linux-gnu/libhogweed.so >>>>>>>>>>>>>> <http://libhogweed.so/>.2 >>>>>>>>>>>>>> >>>>>>>>>>>>>> It might show you that it's using the libgmp version that comes >>>>>>>>>>>>>> with Model Composer/Vivado. If you move that out of the path >>>>>>>>>>>>>> (typically you can just make an "exclude" directory within the >>>>>>>>>>>>>> directory containing the MC/Vivado libraries and move the >>>>>>>>>>>>>> offending items into that, so you can recover them later should >>>>>>>>>>>>>> you need), it will then use the system version of the library, >>>>>>>>>>>>>> which will hopefully have what is needed. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I recall there being a few issues like this on the mailing list >>>>>>>>>>>>>> in the path, so searching the archives should hopefully provide >>>>>>>>>>>>>> more info if you need. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Morag >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Mon, Oct 16, 2023 at 1:21 PM Heystek Grobler >>>>>>>>>>>>>> <heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com>> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> Hey Jack, Dan and Francois. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thank you so much for the help and guidance, I really >>>>>>>>>>>>>>> appreciate it! >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> We reached out to the Xilinx University Program and received >>>>>>>>>>>>>>> the necessary licenses. Below is an image of the license >>>>>>>>>>>>>>> manager. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <Screenshot from 2023-10-16 13-13-19.png> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <Screenshot from 2023-10-16 13-13-40.png> >>>>>>>>>>>>>>> I have set up everything according to the getting started page >>>>>>>>>>>>>>> but I ran into the following errors when trying to open >>>>>>>>>>>>>>> Simulink. Has anyone encountered something like this? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <Screenshot from 2023-10-16 13-16-10.png> >>>>>>>>>>>>>>> Thank you so much for the help! >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thu, Oct 5, 2023 at 11:09 PM Francois Kapp >>>>>>>>>>>>>>> <francois.k...@gmail.com <mailto:francois.k...@gmail.com>> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> Also look into whether your institution is registered under >>>>>>>>>>>>>>>> the Xilinx University Program - if so, Xilinx are generally >>>>>>>>>>>>>>>> amenable to donating licenses. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>> Francois >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thu, Oct 5, 2023 at 3:13 AM Jack Hickish >>>>>>>>>>>>>>>> <jackhick...@gmail.com <mailto:jackhick...@gmail.com>> wrote: >>>>>>>>>>>>>>>>> I _think_ that's all you need. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> FYI - you can probably get a 30 day trial (or 90 in the case >>>>>>>>>>>>>>>>> of sysgen) license for free, which should save you waiting >>>>>>>>>>>>>>>>> for XUP. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Cheers >>>>>>>>>>>>>>>>> Jack >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thu, 5 Oct 2023 at 11:03, Heystek Grobler >>>>>>>>>>>>>>>>> <heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com>> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> Hey Jack and Kaj. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thank you so much for the help and guidance. So the license >>>>>>>>>>>>>>>>>> I got with the RFSoC ZSU111 does not contain the Xilinx ML >>>>>>>>>>>>>>>>>> Enterprise Edition and it also does not contain SysGen. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> My University (The University of Pretoria) is reaching out >>>>>>>>>>>>>>>>>> to Xilinx to buy the appropriate licence. Will it suffice if >>>>>>>>>>>>>>>>>> the University gets the Xilinx ML Enterprise Edition and >>>>>>>>>>>>>>>>>> SysGen or should something else be added to it? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thank you for the help! >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Sun, Oct 1, 2023 at 6:09 PM Jack Hickish >>>>>>>>>>>>>>>>>> <jackhick...@gmail.com <mailto:jackhick...@gmail.com>> wrote: >>>>>>>>>>>>>>>>>>> I would suggest trying to get the new license. I'm suspect >>>>>>>>>>>>>>>>>>> that Vivado 2020 supports the RFSoC chips you want (though >>>>>>>>>>>>>>>>>>> I haven't checked) but using an older version than the >>>>>>>>>>>>>>>>>>> toolflow suggests will almost certainly lead to other >>>>>>>>>>>>>>>>>>> issues. Swimming against the CASPER version-tide is never a >>>>>>>>>>>>>>>>>>> particularly fun thing to do :) >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Sun, 1 Oct 2023 at 13:22, Heystek Grobler >>>>>>>>>>>>>>>>>>> <heystekgrob...@gmail.com >>>>>>>>>>>>>>>>>>> <mailto:heystekgrob...@gmail.com>> wrote: >>>>>>>>>>>>>>>>>>>> Hey Jack. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Should I then try to get a SysGen/ModelComposer license >>>>>>>>>>>>>>>>>>>> for 2021.1 or is there a way to still use Vivado 2020.06 >>>>>>>>>>>>>>>>>>>> with the RFSoC? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thank you for the help! >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>>>> heystekgrob...@gmail.com <mailto:heystekgrob...@gmail.com> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On 01 Oct 2023, at 14:12, Jack Hickish >>>>>>>>>>>>>>>>>>>>> <jackhick...@gmail.com <mailto:jackhick...@gmail.com>> >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Not quite sure what to make of this, but I don't see >>>>>>>>>>>>>>>>>>>>> anything for SysGen / ModelComposer newer than 2020.06, >>>>>>>>>>>>>>>>>>>>> which wouldn't be valid with Vivado 2021.1 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Sun, 1 Oct 2023 at 12:47, Heystek Grobler >>>>>>>>>>>>>>>>>>>>> <heystekgrob...@gmail.com >>>>>>>>>>>>>>>>>>>>> <mailto:heystekgrob...@gmail.com>> wrote: >>>>>>>>>>>>>>>>>>>>>> Hey Jack. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thank you so much for the email. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I have included screenshots of the licence manager below: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 13.42.31.png> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 13.42.52.png> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 13.43.15.png> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Do I need another/different licence from Xilinx or is >>>>>>>>>>>>>>>>>>>>>> there a way around this? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thank you for the help. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>>>>>> heystekgrob...@gmail.com >>>>>>>>>>>>>>>>>>>>>> <mailto:heystekgrob...@gmail.com> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Sun, Oct 1, 2023 at 1:10 PM Jack Hickish >>>>>>>>>>>>>>>>>>>>>> <jackhick...@gmail.com <mailto:jackhick...@gmail.com>> >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> Hi Heystek, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> As the error in the diagnostic viewer suggests -- you >>>>>>>>>>>>>>>>>>>>>>> don't seem to have an appropriate sysgen license, in >>>>>>>>>>>>>>>>>>>>>>> either the default search paths (I think at least one >>>>>>>>>>>>>>>>>>>>>>> of these is ~/.Xilinx/Xilinx.lic) or specified with an >>>>>>>>>>>>>>>>>>>>>>> environment variable. Do you think you have a license >>>>>>>>>>>>>>>>>>>>>>> the system isn't finding or is it possible you just >>>>>>>>>>>>>>>>>>>>>>> need to get one from Xilinx? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Also, the "Could not find Vitis installation" at the >>>>>>>>>>>>>>>>>>>>>>> start of the MATLAB prompt is concerning, but I don't >>>>>>>>>>>>>>>>>>>>>>> think that's the current issue. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Cheers >>>>>>>>>>>>>>>>>>>>>>> Jack >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Sun, 1 Oct 2023 at 11:58, Heystek Grobler >>>>>>>>>>>>>>>>>>>>>>> <heystekgrob...@gmail.com >>>>>>>>>>>>>>>>>>>>>>> <mailto:heystekgrob...@gmail.com>> wrote: >>>>>>>>>>>>>>>>>>>>>>>> Good day everyone. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I hope that this email finds you well. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I am used to working with a ROACH2 and have now >>>>>>>>>>>>>>>>>>>>>>>> started with an RFSoC ZCU111. I followed the >>>>>>>>>>>>>>>>>>>>>>>> instructions on the CASPER Read The Docs Page and >>>>>>>>>>>>>>>>>>>>>>>> installed Ubuntu 20.04, Matlab 2021a and Vivado >>>>>>>>>>>>>>>>>>>>>>>> 2021.1. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> When I try to compile the first tutorial with jasper I >>>>>>>>>>>>>>>>>>>>>>>> get the following two errors (screenshots provided). >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 12.50.59.png> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 12.51.44.png> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Does anyone perhaps know how I can solve this? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Thank you for the help. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>>>>>>>> heystekgrob...@gmail.com >>>>>>>>>>>>>>>>>>>>>>>> <mailto:heystekgrob...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed >>>>>>>>>>>>>>>>>>>>>>>> to the Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTL3FSr%3DJuDgdckj_Euj12y9bo_CWw_KpE_fF9D6aEg%2BA%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTL3FSr%3DJuDgdckj_Euj12y9bo_CWw_KpE_fF9D6aEg%2BA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>>>> the Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnqnK_g%2Bk4hX_hj6qmgvkEOoGK%3D86XuzyCNSZ2XF6Hxsw%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnqnK_g%2Bk4hX_hj6qmgvkEOoGK%3D86XuzyCNSZ2XF6Hxsw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>>> the Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRRYiEXovrzdGhXvWNErGaeAM8NV%2BDGV93wktY5CM9Wog%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRRYiEXovrzdGhXvWNErGaeAM8NV%2BDGV93wktY5CM9Wog%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>> the Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmCU5KTgCcdXB3gJ1sGR8VZa_Rfm1LqkrpWYut2ZxqrdA%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmCU5KTgCcdXB3gJ1sGR8VZa_Rfm1LqkrpWYut2ZxqrdA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>> the Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/1FC87B36-086C-4120-B560-680A7BFBD778%40gmail.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/1FC87B36-086C-4120-B560-680A7BFBD778%40gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>>>> Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnNe3fRXyXFvs_%3DK8%3DuFrXeCOVCK72a9C0%3Dt%3D_fPyqKNw%40mail.gmail.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnNe3fRXyXFvs_%3DK8%3DuFrXeCOVCK72a9C0%3Dt%3D_fPyqKNw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>>> Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>> casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRfVeD6YQNkkMHB4iVQLBS6qJwKxiHGMWeK5iWw%3DaidUg%40mail.gmail.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRfVeD6YQNkkMHB4iVQLBS6qJwKxiHGMWeK5iWw%3DaidUg%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>> Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>>>> it, send an email to casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmA5vrxHqWd65kCjRRhzSzSq-f9zjKQt%2BRKvJ_e%2BPM02g%40mail.gmail.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmA5vrxHqWd65kCjRRhzSzSq-f9zjKQt%2BRKvJ_e%2BPM02g%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>> Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>>> it, send an email to casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAD0AO%3DEJjhE0090%3D1Q354igL6bONt_W0C_PFR6hbK%2BK%3DvbH43w%40mail.gmail.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAD0AO%3DEJjhE0090%3D1Q354igL6bONt_W0C_PFR6hbK%2BK%3DvbH43w%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>> it, send an email to casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DROMVp5u10euLzBKu0uvO%3DwpZvNhQTtD8RQc8PK4Hw17g%40mail.gmail.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DROMVp5u10euLzBKu0uvO%3DwpZvNhQTtD8RQc8PK4Hw17g%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Disclaimer >>>>>>>>>>>>>> >>>>>>>>>>>>>> The information contained in this communication from the sender >>>>>>>>>>>>>> is confidential. It is intended solely for use by the recipient >>>>>>>>>>>>>> and others authorized to receive it. If you are not the >>>>>>>>>>>>>> recipient, you are hereby notified that any disclosure, copying, >>>>>>>>>>>>>> distribution or taking action in relation of the contents of >>>>>>>>>>>>>> this information is strictly prohibited and may be unlawful. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "casper@lists.berkeley.edu >>>>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0TdScxXiv%2BorZXbm8MsE%3DBMehFjm3QoiW3GcA3z9d_LNsw%40mail.gmail.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0TdScxXiv%2BorZXbm8MsE%3DBMehFjm3QoiW3GcA3z9d_LNsw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>>> Groups "casper@lists.berkeley.edu >>>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>> send an email to casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADpJ3s2pbAs27Xva11y-Z0a5Vrv0v-RUQYvom1xz%3D8HwZWxw9A%40mail.gmail.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADpJ3s2pbAs27Xva11y-Z0a5Vrv0v-RUQYvom1xz%3D8HwZWxw9A%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>> Groups "casper@lists.berkeley.edu >>>>>>>>>>> <mailto:casper@lists.berkeley.edu>" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send an email to casper+unsubscr...@lists.berkeley.edu >>>>>>>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/786FF447-055D-4D93-A85E-AB8467AA9CE9%40byu.edu >>>>>>>>>>> >>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/786FF447-055D-4D93-A85E-AB8467AA9CE9%40byu.edu?utm_medium=email&utm_source=footer>. >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" >>>>>> group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to casper+unsubscr...@lists.berkeley.edu >>>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/49E12778-7E00-4755-9604-03264209E469%40byu.edu >>>>>> >>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/49E12778-7E00-4755-9604-03264209E469%40byu.edu?utm_medium=email&utm_source=footer>. >>>>> >>>>> >>>>> Disclaimer >>>>> >>>>> The information contained in this communication from the sender is >>>>> confidential. It is intended solely for use by the recipient and others >>>>> authorized to receive it. If you are not the recipient, you are hereby >>>>> notified that any disclosure, copying, distribution or taking action in >>>>> relation of the contents of this information is strictly prohibited and >>>>> may be unlawful. >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to casper+unsubscr...@lists.berkeley.edu >>>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/48453fdd-95e8-4cd2-b0a0-8f7f05c5f4b7%40Canary >>>>> >>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/48453fdd-95e8-4cd2-b0a0-8f7f05c5f4b7%40Canary?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to casper+unsubscr...@lists.berkeley.edu >>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>> To view this discussion on the web visit >>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CE0E4746-488C-4A18-B275-A48258D7F89C%40gmail.com >>>> >>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CE0E4746-488C-4A18-B275-A48258D7F89C%40gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to casper+unsubscr...@lists.berkeley.edu >>>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>>> To view this discussion on the web visit >>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/e915b4d9-b876-42d5-8b98-28e7266376b5%40Canary >>>> >>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/e915b4d9-b876-42d5-8b98-28e7266376b5%40Canary?utm_medium=email&utm_source=footer>. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to casper+unsubscr...@lists.berkeley.edu >>> <mailto:casper+unsubscr...@lists.berkeley.edu>. >>> To view this discussion on the web visit >>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/8FC75DB8-F48B-4B7B-82B1-9BE4B484DB5A%40byu.edu >>> >>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/8FC75DB8-F48B-4B7B-82B1-9BE4B484DB5A%40byu.edu?utm_medium=email&utm_source=footer>. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to casper+unsubscr...@lists.berkeley.edu >> <mailto:casper+unsubscr...@lists.berkeley.edu>. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTd5KhDhXDV9Rm5EC%2BEhJh9f3U_AvR5rvwXJn2UwaXjKw%40mail.gmail.com >> >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTd5KhDhXDV9Rm5EC%2BEhJh9f3U_AvR5rvwXJn2UwaXjKw%40mail.gmail.com?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu > <mailto:casper+unsubscr...@lists.berkeley.edu>. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/0D2F132B-8031-4425-B933-27AD1ECD4BCA%40gmail.com > > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/0D2F132B-8031-4425-B933-27AD1ECD4BCA%40gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/7FB1253F-571B-4AC7-A0B9-E1C4753777F9%40gmail.com.
smime.p7s
Description: S/MIME cryptographic signature