Yes, I live in Baton Rouge but Gratis lives in New Orleans I "acquired" her salvage after Katrina Want to keep your WHOLE PAYCHECK? PLEASE VISIT http://www.fairtax.org ----- Original Message ----- From: Jim Bernstorf To: [email protected] Sent: Sunday, August 31, 2008 4:09 PM Subject: RE: catalina27-talk: mast lights
I wondered.110lbs isn't that heavy unless it gets away from you and starts laying down uncontrolled. I take it you are on the gulf coast. That thing is looking pretty ugly from up here. ------------------------------------------------------------------------------ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Sailor Chef Sent: Sunday, August 31, 2008 3:53 PM To: [email protected] Subject: Re: catalina27-talk: mast lights I disagree, I've stepped too many masts, some much larger than a Cat 27, using, among other things, the spin halyard on the 40 footer down the dock, a gin pole, an A frame and just plain ol' muscle power. After Katrina, we used a tree to un step a 30 footer's mast in the middle of the street and muscle power to un step a Cat 27 mast in the middle of the harbor while the boat was impaled on a piling. Yes, it is heavy, just use caution. A crane is the best way to go dependant on conditions and money but not necessary Mark, Gratis (6115), NOLA P.S. I've got Gratis in a 70 foot slip with double lines and the rig is down, I hope she's still there day after tomorrow! Want to keep your WHOLE PAYCHECK? PLEASE VISIT http://www.fairtax.org ----- Original Message ----- From: [EMAIL PROTECTED] To: [email protected] Sent: Sunday, August 31, 2008 3:16 PM Subject: Re: catalina27-talk: mast lights P.S., yes, the mast MUST be handled by a crane. Trying to move the mast around any other way is dangerous. It's heavy. Art Herrick ----- Original Message ----- From: Jim Bernstorf Date: Sunday, August 31, 2008 1:43 pm Subject: catalina27-talk: mast lights To: [email protected] > All this talk about hauling oneself up to the top of the mast > inspired me to > change out my non-working mast light that is mounted at the area > of the > spreaders. My extension ladder worked just fine to mount the > new light. I > discovered that the old light had dropped one of the wires and > when I pulled > out the slide for the port side halyard, I discovered that the > wire was worn > through down there. I dropped a new wire down the mast and > spliced it there > but the light still doesn't work. I'm fairly confident that > things are OK > inside the boat since I recently installed a new panel. That > makes me think > that it is probably a problem at the deck top in the mast. > Having had > several trailerable boats I am used to seeing masts that have > hinges or > bolts or something to pivot them into place when stepping them > and the > wiring connections that must be made at that time. My mast has > nothing like > that and appears to just sit on a plate. I am assuming that > there are > splices of the mast wires to the boat wires in the bottom of the mast. > Until I noticed that there is not apparent pivot point, I > thought that I > could just tip the mast back about 30 degrees to access those > wire splices. > My slip neighbor also has a C27TR and he told me that these > boats take a > crane to set the mast. I assumed that he was referring to the > weight: now > I'm wondering if that refers to how it is mounted as well. > > > > Is it possible to tip the mast back or does it get set straight > down on the > plate with a crane or something. If it can't tip, that means I > can't finish > this repair without hiring help which I hate to do!! > > > > Jim > > > > Jim Bernstorf > > Jules Distribution > > 6025 Cloverland Drive > > Brentwood, TN 37027 > > 615.833.1848 > > > > ---------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.6.13/1642 - Release Date: 8/29/2008 6:12 PM ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.6.13/1642 - Release Date: 8/29/2008 6:12 PM
