Yes to all   your questions  Zenpaks at both ends  right cable being used   
distance is  3ft so definitely not a problem No need for  attenuators 

> Date: Fri, 18 Apr 2008 08:57:01 +0930> From: [EMAIL PROTECTED]> To: [EMAIL 
> PROTECTED]> Subject: Re: [OSL | CCIE_RS] Physical port in etherchannel bundle 
> will not come up> CC: [email protected]> > What media type are 
> they? Same ZENPAKs at each end? Is the right> cable being used (SM vs MM etc) 
> Is the distance ok? Do you need> attenuators?> > Cheers,> Matt> > On 
> 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote:> >> >> > I am connecting 
> to core switches together via etherchannel on their 10G> > ports> > I AM 
> Running s72033-ipservices_wan-vz.122-18.SXF9.bin on> > THE 2 6509s for some 
> reason the 10G ports on core B will not come> > up. Current running Config 
> listed below. I do a no shut and it still says> > shut down> >> >> > 
> interface TenGigabitEthernet9/1> > switchport> > switchport trunk 
> encapsulation dot1q> > switchport mode trunk> > switchport nonegotiate> > no 
> ip address> > channel-group 1 mode on> > !> > interface 
> TenGigabitEthernet9/2> > switchport> > switchport trunk encapsulation dot1q> 
> > switchport mode trunk> > switchport nonegotiate> > no ip address> > 
> channel-group 1 mode on> >> >> > interface Port-channel1> > description 
> Etherchannel link to Core B> > switchport> > switchport trunk encapsulation 
> dot1q> > switchport mode trunk> > switchport nonegotiate> > no ip address> >> 
> > interface TenGigabitEthernet9/1> > description Etherchannel link to Core A> 
> > switchport> > switchport trunk encapsulation dot1q> > switchport mode 
> trunk> > switchport nonegotiate> > shutdown> > no ip address> > channel-group 
> 1 mode on> > !> > interface TenGigabitEthernet9/2> > description Etherchannel 
> link to Core A> > switchport> > switchport trunk encapsulation dot1q> > 
> switchport mode trunk> > switchport nonegotiate> > shutdown> > no ip address> 
> > channel-group 1 mode on> > interface Port-channel1> > description 
> Etherchannel Port to Core A> > switchport> > switchport trunk encapsulation 
> dot1q> > switchport mode trunk> > switchport nonegotiate> > no ip address> >> 
> >

Reply via email to