No worries mate... Good luck :)

Matt
CCSI #31207

On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote:
>
>
>
> Will try that and see what happens  will  lwt you know most likely tomorrow
> what the outcome was thanks for your  help
>
>  keith
>
>
>  ________________________________
>
>  > Date: Fri, 18 Apr 2008 09:04:36 +0930
>
> > From: [EMAIL PROTECTED]
> > To: [EMAIL PROTECTED]
> > Subject: Re: [OSL | CCIE_RS] Physical port in etherchannel bundle will not
> come up
> > CC: [email protected]
> >
> > Hmmm ok... Can the individual ports come up when they are not
> > bundled? Ie point to point? If you put the xenpaks from the working
> > blade into the not working blade does anything happen?
> >
> > On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote:
> > >
> > > Yes to all your questions Zenpaks at both ends right cable being used
> > > distance is 3ft so definitely not a problem No need for attenuators
> > >
> > >
> > >
> > > ________________________________
> > > > Date: Fri, 18 Apr 2008 08:57:01 +0930
> > > > From: [EMAIL PROTECTED]
> > > > To: [EMAIL PROTECTED]
> > > > Subject: Re: [OSL | CCIE_RS] Physical port in etherchannel bundle will
> not
> > > come up
> > > > CC: [email protected]
> > >
> > > >
> > > > What media type are they? Same ZENPAKs at each end? Is the right
> > > > cable being used (SM vs MM etc) Is the distance ok? Do you need
> > > > attenuators?
> > > >
> > > > Cheers,
> > > > Matt
> > > >
> > > > On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote:
> > > > >
> > > > >
> > > > > I am connecting to core switches together via etherchannel on their
> 10G
> > > > > ports
> > > > > I AM Running
> s72033-ipservices_wan-vz.122-18.SXF9.bin
> > > on
> > > > > THE 2 6509s for some reason the 10G ports on core B will not come
> > > > > up. Current running Config listed below. I do a no shut and it still
> > > says
> > > > > shut down
> > > > >
> > > > >
> > > > > interface TenGigabitEthernet9/1
> > > > > switchport
> > > > > switchport trunk encapsulation dot1q
> > > > > switchport mode trunk
> > > > > switchport nonegotiate
> > > > > no ip address
> > > > > channel-group 1 mode on
> > > > > !
> > > > > interface TenGigabitEthernet9/2
> > > > > switchport
> > > > > switchport trunk encapsulation dot1q
> > > > > switchport mode trunk
> > > > > switchport nonegotiate
> > > > > no ip address
> > > > > channel-group 1 mode on
> > > > >
> > > > >
> > > > > interface Port-channel1
> > > > > description Etherchannel link to Core B
> > > > > switchport
> > > > > switchport trunk encapsulation dot1q
> > > > > switchport mode trunk
> > > > > switchport nonegotiate
> > > > > no ip address
> > > > >
> > > > > interface TenGigabitEthernet9/1
> > > > > description Etherchannel link to Core A
> > > > > switchport
> > > > > switchport trunk encapsulation dot1q
> > > > > switchport mode trunk
> > > > > switchport nonegotiate
> > > > > shutdown
> > > > > no ip address
> > > > > channel-group 1 mode on
> > > > > !
> > > > > interface TenGigabitEthernet9/2
> > > > > description Etherchannel link to Core A
> > > > > switchport
> > > > > switchport trunk encapsulation dot1q
> > > > > switchport mode trunk
> > > > > switchport nonegotiate
> > > > > shutdown
> > > > > no ip address
> > > > > channel-group 1 mode on
> > > > > interface Port-channel1
> > > > > description Etherchannel Port to Core A
> > > > > switchport
> > > > > switchport trunk encapsulation dot1q
> > > > > switchport mode trunk
> > > > > switchport nonegotiate
> > > > > no ip address
> > > > >
> > > > >
> > >
>
>

Reply via email to