Will try that and see what happens will lwt you know most likely tomorrow what the outcome was thanks for your help keith
> Date: Fri, 18 Apr 2008 09:04:36 +0930> From: [EMAIL PROTECTED]> To: [EMAIL > PROTECTED]> Subject: Re: [OSL | CCIE_RS] Physical port in etherchannel bundle > will not come up> CC: [email protected]> > Hmmm ok... Can the > individual ports come up when they are not> bundled? Ie point to point? If > you put the xenpaks from the working> blade into the not working blade does > anything happen?> > On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote:> >> > > Yes to all your questions Zenpaks at both ends right cable being used> > > distance is 3ft so definitely not a problem No need for attenuators> >> >> >> > > ________________________________> > > Date: Fri, 18 Apr 2008 08:57:01 > +0930> > > From: [EMAIL PROTECTED]> > > To: [EMAIL PROTECTED]> > > Subject: > Re: [OSL | CCIE_RS] Physical port in etherchannel bundle will not> > come up> > > > CC: [email protected]> >> > >> > > What media type are they? > Same ZENPAKs at each end? Is the right> > > cable being used (SM vs MM etc) > Is the distance ok? Do you need> > > attenuators?> > >> > > Cheers,> > > > Matt> > >> > > On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote:> > > >> > > > >> > > > I am connecting to core switches together via etherchannel on > their 10G> > > > ports> > > > I AM Running > s72033-ipservices_wan-vz.122-18.SXF9.bin> > on> > > > THE 2 6509s for some > reason the 10G ports on core B will not come> > > > up. Current running > Config listed below. I do a no shut and it still> > says> > > > shut down> > > > >> > > >> > > > interface TenGigabitEthernet9/1> > > > switchport> > > > > switchport trunk encapsulation dot1q> > > > switchport mode trunk> > > > > switchport nonegotiate> > > > no ip address> > > > channel-group 1 mode on> > > > > !> > > > interface TenGigabitEthernet9/2> > > > switchport> > > > > switchport trunk encapsulation dot1q> > > > switchport mode trunk> > > > > switchport nonegotiate> > > > no ip address> > > > channel-group 1 mode on> > > > >> > > >> > > > interface Port-channel1> > > > description Etherchannel > link to Core B> > > > switchport> > > > switchport trunk encapsulation dot1q> > > > > switchport mode trunk> > > > switchport nonegotiate> > > > no ip > address> > > >> > > > interface TenGigabitEthernet9/1> > > > description > Etherchannel link to Core A> > > > switchport> > > > switchport trunk > encapsulation dot1q> > > > switchport mode trunk> > > > switchport > nonegotiate> > > > shutdown> > > > no ip address> > > > channel-group 1 mode > on> > > > !> > > > interface TenGigabitEthernet9/2> > > > description > Etherchannel link to Core A> > > > switchport> > > > switchport trunk > encapsulation dot1q> > > > switchport mode trunk> > > > switchport > nonegotiate> > > > shutdown> > > > no ip address> > > > channel-group 1 mode > on> > > > interface Port-channel1> > > > description Etherchannel Port to > Core A> > > > switchport> > > > switchport trunk encapsulation dot1q> > > > > switchport mode trunk> > > > switchport nonegotiate> > > > no ip address> > > > >> > > >> >
