Is the VL up what is the output of show ip ospf neighbor and show ip ospf interface on R5 and R7
On Fri, May 30, 2008 at 2:14 PM, Hooker, Jim <[EMAIL PROTECTED]> wrote: > Thx and that is in place but still no luck ... config portions below: > > R5: > interface Loopback0 > ip address 150.10.5.5 255.255.255.255 > ! > interface Loopback1 > ip address 188.5.254.254 255.255.255.255 > ! > interface FastEthernet0/0 > ip address 150.20.50.5 255.255.255.192 > ip ospf priority 255 > duplex auto > speed auto > ! > interface Serial0/1/0 > ip address 150.20.100.5 255.255.255.224 > encapsulation frame-relay > ip ospf message-digest-key 1 md5 ipexpert > ip ospf priority 0 > frame-relay map ip 150.20.100.2 502 broadcast > frame-relay map ip 150.20.100.4 502 broadcast > frame-relay map ip 150.20.100.5 502 > frame-relay map ip 150.20.100.6 502 broadcast > no frame-relay inverse-arp > frame-relay lmi-type cisco > frame-relay lmi-n391dte 18 > ! > interface Serial0/2/0 > ip address 10.20.25.5 255.255.255.240 > ! > router ospf 1 > log-adjacency-changes > area 0 authentication message-digest > area 30 virtual-link 150.10.7.7 message-digest-key 1 md5 ipexpert > redistribute connected subnets route-map loopd > network 150.20.50.5 0.0.0.0 area 30 > network 150.20.100.5 0.0.0.0 area 0 > ! > access-list 1 permit 188.5.254.254 > ! > route-map loopd permit 10 > match ip address 1 > > > R7: > interface Loopback0 > ip address 150.10.7.7 255.255.255.255 > ! > interface FastEthernet0/0 > ip address 150.20.50.7 255.255.255.192 > duplex auto > speed auto > ! > interface Serial0/0/0 > ip address 150.20.78.7 255.255.255.0 > no fair-queue > clock rate 2000000 > ! > router ospf 1 > log-adjacency-changes > area 30 virtual-link 188.5.254.254 message-digest-key 1 md5 ipexpert > network 150.20.50.7 0.0.0.0 area 30 > network 150.20.78.7 0.0.0.0 area 10 > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tyson Scott > Sent: Friday, May 30, 2008 2:08 PM > To: OSL CCIE Routing and Switching Lab Exam > Subject: Re: [OSL | CCIE_RS] lab 23 > > Area 10 is between R7 and R8 which goes through Area 30 to get to Area > 0 so you need a virtual link back to Area 0 for this area. The router > doesn't need to be a DR to distribute routes into area 0. I guess I > would need more detail to see what you have configured to know why it > isn't working. > > On Fri, May 30, 2008 at 1:57 PM, Hooker, Jim <[EMAIL PROTECTED]> > wrote: >> Just finished with the OSPF configuration in lab 23 but I've noticed > that >> networks in areas 10 & 30 are not seen by other area routers (chiefly, >> routers 2/4/5/6 that makeup area 0). My suspicion is that the problem > stems >> from both areas 10 & 30 peering with r5, which is not the DR (nor ever > will >> be) for the area 0 frame cloud. >> >> >> >> Can anyone shed some light on this? >> >> >> >> >> >> Thx in advance - >> >> >> >> Jim H >> >> >> >> ________________________________ >> This message is the property of Southern Wine & Spirits or its > affiliates. >> It is intended only for the use of the individual or entity to which > it is >> addressed and may contain information that is non-public, proprietary, >> privileged, confidential, and exempt from disclosure under applicable > law or >> may constitute as attorney work product. If you are not the intended >> recipient, you are hereby notified that any use, dissemination, >> distribution, or copying of this communication is strictly prohibited. > If >> you have received this communication in error, notify us immediately > by >> telephone and (i) destroy this message if a facsimile or (ii) delete > this >> message immediately if this is an electronic communication. >> Thank you. > > > > -- > Tyson Scott - CCIE #13513 R&S and Security > Technical Instructor - IPexpert, Inc. > > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > Mailto: [EMAIL PROTECTED] > > Join our free online support and peer group communities: > http://www.IPexpert.com/communities > > IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On > Demand and Audio Certification Training Tools for the Cisco CCIE R&S > Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and > CCIE Storage Lab Certifications. > -- Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications.
