In your config, R7 doesn't show "area 0 authentication message-digest". Is your VL showing as up?
Marvin Greenlee, CCIE #12237 (R&S, SP, Sec) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab, CCIE Voice Lab and CCIE Storage Lab Certifications. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hooker, Jim Sent: Friday, May 30, 2008 2:14 PM To: OSL CCIE Routing and Switching Lab Exam Subject: Re: [OSL | CCIE_RS] lab 23 Thx and that is in place but still no luck ... config portions below: R5: interface Loopback0 ip address 150.10.5.5 255.255.255.255 ! interface Loopback1 ip address 188.5.254.254 255.255.255.255 ! interface FastEthernet0/0 ip address 150.20.50.5 255.255.255.192 ip ospf priority 255 duplex auto speed auto ! interface Serial0/1/0 ip address 150.20.100.5 255.255.255.224 encapsulation frame-relay ip ospf message-digest-key 1 md5 ipexpert ip ospf priority 0 frame-relay map ip 150.20.100.2 502 broadcast frame-relay map ip 150.20.100.4 502 broadcast frame-relay map ip 150.20.100.5 502 frame-relay map ip 150.20.100.6 502 broadcast no frame-relay inverse-arp frame-relay lmi-type cisco frame-relay lmi-n391dte 18 ! interface Serial0/2/0 ip address 10.20.25.5 255.255.255.240 ! router ospf 1 log-adjacency-changes area 0 authentication message-digest area 30 virtual-link 150.10.7.7 message-digest-key 1 md5 ipexpert redistribute connected subnets route-map loopd network 150.20.50.5 0.0.0.0 area 30 network 150.20.100.5 0.0.0.0 area 0 ! access-list 1 permit 188.5.254.254 ! route-map loopd permit 10 match ip address 1 R7: interface Loopback0 ip address 150.10.7.7 255.255.255.255 ! interface FastEthernet0/0 ip address 150.20.50.7 255.255.255.192 duplex auto speed auto ! interface Serial0/0/0 ip address 150.20.78.7 255.255.255.0 no fair-queue clock rate 2000000 ! router ospf 1 log-adjacency-changes area 30 virtual-link 188.5.254.254 message-digest-key 1 md5 ipexpert network 150.20.50.7 0.0.0.0 area 30 network 150.20.78.7 0.0.0.0 area 10 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tyson Scott Sent: Friday, May 30, 2008 2:08 PM To: OSL CCIE Routing and Switching Lab Exam Subject: Re: [OSL | CCIE_RS] lab 23 Area 10 is between R7 and R8 which goes through Area 30 to get to Area 0 so you need a virtual link back to Area 0 for this area. The router doesn't need to be a DR to distribute routes into area 0. I guess I would need more detail to see what you have configured to know why it isn't working. On Fri, May 30, 2008 at 1:57 PM, Hooker, Jim <[EMAIL PROTECTED]> wrote: > Just finished with the OSPF configuration in lab 23 but I've noticed that > networks in areas 10 & 30 are not seen by other area routers (chiefly, > routers 2/4/5/6 that makeup area 0). My suspicion is that the problem stems > from both areas 10 & 30 peering with r5, which is not the DR (nor ever will > be) for the area 0 frame cloud. > > > > Can anyone shed some light on this? > > > > > > Thx in advance - > > > > Jim H > > > > ________________________________ > This message is the property of Southern Wine & Spirits or its affiliates. > It is intended only for the use of the individual or entity to which it is > addressed and may contain information that is non-public, proprietary, > privileged, confidential, and exempt from disclosure under applicable law or > may constitute as attorney work product. If you are not the intended > recipient, you are hereby notified that any use, dissemination, > distribution, or copying of this communication is strictly prohibited. If > you have received this communication in error, notify us immediately by > telephone and (i) destroy this message if a facsimile or (ii) delete this > message immediately if this is an electronic communication. > Thank you. -- Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications.
