Manouchehr,
all your questions can be answered by looking at the official cisco ccie page: http://www.cisco.com/web/learning/le3/ccie/rs/index.html on the right hand side you can see a link called "lab equipment & ios" There are many other very interesting infos on this page regards Roger Von: [email protected] [mailto:[email protected]] Im Auftrag von MANNY Omari Gesendet: Mittwoch, 10. Juni 2009 12:04 An: [email protected] Cc: [email protected] Betreff: Re: [OSL | CCIE_RS] Dynamips Hello Michael, I hope you are doing well. Thank you very much for the advice, will you pleaser advice which model Switch do i need to buy? can please provide me full specification of the switch i will try to get used one from ebay. Best Regards Manouchehr _____ Date: Wed, 10 Jun 2009 05:42:16 -0400 Subject: Re: [OSL | CCIE_RS] Dynamips From: [email protected] To: [email protected] CC: [email protected]; [email protected] MANNY, You cannot do a full lab with just dynamips - the NM-16ESW cannot emulate the full functionality of the 3550/3560 switches; however, you should be able to practice all the routing topics and supplement with rack time if your budget doesn't allow you to buy the 4 switches you'll need. My study lab is a combination of dynamips and four switches which I prefer, but it is still expensive to do it this way. It probably is cheaper to buy rack time but I wanted to be able to do any study topic at any time. Michael 2009/6/10 MANNY Omari <[email protected]> Hello Sir, Thank you very much great work, I have one question Do I need physical hardware (Router/Switch) to fully with Dynamips or i can do all with Dynamips for the CCIE R&S v4? Best Regards Manouchehr CCNP - CCNA > From: [email protected] > To: [email protected]; [email protected] > Date: Wed, 10 Jun 2009 00:17:52 -0400 > Subject: [OSL | CCIE_RS] Dynamips > > Hey Guys, > > After some feedback and since I was in a OWLE today and couldn't work on > labs or my main project work I used my spare time today to Go over the > Dynamips I had handed out before. I did some further testing and I was > incorrect in having two NM-16ESW's in one chassis so I am attaching my new > .net file that I used today. > > I found that I was able to get it work with about 1.6GB of Memory and you > can probably run the full topology with a dual core. It may be a little > sluggish. But with a Quad Core it really hums away. > > Here is the full .net file. I will also be uploading it to the > Configuration Group For OSL. I have already uploaded updated diagrams to > the R&S section for this. My formatting is a little screwed up below but it > should be good. > > If you use the exact image I have shown below the IDLE PC values will work > as shown below. If not you will need to re-calculate the IDLE-PC Values > This was run on Fedora Core 10 x64 edition. > > A few recommendations when running the topology. > > 1. If possible, only do a SINGLE trunk between routers with the 16 port > ethernet modules. Dynamips has a really hard time and can set itself into > broadcast storms when there are multiple. If you have to do multiple, you > should enable ALL ports on every device. If you have one side enabled and > the other shutdown, it's almost a sure loop once you start creating your > VLANs > > 2. Don't start more than three router instances at a time - then let them > finish booting and let your CPU return to normal > > 3. Create all your access ports, and THEN add the config under "vlan dat" > - this helps minimize broadcast storms. > > 4. Delete your files from your working directory AND recycle bin after each > dynamips session. > > > #============================================================== > # > # NAME: IPexpert_Dynamips_RS-SP.net > # CONTRIBUTORS: > # Tyson Scott ([email protected]) > # DATE : 06/09/2009 > # PURPOSE: Define Virtual Network Topology for CCIE Training > # REQUIREMENTS: Dynamips and Dynagen or GNS3. > # > #============================================================== > > > # *** Either Set the autstart to *** > # False - Do not start each device automatically > # True - Start Each device upon hypervisor Execution > autostart = False > > ############################### > # # > # First Hypervisor # > # # > ############################### > > [localhost:7201] > # > # Uncomment the appropriate Line for the Operating system you are > running > # *** Windows Working Directory *** > #workingdir = C:\DYNAMIPS\Working > # > # *** Linux Working Directory *** > workingdir = /home/tyson/DYNAMIPS/Working/ > # > udp = 10100 > > [[3725]] > # > # Uncomment the appropriate Line for the Operating system you > are running > #*** Windows IMAGE PATH *** > #image = > C:\DYNAMIPS\IMAGES\c3725-adventerprisek9-mz.124-15.T9.bin.unpacked > # > #*** Linux IMAGE PATH *** > image = > /home/tyson/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T9.bin.unpacked > # > ram = 256 > > [[ROUTER R1]] > model = 3725 > console = 2001 > autostart = False > ghostios = true > sparsemem = true > # > idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R1.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R1.txt > f0/0 = Cat1 f1/1 > f0/1 = Cat2 f1/1 > > [[ROUTER R2]] > model = 3725 > console = 2002 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R2.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R2.txt > s0/1 = FR-Switch 2 > s0/2 = R5 s0/2 > slot1 = NM-16ESW > f1/0 = Cat1 f1/2 > f1/1 = Cat3 f1/2 > > [[ROUTER R4]] > model = 3725 > console = 2004 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R4.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R4.txt > s0/1 = FR-Switch 4 > f0/0 = Cat1 f1/4 > f0/1 = Cat3 f1/4 > > [[ROUTER R5]] > model = 3725 > console = 2005 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R5.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R5.txt > s0/1 = FR-Switch 5 > s0/2 = R2 s0/2 > f0/0 = Cat1 f1/5 > f0/1 = Cat3 f1/5 > > ############################### > # # > # Second Hypervisor # > # # > ############################### > > [localhost:7202] > # > # Uncomment the appropriate Line for the Operating system you are > running > # *** Windows Working Directory *** > #workingdir = C:\DYNAMIPS\Working > # > # *** Linux Working Directory *** > workingdir = /home/tyson/DYNAMIPS/Working/ > # > udp = 10200 > > [[3725]] > # > # Uncomment the appropriate Line for the Operating system you > are running > #*** Windows IMAGE PATH *** > #image = > C:\DYNAMIPS\IMAGES\c3725-adventerprisek9-mz.124-15.T9.bin.unpacked > # > #*** Linux IMAGE PATH *** > image = > /home/tyson/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T9.bin.unpacked > # > ram = 256 > > [[ROUTER R6]] > model = 3725 > console = 2006 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R6.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R6.txt > s0/1 = FR-Switch 6 > f0/0 = Cat2 f1/6 > f0/1 = Cat4 f1/6 > slot2 = NM-4T > s2/0 = R9 s2/0 > s2/1 = R9 s2/1 > > [[ROUTER R7]] > model = 3725 > console = 2007 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R7.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R7.txt > s0/0 = R8 s0/0 > f0/0 = Cat2 f1/7 > f0/1 = Cat4 f1/7 > > [[ROUTER R8]] > model = 3725 > console = 2008 > autostart = False > ghostios = true > sparsemem = true > idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R8.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R8.txt > s0/0 = R7 s0/0 > f0/0 = Cat2 f1/8 > f0/1 = Cat4 f1/8 > > [[ROUTER R9]] > model = 3725 > console = 2009 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\R9.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R9.txt > f0/0 = Cat2 f1/9 > f0/1 = Cat4 f1/9 > slot2 = NM-4T > s2/0 = R6 s2/0 > s2/1 = R6 s2/1 > > ############################### > # # > # Third Hypervisor # > # # > ############################### > [localhost:7203] > # > # Uncomment the appropriate Line for the Operating system you are > running > # *** Windows Working Directory *** > #workingdir = C:\DYNAMIPS\Working > # > # *** Linux Working Directory *** > workingdir = /home/tyson/DYNAMIPS/Working/ > # > udp = 10300 > > [[3725]] > # > # Uncomment the appropriate Line for the Operating system you > are running > #*** Windows IMAGE PATH *** > #image = > C:\DYNAMIPS\IMAGES\c3725-adventerprisek9-mz.124-15.T9.bin.unpacked > # > #*** Linux IMAGE PATH *** > image = > /home/tyson/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T9.bin.unpacked > # > ram = 256 > > [[ROUTER Cat1]] > model = 3725 > console = 2010 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\Cat1.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat1.txt > slot1 = NM-16ESW > f1/0 = Cat2 f1/0 > f1/1 = R1 f0/0 > f1/2 = R2 f1/0 > f1/4 = R4 f0/0 > f1/5 = R5 f0/0 > f1/9 = BB1 e0/0 > f1/10 = Cat4 f1/10 > f1/11 = Cat4 f1/11 > f1/12 = Cat3 f1/12 > f1/13 = Cat3 f1/13 > f1/14 = Cat2 f1/14 > f1/15 = Cat2 f1/15 > > [[ROUTER Cat2]] > model = 3725 > console = 2014 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > idlepc = 0x60c05044 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\Cat2.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat2.txt > slot1 = NM-16ESW > f1/0 = Cat1 f1/0 > f1/1 = R1 f0/1 > f1/2 = BB2 e0/0 > f1/3 = BB3 e0/0 > f1/6 = R6 f0/0 > f1/7 = R7 f0/0 > f1/8 = R8 f0/0 > f1/9 = R9 f0/0 > f1/10 = Cat3 f1/10 > f1/11 = Cat3 f1/11 > f1/12 = Cat4 f1/12 > f1/13 = Cat4 f1/13 > f1/14 = Cat1 f1/14 > f1/15 = Cat1 f1/15 > > [[ROUTER Cat3]] > model = 3725 > console = 2015 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > #idlepc = 0x614ab010 > idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\Cat3.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat3.txt > slot1 = NM-16ESW > f1/2 = R2 f1/1 > f1/4 = R4 f0/1 > f1/5 = R5 f0/1 > f1/10 = Cat2 f1/10 > f1/11 = Cat2 f1/11 > f1/12 = Cat1 f1/12 > f1/13 = Cat1 f1/13 > f1/14 = Cat4 f1/14 > f1/15 = Cat4 f1/15 > > [[ROUTER Cat4]] > model = 3725 > console = 2016 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x62b200d8 > #idlepc = 0x62b200dc > #idlepc = 0x60c0aa58 > idlepc = 0x614ab010 > #idlepc = 0x614ab070 > #idlepc = 0x614ab0b8 > #idlepc = 0x614ab0cc > #idlepc = 0x6026b438 > #idlepc = 0x62b1c780 > #idlepc = 0x60c05010 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\Cat4.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat4.txt > slot1 = NM-16ESW > f1/6 = R6 f0/1 > f1/7 = R7 f0/1 > f1/8 = R8 f0/1 > f1/9 = R9 f0/1 > f1/10 = Cat1 f1/10 > f1/11 = Cat1 f1/11 > f1/12 = Cat2 f1/12 > f1/13 = Cat2 f1/13 > f1/14 = Cat3 f1/14 > f1/15 = Cat3 f1/15 > > ############################### > # # > # Fourth Hypervisor # > # # > ############################### > [localhost:7204] > # > # Uncomment the appropriate Line for the Operating system you are > running > # *** Windows Working Directory *** > #workingdir = C:\DYNAMIPS\Working > # > # *** Linux Working Directory *** > workingdir = /home/tyson/DYNAMIPS/Working/ > # > udp = 10400 > > [[2610]] > # > # Uncomment the appropriate Line for the Operating system you > are running > #*** Windows IMAGE PATH *** > #image = C:\DYNAMIPS\IMAGES\c2600-j1s3-mz.123-26.bin.unpacked > # > #*** Linux IMAGE PATH *** > image = > /home/tyson/DYNAMIPS/IMAGES/c2600-j1s3-mz.123-26.bin.unpacked > # > chassis = 2610 > > [[ROUTER BB1]] > model = 2610 > console = 2011 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x803d0234 > #idlepc = 0x803d0bd4 > idlepc = 0x803d0d18 > #idlepc = 0x802f9a80 > #idlepc = 0x802f9ab4 > #idlepc = 0x802f9ac8 > #idlepc = 0x8043aed0 > #idlepc = 0x803cddb8 > #idlepc = 0x803cef64 > #cnfg = C:\DYNAMIPS\Startup_Configs\BB3.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/BB3.txt > e0/0 = Cat1 f1/9 > > [[ROUTER BB2]] > model = 2610 > console = 2012 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x803d0234 > #idlepc = 0x803d0bd4 > #idlepc = 0x803d0d18 > idlepc = 0x802f9a80 > #idlepc = 0x802f9ab4 > #idlepc = 0x802f9ac8 > #idlepc = 0x8043aed0 > #idlepc = 0x803cddb8 > #idlepc = 0x803cef64 > #cnfg = C:\DYNAMIPS\Startup_Configs\BB2.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/BB2.txt > e0/0 = Cat2 f1/2 > > [[ROUTER BB3]] > model = 2610 > console = 2013 > autostart = False > ghostios = true > sparsemem = true > #idlepc = 0x803d0234 > #idlepc = 0x803d0bd4 > #idlepc = 0x803d0d18 > #idlepc = 0x802f9a80 > idlepc = 0x802f9ab4 > #idlepc = 0x802f9ac8 > #idlepc = 0x8043aed0 > #idlepc = 0x803cddb8 > #idlepc = 0x803cef64 > #*** Windows Configuration PATH *** > #cnfg = C:\DYNAMIPS\Startup_Configs\BB1.txt > # > #*** Linux Configuration PATH *** > cnfg = /home/tyson/DYNAMIPS/Startup_Configs/BB1.txt > e0/0 = Cat2 f1/3 > > [[FRSW FR-Switch]] > 2:204 = 4:402 > 2:205 = 5:502 > 2:206 = 6:602 > 2:214 = 4:412 > 2:215 = 5:512 > 2:216 = 6:612 > 2:224 = 4:422 > 2:225 = 5:522 > 2:226 = 6:622 > 4:402 = 2:204 > 4:405 = 5:504 > 4:406 = 6:604 > 4:412 = 2:214 > 4:415 = 5:514 > 4:416 = 6:614 > 4:422 = 2:224 > 4:425 = 5:524 > 4:426 = 6:624 > 5:502 = 2:205 > 5:504 = 4:405 > 5:506 = 6:605 > 5:512 = 2:215 > 5:514 = 4:415 > 5:516 = 6:615 > 5:522 = 2:225 > 5:524 = 4:425 > 5:526 = 6:625 > 6:602 = 2:206 > 6:604 = 4:406 > 6:605 = 5:506 > 6:612 = 2:216 > 6:614 = 4:416 > 6:615 = 5:516 > 6:622 = 2:226 > 6:624 = 4:426 > 6:625 = 5:526 > > Regards, > > Tyson Scott - CCIE #13513 R&S and Security > Technical Instructor - IPexpert, Inc. > > Telephone: +1.810.326.1444 > Cell: +1.248.504.7309 > Fax: +1.810.454.0130 > Mailto: [email protected] > > Join our free online support and peer group communities: > http://www.IPexpert.com/communities > > IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand > and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE > Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage > Lab Certifications. > > > _____ Windows LiveT: Keep your life in sync. Check <http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009> it out! _____ What can you do with the new Windows Live? Find <http://www.microsoft.com/windows/windowslive/default.aspx> out
