Hi,
How do you accomplish the thing with one nic and using dot1q? (Ie..
the setup of the whole thing)?
michael haynes wrote:
If you are studying for the V4 exam, the equipment will be all Cisco
3560s. Typically the lab workbooks from both IPExpert and INE use 4
switches. You'll want the Advanced IP Services image to run (at least
12.2 (25) I believe). I think this image requires either 128 mb to
run. You'll see two types listed : PS which is Power of Ethernet, and
TS which is not. If you are planning to study for the VOIP track
later, you might want to go ahead and make sure you buy a PoE capable
switch; otherwise, don't worry about that too much. You probably will
want the 24 port models although you might be able to get away with
modifying the labs to use 8 ports.
With dynamips, you have a couple ways to connect the switches. You
can either buy enough nics (think: quad nic cards) to have a separate
connection from the PC to each switchport; or, if you have a single
nic gig card that is capable of dot1q trunking, you can buy a fifth
switch to use as a breakout switch. This is what I did and so far it
works pretty well.
Hope this information helps.
Michael
2009/6/10 MANNY Omari <[email protected]
<mailto:[email protected]>>
Hello Michael,
I hope you are doing well. Thank you very much for the advice,
will you pleaser advice which model Switch do i need to buy?
can please provide me full specification of the switch i will try
to get used one from ebay.
Best Regards
Manouchehr
------------------------------------------------------------------------
Date: Wed, 10 Jun 2009 05:42:16 -0400
Subject: Re: [OSL | CCIE_RS] Dynamips
From: [email protected] <mailto:[email protected]>
To: [email protected] <mailto:[email protected]>
CC: [email protected] <mailto:[email protected]>;
[email protected] <mailto:[email protected]>
MANNY,
You cannot do a full lab with just dynamips - the NM-16ESW cannot
emulate the full functionality of the 3550/3560 switches; however,
you should be able to practice all the routing topics and
supplement with rack time if your budget doesn't allow you to buy
the 4 switches you'll need.
My study lab is a combination of dynamips and four switches which
I prefer, but it is still expensive to do it this way. It
probably is cheaper to buy rack time but I wanted to be able to do
any study topic at any time.
Michael
2009/6/10 MANNY Omari <[email protected]
<mailto:[email protected]>>
Hello Sir,
Thank you very much great work, I have one question Do I need
physical hardware (Router/Switch) to fully with Dynamips or i
can do all with Dynamips for the CCIE R&S v4?
Best Regards
Manouchehr
CCNP - CCNA
> From: [email protected] <mailto:[email protected]>
> To: [email protected]
<mailto:[email protected]>;
[email protected]
<mailto:[email protected]>
> Date: Wed, 10 Jun 2009 00:17:52 -0400
> Subject: [OSL | CCIE_RS] Dynamips
>
> Hey Guys,
>
> After some feedback and since I was in a OWLE today and
couldn’t work on
> labs or my main project work I used my spare time today to
Go over the
> Dynamips I had handed out before. I did some further testing
and I was
> incorrect in having two NM-16ESW’s in one chassis so I am
attaching my new
> .net file that I used today.
>
> I found that I was able to get it work with about 1.6GB of
Memory and you
> can probably run the full topology with a dual core. It may
be a little
> sluggish. But with a Quad Core it really hums away.
>
> Here is the full .net file. I will also be uploading it to the
> Configuration Group For OSL. I have already uploaded updated
diagrams to
> the R&S section for this. My formatting is a little screwed
up below but it
> should be good.
>
> If you use the exact image I have shown below the IDLE PC
values will work
> as shown below. If not you will need to re-calculate the
IDLE-PC Values
> This was run on Fedora Core 10 x64 edition.
>
> A few recommendations when running the topology.
>
> 1. If possible, only do a SINGLE trunk between routers with
the 16 port
> ethernet modules. Dynamips has a really hard time and can
set itself into
> broadcast storms when there are multiple. If you have to do
multiple, you
> should enable ALL ports on every device. If you have one
side enabled and
> the other shutdown, it's almost a sure loop once you start
creating your
> VLANs
>
> 2. Don't start more than three router instances at a time -
then let them
> finish booting and let your CPU return to normal
>
> 3. Create all your access ports, and THEN add the config
under "vlan dat"
> - this helps minimize broadcast storms.
>
> 4. Delete your files from your working directory AND recycle
bin after each
> dynamips session.
>
>
> #==============================================================
> #
> # NAME: IPexpert_Dynamips_RS-SP.net
> # CONTRIBUTORS:
> # Tyson Scott ([email protected]
<mailto:[email protected]>)
> # DATE : 06/09/2009
> # PURPOSE: Define Virtual Network Topology for CCIE Training
> # REQUIREMENTS: Dynamips and Dynagen or GNS3.
> #
> #==============================================================
>
>
> # *** Either Set the autstart to ***
> # False - Do not start each device automatically
> # True - Start Each device upon hypervisor Execution
> autostart = False
>
> ###############################
> # #
> # First Hypervisor #
> # #
> ###############################
>
> [localhost:7201]
> #
> # Uncomment the appropriate Line for the Operating system
you are
> running
> # *** Windows Working Directory ***
> #workingdir = C:\DYNAMIPS\Working
> #
> # *** Linux Working Directory ***
> workingdir = /home/tyson/DYNAMIPS/Working/
> #
> udp = 10100
>
> [[3725]]
> #
> # Uncomment the appropriate Line for the Operating system you
> are running
> #*** Windows IMAGE PATH ***
> #image =
>
C:\DYNAMIPS\IMAGES\c3725-adventerprisek9-mz.124-15.T9.bin.unpacked
> #
> #*** Linux IMAGE PATH ***
> image =
>
/home/tyson/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T9.bin.unpacked
> #
> ram = 256
>
> [[ROUTER R1]]
> model = 3725
> console = 2001
> autostart = False
> ghostios = true
> sparsemem = true
> #
> idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R1.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R1.txt
> f0/0 = Cat1 f1/1
> f0/1 = Cat2 f1/1
>
> [[ROUTER R2]]
> model = 3725
> console = 2002
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R2.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R2.txt
> s0/1 = FR-Switch 2
> s0/2 = R5 s0/2
> slot1 = NM-16ESW
> f1/0 = Cat1 f1/2
> f1/1 = Cat3 f1/2
>
> [[ROUTER R4]]
> model = 3725
> console = 2004
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R4.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R4.txt
> s0/1 = FR-Switch 4
> f0/0 = Cat1 f1/4
> f0/1 = Cat3 f1/4
>
> [[ROUTER R5]]
> model = 3725
> console = 2005
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R5.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R5.txt
> s0/1 = FR-Switch 5
> s0/2 = R2 s0/2
> f0/0 = Cat1 f1/5
> f0/1 = Cat3 f1/5
>
> ###############################
> # #
> # Second Hypervisor #
> # #
> ###############################
>
> [localhost:7202]
> #
> # Uncomment the appropriate Line for the Operating system
you are
> running
> # *** Windows Working Directory ***
> #workingdir = C:\DYNAMIPS\Working
> #
> # *** Linux Working Directory ***
> workingdir = /home/tyson/DYNAMIPS/Working/
> #
> udp = 10200
>
> [[3725]]
> #
> # Uncomment the appropriate Line for the Operating system you
> are running
> #*** Windows IMAGE PATH ***
> #image =
>
C:\DYNAMIPS\IMAGES\c3725-adventerprisek9-mz.124-15.T9.bin.unpacked
> #
> #*** Linux IMAGE PATH ***
> image =
>
/home/tyson/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T9.bin.unpacked
> #
> ram = 256
>
> [[ROUTER R6]]
> model = 3725
> console = 2006
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R6.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R6.txt
> s0/1 = FR-Switch 6
> f0/0 = Cat2 f1/6
> f0/1 = Cat4 f1/6
> slot2 = NM-4T
> s2/0 = R9 s2/0
> s2/1 = R9 s2/1
>
> [[ROUTER R7]]
> model = 3725
> console = 2007
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R7.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R7.txt
> s0/0 = R8 s0/0
> f0/0 = Cat2 f1/7
> f0/1 = Cat4 f1/7
>
> [[ROUTER R8]]
> model = 3725
> console = 2008
> autostart = False
> ghostios = true
> sparsemem = true
> idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R8.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R8.txt
> s0/0 = R7 s0/0
> f0/0 = Cat2 f1/8
> f0/1 = Cat4 f1/8
>
> [[ROUTER R9]]
> model = 3725
> console = 2009
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\R9.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/R9.txt
> f0/0 = Cat2 f1/9
> f0/1 = Cat4 f1/9
> slot2 = NM-4T
> s2/0 = R6 s2/0
> s2/1 = R6 s2/1
>
> ###############################
> # #
> # Third Hypervisor #
> # #
> ###############################
> [localhost:7203]
> #
> # Uncomment the appropriate Line for the Operating system
you are
> running
> # *** Windows Working Directory ***
> #workingdir = C:\DYNAMIPS\Working
> #
> # *** Linux Working Directory ***
> workingdir = /home/tyson/DYNAMIPS/Working/
> #
> udp = 10300
>
> [[3725]]
> #
> # Uncomment the appropriate Line for the Operating system you
> are running
> #*** Windows IMAGE PATH ***
> #image =
>
C:\DYNAMIPS\IMAGES\c3725-adventerprisek9-mz.124-15.T9.bin.unpacked
> #
> #*** Linux IMAGE PATH ***
> image =
>
/home/tyson/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T9.bin.unpacked
> #
> ram = 256
>
> [[ROUTER Cat1]]
> model = 3725
> console = 2010
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\Cat1.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat1.txt
> slot1 = NM-16ESW
> f1/0 = Cat2 f1/0
> f1/1 = R1 f0/0
> f1/2 = R2 f1/0
> f1/4 = R4 f0/0
> f1/5 = R5 f0/0
> f1/9 = BB1 e0/0
> f1/10 = Cat4 f1/10
> f1/11 = Cat4 f1/11
> f1/12 = Cat3 f1/12
> f1/13 = Cat3 f1/13
> f1/14 = Cat2 f1/14
> f1/15 = Cat2 f1/15
>
> [[ROUTER Cat2]]
> model = 3725
> console = 2014
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> idlepc = 0x60c05044
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\Cat2.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat2.txt
> slot1 = NM-16ESW
> f1/0 = Cat1 f1/0
> f1/1 = R1 f0/1
> f1/2 = BB2 e0/0
> f1/3 = BB3 e0/0
> f1/6 = R6 f0/0
> f1/7 = R7 f0/0
> f1/8 = R8 f0/0
> f1/9 = R9 f0/0
> f1/10 = Cat3 f1/10
> f1/11 = Cat3 f1/11
> f1/12 = Cat4 f1/12
> f1/13 = Cat4 f1/13
> f1/14 = Cat1 f1/14
> f1/15 = Cat1 f1/15
>
> [[ROUTER Cat3]]
> model = 3725
> console = 2015
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> #idlepc = 0x614ab010
> idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\Cat3.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat3.txt
> slot1 = NM-16ESW
> f1/2 = R2 f1/1
> f1/4 = R4 f0/1
> f1/5 = R5 f0/1
> f1/10 = Cat2 f1/10
> f1/11 = Cat2 f1/11
> f1/12 = Cat1 f1/12
> f1/13 = Cat1 f1/13
> f1/14 = Cat4 f1/14
> f1/15 = Cat4 f1/15
>
> [[ROUTER Cat4]]
> model = 3725
> console = 2016
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x62b200d8
> #idlepc = 0x62b200dc
> #idlepc = 0x60c0aa58
> idlepc = 0x614ab010
> #idlepc = 0x614ab070
> #idlepc = 0x614ab0b8
> #idlepc = 0x614ab0cc
> #idlepc = 0x6026b438
> #idlepc = 0x62b1c780
> #idlepc = 0x60c05010
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\Cat4.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/Cat4.txt
> slot1 = NM-16ESW
> f1/6 = R6 f0/1
> f1/7 = R7 f0/1
> f1/8 = R8 f0/1
> f1/9 = R9 f0/1
> f1/10 = Cat1 f1/10
> f1/11 = Cat1 f1/11
> f1/12 = Cat2 f1/12
> f1/13 = Cat2 f1/13
> f1/14 = Cat3 f1/14
> f1/15 = Cat3 f1/15
>
> ###############################
> # #
> # Fourth Hypervisor #
> # #
> ###############################
> [localhost:7204]
> #
> # Uncomment the appropriate Line for the Operating system
you are
> running
> # *** Windows Working Directory ***
> #workingdir = C:\DYNAMIPS\Working
> #
> # *** Linux Working Directory ***
> workingdir = /home/tyson/DYNAMIPS/Working/
> #
> udp = 10400
>
> [[2610]]
> #
> # Uncomment the appropriate Line for the Operating system you
> are running
> #*** Windows IMAGE PATH ***
> #image = C:\DYNAMIPS\IMAGES\c2600-j1s3-mz.123-26.bin.unpacked
> #
> #*** Linux IMAGE PATH ***
> image =
> /home/tyson/DYNAMIPS/IMAGES/c2600-j1s3-mz.123-26.bin.unpacked
> #
> chassis = 2610
>
> [[ROUTER BB1]]
> model = 2610
> console = 2011
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x803d0234
> #idlepc = 0x803d0bd4
> idlepc = 0x803d0d18
> #idlepc = 0x802f9a80
> #idlepc = 0x802f9ab4
> #idlepc = 0x802f9ac8
> #idlepc = 0x8043aed0
> #idlepc = 0x803cddb8
> #idlepc = 0x803cef64
> #cnfg = C:\DYNAMIPS\Startup_Configs\BB3.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/BB3.txt
> e0/0 = Cat1 f1/9
>
> [[ROUTER BB2]]
> model = 2610
> console = 2012
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x803d0234
> #idlepc = 0x803d0bd4
> #idlepc = 0x803d0d18
> idlepc = 0x802f9a80
> #idlepc = 0x802f9ab4
> #idlepc = 0x802f9ac8
> #idlepc = 0x8043aed0
> #idlepc = 0x803cddb8
> #idlepc = 0x803cef64
> #cnfg = C:\DYNAMIPS\Startup_Configs\BB2.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/BB2.txt
> e0/0 = Cat2 f1/2
>
> [[ROUTER BB3]]
> model = 2610
> console = 2013
> autostart = False
> ghostios = true
> sparsemem = true
> #idlepc = 0x803d0234
> #idlepc = 0x803d0bd4
> #idlepc = 0x803d0d18
> #idlepc = 0x802f9a80
> idlepc = 0x802f9ab4
> #idlepc = 0x802f9ac8
> #idlepc = 0x8043aed0
> #idlepc = 0x803cddb8
> #idlepc = 0x803cef64
> #*** Windows Configuration PATH ***
> #cnfg = C:\DYNAMIPS\Startup_Configs\BB1.txt
> #
> #*** Linux Configuration PATH ***
> cnfg = /home/tyson/DYNAMIPS/Startup_Configs/BB1.txt
> e0/0 = Cat2 f1/3
>
> [[FRSW FR-Switch]]
> 2:204 = 4:402
> 2:205 = 5:502
> 2:206 = 6:602
> 2:214 = 4:412
> 2:215 = 5:512
> 2:216 = 6:612
> 2:224 = 4:422
> 2:225 = 5:522
> 2:226 = 6:622
> 4:402 = 2:204
> 4:405 = 5:504
> 4:406 = 6:604
> 4:412 = 2:214
> 4:415 = 5:514
> 4:416 = 6:614
> 4:422 = 2:224
> 4:425 = 5:524
> 4:426 = 6:624
> 5:502 = 2:205
> 5:504 = 4:405
> 5:506 = 6:605
> 5:512 = 2:215
> 5:514 = 4:415
> 5:516 = 6:615
> 5:522 = 2:225
> 5:524 = 4:425
> 5:526 = 6:625
> 6:602 = 2:206
> 6:604 = 4:406
> 6:605 = 5:506
> 6:612 = 2:216
> 6:614 = 4:416
> 6:615 = 5:516
> 6:622 = 2:226
> 6:624 = 4:426
> 6:625 = 5:526
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S and Security
> Technical Instructor - IPexpert, Inc.
>
> Telephone: +1.810.326.1444
> Cell: +1.248.504.7309
> Fax: +1.810.454.0130
> Mailto: [email protected] <mailto:[email protected]>
>
> Join our free online support and peer group communities:
> http://www.IPexpert.com/communities
<http://www.ipexpert.com/communities>
>
> IPexpert - The Global Leader in Self-Study, Classroom-Based,
Video On Demand
> and Audio Certification Training Tools for the Cisco CCIE
R&S Lab, CCIE
> Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage
> Lab Certifications.
>
>
>
------------------------------------------------------------------------
Windows Live™: Keep your life in sync. Check it out!
<http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009>
------------------------------------------------------------------------
What can you do with the new Windows Live? Find out
<http://www.microsoft.com/windows/windowslive/default.aspx>
--
// Freedom Matters
// Follow my progress on: http://kpjungle.wordpress.com
