Hi Bryan, (Further Clarity on the Access-list question.)
Using the indicated network address, maybe coming from the backbone
router. A question may come as follows:
110.20.21.1 255.255.255.0
110.20.22.1 255.255.255.0
110.20.23.1 255.255.255.0
110.20.24.1 255.255.255.0
110.20.25.1 255.255.255.0
110.20.25.1 255.255.255.0
|
V
110.20.85.1 255.255.255.0
a) There are sometimes questions about matching even or odd
routes in the third octet routes.
b) In some cases you have questions on matching routes from 45 -
79 in the 3rd octed.
Now with the above questions examples, I need to know the approach and
the best way to approach this. I hope the question is much clearer.
Kind Regards,
Jowi Nkwe (JM)
Office Tel: 012 311 1010
[email protected] <mailto:[email protected]>
"In Prosperity Our Friends Know Us.
In Adversity We Know Our Friends."
From: Bryan Bartik [mailto:[email protected]]
Sent: 25 June 2009 05:01 PM
To: Jared Scrivener
Cc: Jowi Nkwe (JM); [email protected]
Subject: Re: [OSL | CCIE_RS] HSRPv1 and HSRPv2 : Differences &
Access-lists...
Jowi,
I don't understand question #2, Can you explain in a little more
detail? Thanks,
On Thu, Jun 25, 2009 at 4:28 AM, Jared Scrivener
<[email protected]> wrote:
Hey Jowi,
For HSRPv2 read:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gthsrpv
2.html
I don't have a good document on your ACL question right now (or time
to
write an essay on it), so I'll leave that to someone else to respond
to.
Oh, I like your signature quotation BTW: it's very insightful.
Cheers,
Jared Scrivener CCIE3 #16983 (R&S, Security, SP), CISSP
Sr. Technical Instructor - IPexpert, Inc.
URL: http://www.IPexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [email protected]
> From: "Jowi Nkwe (JM)" <[email protected]>
> Date: Thu, 25 Jun 2009 10:11:21 +0200
> To: <[email protected]>
> Subject: [OSL | CCIE_RS] HSRPv1 and HSRPv2 : Differences &
Access-lists...
>
>
> Good Day,
>
> Just wanted to ask a quick questions on the following two issues:
>
> 1) Difference between HSRPv1 and HSRPv2, in terms of configuration
> additions. I think the multicast
> address used changed to 224.0.0.102 from 224.0.0.2.
> 2) Access-lists: matching networks routes, selecting specific
hosts/IP
> addresses, etc. What is the best
> source with examples... Can't find this on DocCD.
>
> Thanks in anticipation.
>
> Kind Regards,
> Jowi
>
>
> "In Prosperity Our Friends Know Us.
> In Adversity We Know Our Friends."
>
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of
> [email protected]
> Sent: 25 June 2009 04:02 AM
> To: [email protected]
> Subject: CCIE_RS Digest, Vol 41, Issue 89
>
> Send CCIE_RS mailing list submissions to
> [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
> or, via email, send a message with subject or body 'help' to
> [email protected]
>
> You can reach the person managing the list at
> [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_RS digest..."
>
>
> Today's Topics:
>
> 1. Re: IPexert R&S Net file on Vista,, (Tyson Scott)
> 2. cannot load .net files (Lee Q)
> 3. Re: cannot load .net files (Tyson Scott)
> 4. Re: Volume 1 task 9.5 (Rob)
>
>
>
----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 24 Jun 2009 12:25:34 -0400
> From: "Tyson Scott" <[email protected]>
> Subject: Re: [OSL | CCIE_RS] IPexert R&S Net file on Vista,,
> To: "'MANNY Omari'" <[email protected]>,
> <[email protected]>
> Message-ID: <002d01c9f4e8$6899f500$39cddf...@com>
> Content-Type: text/plain; charset="us-ascii"
>
> Manny,
>
>
>
> It is telling you the problem. It doesn't recognize the lines.
> Please
> attach your .net file and maybe someone on the forum can help.
>
>
>
> Regards,
>
>
>
> Tyson Scott - CCIE #13513 R&S and Security
>
> Technical Instructor - IPexpert, Inc.
>
>
> Telephone: +1.810.326.1444
> Cell: +1.248.504.7309
> Fax: +1.810.454.0130
> Mailto: [email protected]
>
>
>
> Join our free online support and peer group communities:
> <http://www.IPexpert.com/communities>
> http://www.IPexpert.com/communities
>
>
>
> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video
On
> Demand
> and Audio Certification Training Tools for the Cisco CCIE R&S Lab,
> CCIE
> Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE
> Storage
> Lab Certifications.
>
>
>
> From: MANNY Omari [mailto:[email protected]]
> Sent: Wednesday, June 24, 2009 6:54 AM
> To: [email protected]; [email protected]
> Subject: RE: [OSL | CCIE_RS] IPexert R&S Net file on Vista,,
>
>
>
>
>
> Hello Sir,
>
> Please find the attched screenshot of the error message.
>
> Waiting to hear soon
>
> Best Regards
>
>
> _____
>
> From: [email protected]
> To: [email protected]; [email protected]
> Subject: RE: [OSL | CCIE_RS] IPexert R&S Net file on Vista,,
> Date: Mon, 22 Jun 2009 10:26:48 -0400
>
> Manny,
>
>
>
> Can you give more details on the strange error?
>
>
>
> The only thing that I can think of off the top of my head is windows
> vista
> doesn't enable the telnet server/client b default. You need to
enable
> both
> of these and then re-install dynagen or GNS3 whichever you are
using.
>
>
>
>
> If that is not the problem please provide details.
>
>
>
> Regards,
>
>
>
> Tyson Scott - CCIE #13513 R&S and Security
>
> Technical Instructor - IPexpert, Inc.
>
>
> Telephone: +1.810.326.1444
> Cell: +1.248.504.7309
> Fax: +1.810.454.0130
> Mailto: [email protected]
>
>
>
> Join our free online support and peer group communities:
> <http://www.ipexpert.com/communities>
> http://www.IPexpert.com/communities
>
>
>
> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video
On
> Demand
> and Audio Certification Training Tools for the Cisco CCIE R&S Lab,
> CCIE
> Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE
> Storage
> Lab Certifications.
>
>
>
> From: [email protected]
> [mailto:[email protected]] On Behalf Of MANNY
Omari
> Sent: Sunday, June 21, 2009 6:06 AM
> To: [email protected]
> Subject: [OSL | CCIE_RS] IPexert R&S Net file on Vista,,
>
>
>
>
>
> Dear respected members;
>
> I hope you are all doing well. I was running IPexpert R&S net file
> well but
> when i upgrade my OS to Vista i get a strange error,
> Does anyone have anyidea it needs an extra configuration on Windows
> Vista?
>
> Looking to hear soon.
>
> Best Regards
> Manouchehr
>
> _____
>
> Windows LiveT: Keep your life in sync. Check
>
<http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012
> 009>
> it out!
>
>
>
> _____
>
> check out the rest of the Windows LiveT. More than mail-Windows
LiveT
> goes
> way beyond your inbox. More than messages
> <http://www.microsoft.com/windows/windowslive/>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
http://onlinestudylist.com/pipermail/ccie_rs/attachments/20090624/5d61
> 1493/attachment-0001.htm
>
> ------------------------------
>
> Message: 2
> Date: Wed, 24 Jun 2009 17:06:20 -0400
> From: Lee Q <[email protected]>
> Subject: [OSL | CCIE_RS] cannot load .net files
> To: [email protected]
> Message-ID:
> <[email protected]>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hello,
>
> I got gns3 working ok in vista, now I am trying to get it working in
> ubuntu.
> I hope you can help me. Here is my problem:
> I can create projects and save them, but I cannot load a .net file,
> any .net file.
>
> I open gns3, everything looks fine, my hypervisor is all good,
> dynamips tests ok, I'm ready to go to town.
>
> But when I try to open a .net project from within gns3, I just get a
> blank workspace.
> I checked my paths in the .ini file and the .net files. What am I
> missing?
>
> Ubuntu 9.04
> GNS3-0.6.2
>
> Lee
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 24 Jun 2009 22:00:17 -0400
> From: "Tyson Scott" <[email protected]>
> Subject: Re: [OSL | CCIE_RS] cannot load .net files
> To: "'Lee Q'" <[email protected]>, <[email protected]>
> Message-ID: <00a501c9f538$b1537460$13fa5d...@com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Have you tried Adding a router from the interface and see if you can
> actually add an individual device. If you can't do that then you
have
> an
> installation issue.
>
> Regards,
> ?
> Tyson Scott - CCIE #13513 R&S and Security
> Technical Instructor - IPexpert, Inc.
>
> Telephone: +1.810.326.1444
> Cell: +1.248.504.7309
> Fax: +1.810.454.0130
> Mailto:? [email protected]
> ?
> Join our free online support and peer group communities:
> http://www.IPexpert.com/communities
> ?
> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video
On
> Demand
> and Audio Certification Training Tools for the Cisco CCIE R&S Lab,
> CCIE
> Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE
> Storage
> Lab Certifications.
>
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Lee Q
> Sent: Wednesday, June 24, 2009 5:06 PM
> To: [email protected]
> Subject: [OSL | CCIE_RS] cannot load .net files
>
> Hello,
>
> I got gns3 working ok in vista, now I am trying to get it working in
> ubuntu.
> I hope you can help me. Here is my problem:
> I can create projects and save them, but I cannot load a .net file,
> any .net file.
>
> I open gns3, everything looks fine, my hypervisor is all good,
> dynamips tests ok, I'm ready to go to town.
>
> But when I try to open a .net project from within gns3, I just get a
> blank workspace.
> I checked my paths in the .ini file and the .net files. What am I
> missing?
>
> Ubuntu 9.04
> GNS3-0.6.2
>
> Lee
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 24 Jun 2009 21:02:50 -0500
> From: "Rob" <[email protected]>
> Subject: Re: [OSL | CCIE_RS] Volume 1 task 9.5
> To: <[email protected]>
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="us-ascii"
>
> I submitted the question below last night, and got an email back
that
> stated
> the message was received by the mailing list, but I have never seen
it
> go
> out nor received any answers to the question? I was just wondering
if
> it
> got lost some how.
>
> _____
>
> From: Rob [mailto:[email protected]]
> Sent: Tuesday, June 23, 2009 10:45 PM
> To: ''
> Subject: Volume 1 task 9.5
>
> While configuring my routers with this task I noticed that the
> loopbacks
> from R5 would not show up on R6 routing table.. Same for R6's
> loopback to
> R5. It did not take long and I noticed that the configuration had a
> flaw in
> the fact that split horizon was killing those routes on R2 since R2
> was
> acting has the hub of the frame relay network.. When I checked the
> proctors
> guide it shows that it was operating without turning split horizon
> off. Am
> I missing something or was that command omitted from the proctors
> guide?
>
> Rob
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
http://onlinestudylist.com/pipermail/ccie_rs/attachments/20090624/bb9c
> 66d7/attachment.htm
>
> End of CCIE_RS Digest, Vol 41, Issue 89
> ***************************************
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> This e-mail is subject to the Telkom SA electronic communication
legal notice,
> available at :
> http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
