Hey Rob! So the diagrams provided for the specific labs are logical in nature. To get the physical topology, you need to look at the general physical topology diagram. That is not provided in every single lab, because it never changes. To download it if you do not have it, check out http://proctorlabs.com/PDF/RS_9_std_top.pdf
In my studying days, I printed that bad boy out and tacked it up on the wall : ) HTH On Sat, Sep 5, 2009 at 10:09 AM, Rob <[email protected]> wrote: > I actually have all of that however there is no where I can see within the > drawing provided nor in the instruction that would say the BB1 is on Port > 11. I can easily tell which switch it is plugged into just not the port. > > No of the routers on the diagrams have that information either however the > do show up in CDP so I could tell. (actually I already need from all of > the > prior labs in WB1 and the others in WB2 that I have done but at this point > I > am playing dumb as if this is the first time I have ever seen this setup) > > I am wondering is that information was missed when writing the lab or if it > is that way for a reason and I just have not figured it out as of yet. > > Rob > > -----Original Message----- > From: GAURAV MADAN [mailto:[email protected]] > Sent: Saturday, September 05, 2009 8:58 AM > To: Rob > Cc: CCIE OSL > Subject: Re: [OSL | CCIE_RS] Vol 2 lab 7 task 1.5 > > From one of the topology diagrams given ; you can always make out .. > whats the physical topology . > In fact from my opinion .... thats the way to start the exam .. draw > physical topo diagrams and mark the vlans on port .. This will make > life much easier. > > HTH > Gaurav Madan > > > On Sat, Sep 5, 2009 at 6:53 PM, Rob<[email protected]> wrote: > > How are you to know what port the BB routers are in when setting up the > > vlans? The Proctor guide only shows setting up the vlan number and never > > but does not show actually setting the vlans on the switches. I know > what > > switch the BB router is on, however the BB routers are not talking CDP > and > > unless I am just overlooking something I do not see where it tells you > the > > port on the switch. > > > > Rob > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.409 / Virus Database: 270.13.71/2334 - Release Date: 09/04/09 > 17:51:00 > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
