HI Joe
Is the Frame Switch configured by the Service Provider, and tthe hub and spokes
confiugred by a Network Engineer?
Kind Regards
Ahmed
--- Den sön 2009-09-06 skrev Joe Astorino <[email protected]>:
Från: Joe Astorino <[email protected]>
Ämne: Re: [OSL | CCIE_RS] When configuring hub and spokes (Frame relay) in a
production network
Till: "Ahmed Haji Munye" <[email protected]>
Kopia: "CC IE" <[email protected]>
Datum: söndag 6 september 2009 06.07
Not sure I fully understand the questions but:
1) In a lab environment you usually have a frame-relay switch that runs serial
cables to your hub and spoke frame-relay routers. Where you put the DCE for
serial clocking is entirely up to you, but it seems to make sense to me to put
it on the frame switch. You also need to setup your frame switch to actually do
frame-switching. In the "real world" I couldn't see running serial cables
between your hub and spoke...I don't really get that. You would probably have
your hub and spokes running into a service provider frame-relay cloud running
on a T1 connection or something.
2) The labs we design are designed to help you pass the CCIE lab not for best
design practices. Much of the frame-relay stuff you see in the CCIE lab,
ESPECIALLY for OSPF is completely FUBAR and should not be used in production in
most cases : ) Use your best judgement, but I would not be using a CCIE lab
practice workbook for a guide on best practices : )
On Sun, Sep 6, 2009 at 12:54 AM, Ahmed Haji Munye <[email protected]> wrote:
Hi
When configuring hub and spokes (Frame relay) in a production network (real
world), do you also:
- use a router with 8 serial interface having all the DCE ends plugged on it
and the DTE ends on the Hup and spokes?
- my other questions is, do you always use the same configs and commands as
shown in detailed solution the labs ?
Kind Regards
Ahmed
Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling.
Sök och jämför priser hos Kelkoo.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
--
Regards,
Joe Astorino - CCIE #24347 R&S
Technical Instructor - IPexpert, Inc.
Cell: +1.586.212.6107
Fax: +1.810.454.0130
Mailto: [email protected]
__________________________________________________________
Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling.
Sök och jämför priser hos Kelkoo.
http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
