Sergio, If you are using the normal startup configs you can just put them in those directories. You would probably want another sub-directory for each lab. You might want to adjust that path and also verify the interfaces match up, sometimes your Dynamips routers will have slightly different numbering, especially the "switch".
On Thu, Jan 28, 2010 at 9:35 AM, Sergio D. <[email protected]> wrote: > Hey Guys, > First question for this list. I am starting to go through the workgroup > labs and I will be using Dynagen/Dynamips for a lot of these labs. I noticed > that there is a .net file we can download (item 74) and I have a two part > question in regards to this. > Does this .net file work for all the labs? > Are the startup configurations depending on the lab that I am doing? For > example I see the following in the configurations: > > cnfg = C:\Documents and Settings\Administrator\My > Documents\R&S_configs\Cat4-startup.cfg > cnfg = C:\Documents and Settings\Administrator\My > Documents\R&S_configs\R1-startup.cfg > cnfg = C:\Documents and Settings\Administrator\My > Documents\R&S_configs\R2-startup.cfg > cnfg = C:\Documents and Settings\Administrator\My > Documents\R&S_configs\R6-startup.cfg > cnfg = C:\Documents and Settings\Administrator\My > Documents\R&S_configs\R7-startup.cfg > > Under each router/switch instance, but I dont' see any files named that in > the configs folder, so I assume that if I am doing LAB5 I use the initial > configurations found in the LAB5 folder? > > Thanks in advance, > > > -- > Sergio Danelli > JNCIE #170 > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S, SP), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
