thanks for the suggestion Bryan. So is my assumption correct then, initial configuration from config folders = startup cnfg path? and the .net file will work for all the labs, since the autostart is off, I can just fire up the relevant routers depending on the lab that I am doing?
thanks again. On Thu, Jan 28, 2010 at 1:14 PM, Bryan Bartik <[email protected]> wrote: > Sergio, > > If you are using the normal startup configs you can just put them in those > directories. You would probably want another sub-directory for each lab. You > might want to adjust that path and also verify the interfaces match up, > sometimes your Dynamips routers will have slightly different numbering, > especially the "switch". > > On Thu, Jan 28, 2010 at 9:35 AM, Sergio D. <[email protected]> wrote: > >> Hey Guys, >> First question for this list. I am starting to go through the workgroup >> labs and I will be using Dynagen/Dynamips for a lot of these labs. I noticed >> that there is a .net file we can download (item 74) and I have a two part >> question in regards to this. >> Does this .net file work for all the labs? >> Are the startup configurations depending on the lab that I am doing? For >> example I see the following in the configurations: >> >> cnfg = C:\Documents and Settings\Administrator\My >> Documents\R&S_configs\Cat4-startup.cfg >> cnfg = C:\Documents and Settings\Administrator\My >> Documents\R&S_configs\R1-startup.cfg >> cnfg = C:\Documents and Settings\Administrator\My >> Documents\R&S_configs\R2-startup.cfg >> cnfg = C:\Documents and Settings\Administrator\My >> Documents\R&S_configs\R6-startup.cfg >> cnfg = C:\Documents and Settings\Administrator\My >> Documents\R&S_configs\R7-startup.cfg >> >> Under each router/switch instance, but I dont' see any files named that in >> the configs folder, so I assume that if I am doing LAB5 I use the initial >> configurations found in the LAB5 folder? >> >> Thanks in advance, >> >> >> -- >> Sergio Danelli >> JNCIE #170 >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > > -- > Bryan Bartik > CCIE #23707 (R&S, SP), CCNP > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com > -- Sergio Danelli JNCIE #170
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
