I have just made an example on how to automate the process of getting all the config files dynamips ready. I tested it and it works as I thought (tested on my mabook). See attachments.
On Thu, 28 Jan 2010 15:04:45 -0700 Bryan Bartik <[email protected]> wrote: : Sergio,: : Yes, you got it. I always removed the cnfg line from my .net file and pasted
: the file in...but whatever you find easier. Let us know if you run into : issues.: : On Thu, Jan 28, 2010 at 1:44 PM, Sergio D. <[email protected]> wrote: : :> thanks for the suggestion Bryan. :> So is my assumption correct then, initial configuration from config folders
:> = startup cnfg path?:> and the .net file will work for all the labs, since the autostart is off, I :> can just fire up the relevant routers depending on the lab that I am doing?
:> :> thanks again. :> :>:> On Thu, Jan 28, 2010 at 1:14 PM, Bryan Bartik <[email protected]>wrote:
:> :>> Sergio, :>>:>> If you are using the normal startup configs you can just put them in those :>> directories. You would probably want another sub-directory for each lab. You
:>> might want to adjust that path and also verify the interfaces match up, :>> sometimes your Dynamips routers will have slightly different numbering, :>> especially the "switch". :>> :>> On Thu, Jan 28, 2010 at 9:35 AM, Sergio D. <[email protected]> wrote: :>> :>>> Hey Guys, :>>> First question for this list. I am starting to go through the workgroup:>>> labs and I will be using Dynagen/Dynamips for a lot of these labs. I noticed :>>> that there is a .net file we can download (item 74) and I have a two part
:>>> question in regards to this. :>>> Does this .net file work for all the labs?:>>> Are the startup configurations depending on the lab that I am doing? For
:>>> example I see the following in the configurations: :>>> :>>> cnfg = C:\Documents and Settings\Administrator\My :>>> Documents\R&S_configs\Cat4-startup.cfg :>>> cnfg = C:\Documents and Settings\Administrator\My :>>> Documents\R&S_configs\R1-startup.cfg :>>> cnfg = C:\Documents and Settings\Administrator\My :>>> Documents\R&S_configs\R2-startup.cfg :>>> cnfg = C:\Documents and Settings\Administrator\My :>>> Documents\R&S_configs\R6-startup.cfg :>>> cnfg = C:\Documents and Settings\Administrator\My :>>> Documents\R&S_configs\R7-startup.cfg :>>> :>>> Under each router/switch instance, but I dont' see any files named that:>>> in the configs folder, so I assume that if I am doing LAB5 I use the initial
:>>> configurations found in the LAB5 folder? :>>> :>>> Thanks in advance, :>>> :>>> :>>> -- :>>> Sergio Danelli :>>> JNCIE #170 :>>> :>>> _______________________________________________:>>> For more information regarding industry leading CCIE Lab training, please
:>>> visit www.ipexpert.com :>>> :>>> :>> :>> :>> -- :>> Bryan Bartik :>> CCIE #23707 (R&S, SP), CCNP :>> Sr. Support Engineer - IPexpert, Inc. :>> URL: http://www.IPexpert.com :>> :> :> :> :> -- :> Sergio Danelli :> JNCIE #170 :>: : : : --
: Bryan Bartik : CCIE #23707 (R&S, SP), CCNP : Sr. Support Engineer - IPexpert, Inc. : URL: http://www.IPexpert.com
doit
Description: Binary data
ipx2dyn
Description: Binary data
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
