Hi Marko, if it's possible, can u maybe post what could be the prob here,after it resolves? Perhaps it will be useful for brainstorming ;)
Thanks Regards, SO Sent from my BlackBerry Wireless Handheld Powered by Gee! from StarHub -----Original Message----- From: Marko Milivojevic <[email protected]> Date: Sat, 27 Mar 2010 16:15:24 To: Markku Leiniö<[email protected]> Cc: OSL Routing and Switching<[email protected]> Subject: Re: [OSL | CCIE_RS] Volume 1 Lab 10, task5 On Sat, Mar 27, 2010 at 16:13, Markku Leiniö <[email protected]> wrote: > Hi, my typical straightforward fix for those issues is > > int s0/1/0 > shut > int s0/1/0.xx > frame interface-dlci xxx > int s0/1/0 > no shut > > This has to be done in quite many labs in Volume 1. I take it just as > a good training for troubleshooting. That exactly was the solution I used to fix this issue. Now, the question is what exactly happened. Since I didn't want to use much of Angel's time on the pod, I didn't look at R4, but I suspect it had Inverse ARP active. -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert YES! We include 400 hours of REAL rack time with our Blended Learning Solution! Mailto: [email protected] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
