If you are talking shaping on the incoming traffic you cant do that. Shaping is like a "store and forward" concept but you are going to get the traffic from them as bursty as they want to send it.
On Jun 22, 2010, at 4:06 PM, Joshua Yost wrote: > I don't want the traffic soplit up into classes, I just want it to be shaped > if possible at the 30Mbps the carrier is policing me at. > > > > > On Tue, Jun 22, 2010 at 2:39 PM, Chadwick L. Allison > <[email protected]> wrote: > There are a lot of different options when it comes to QoS so you need to find > out what version/versions you can use on your NW. ie DCSP, CBWFQ etc. 4 > bit buckets is a good general rule of thumb to use. You can go up to six but > looking at what you have here I don't see a need for that. > > > From: Joshua Yost > Sent: Tuesday, June 22, 2010 11:09 AM > To: [email protected] > Subject: [OSL | CCIE_RS] QOS > > Lets say you have a customer switch (a 3560) with a Metro Ethernet Link on > one of its ports. The provider polices you to 30 Mbps. I want to shape the > traffic on my side to avoid the choppiness. > > Scenario 1: I don't have any concept of classes of traffic in my network, I > just want to try so shape to 30Mbps overall. How would you configure this? > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
