I have never had to create QoS with one bit bucket. Why bother? The only time QoS kicks in is when there is congestion and if you don't care what traffic makes it through then QoS isn't going to do anything with one bucket. I don't know if you can even make QoS with one bucket...
From: Joshua Yost Sent: Tuesday, June 22, 2010 2:06 PM To: Chadwick L. Allison Cc: [email protected] Subject: Re: [OSL | CCIE_RS] QOS I don't want the traffic soplit up into classes, I just want it to be shaped if possible at the 30Mbps the carrier is policing me at. On Tue, Jun 22, 2010 at 2:39 PM, Chadwick L. Allison <[email protected]> wrote: There are a lot of different options when it comes to QoS so you need to find out what version/versions you can use on your NW. ie DCSP, CBWFQ etc. 4 bit buckets is a good general rule of thumb to use. You can go up to six but looking at what you have here I don't see a need for that. From: Joshua Yost Sent: Tuesday, June 22, 2010 11:09 AM To: [email protected] Subject: [OSL | CCIE_RS] QOS Lets say you have a customer switch (a 3560) with a Metro Ethernet Link on one of its ports. The provider polices you to 30 Mbps. I want to shape the traffic on my side to avoid the choppiness. Scenario 1: I don't have any concept of classes of traffic in my network, I just want to try so shape to 30Mbps overall. How would you configure this? ------------------------------------------------------------------------------ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
