That's cool, I always think that the metric weights is a Boolean value 1 or 0. If someone ask me to configure EIGRP to prefer BW over DL my choice would be 0 1 0 0 0 0. Everyday I a new day to learn something new.
On Mon, Aug 23, 2010 at 11:18 AM, Di Bias, Steve <[email protected]>wrote: > Just to add with what Abel stated you can influence the EIGRP metrics > using a few different approaches. You have the ability to change the > bandwidth, delay, administrative distance, and you can also use an offset > list as well, depending upon your lab scenario. > > > > > http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c2d96.shtml > > > > If you were asked to do so you could also change this using the metric > weights command under EIGRP. For example, if the lab asked you to prefer > bandwidth over delay you could use the following command under EIGRP > > > > *R9(config)#router eigrp 2* > > *R9(config-router)#metric weights 0 2 0 1 0 0* > > > > > http://www.ccda.biz/en/US/docs/ios/12_2/iproute/command/reference/1rfeigrp.html#wp1023638 > > > > Hope this helps! > > Thx > ------------------------------ > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Abel ... > *Sent:* Monday, August 23, 2010 7:40 AM > *To:* Feroz Khan Durrani > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_RS] EIGRP > > > > Changin by default the BW and Delay in the network can help you to > influence the traffic path. > > On Mon, Aug 23, 2010 at 10:38 AM, Abel ... <[email protected]> wrote: > > SRTT (Smooth Round Trip Time) - This is the average in milliseconds that a > packet to a neighbor take for the full round, transmit and the reception of > the acknowledge of the packet. > > > > By default EIGRP uses BW and Delay for Metic composition (K1 and K3 Value), > to change with value EIGRP use just change the default under the router > process with the weight metric command (K0 for TOS, no used, K1 BW, K2 Load, > K3 Delay, k4 Reability and K5 MTU) you can verify this with show ip > protocols. > > > > The metric is compound depending the K value in use, There a formula to > calculate the value of the metric value but I don't have my notes at hand. > > > > Grts > > > > On Mon, Aug 23, 2010 at 10:13 AM, Feroz Khan Durrani <[email protected]> > wrote: > > > Hi, > > > > Can any one explian about eigrp srtt. > > > > how do i change composite metric in EIGRP > > > > Rgds, > > Feroz > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > > > > > UHS Confidentiality Notice: This e-mail message, including any attachments, > is for the sole use of the intended recipient(s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution of this information is prohibited, and may be > punishable by law. If this was sent to you in error, please notify the > sender by reply e-mail and destroy all copies of the original message.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
