*TASK : 9.6 (EIGRP) - LAB-9.*
*Though i have complete and correct neighborship on R5:*
---------------------------------------------------------------------------------------------
R5(config)#do show ip eigrp ne
IP-EIGRP neighbors for process 1001
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
3 150.100.220.7 Fa0/0 10 01:25:54 6 200 0 53
2 150.100.221.7 Fa0/1 11 01:25:54 6 200 0 52
1 150.100.100.2 Se0/1/0 162 01:37:56 85 2280 0 49
0 150.100.25.2 Se0/2/0 13 01:37:57 1 1140 0 48
---------------------------------------------------------------------------------------------
*Still when giving : show ip route 100.100.100.0 , i can see it only through
150.100.25.2, but the workbook states that it should come through both
150.100.25.2 and 150.100.100.2.
*
*R5#SHOW IP ROUTE 100.100.100.0
Routing entry for 100.100.100.0/24
Known via "eigrp 1001", distance 90, metric 20517120, type internal
Redistributing via eigrp 1001
Last update from 150.100.25.2 on Serial0/2/0, 00:49:06 ago
Routing Descriptor Blocks:
* 150.100.25.2, from 150.100.25.2, 00:49:06 ago, via Serial0/2/0
Route metric is 20517120, traffic share count is 1
Total delay is 20200 microseconds, minimum bandwidth is 128 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2*
**
**
*Please advise. *
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
