Out of curiosity what does "show ip eigrp topology 100.100.100.0" display
From: [email protected] [mailto:[email protected]] On Behalf Of Amer Mustafa Sent: September-04-10 6:49 PM To: [email protected] Subject: [Bulk] [OSL | CCIE_RS] TASK : 9.6 (EIGRP) - LAB-9. TASK : 9.6 (EIGRP) - LAB-9. Though i have complete and correct neighborship on R5: ---------------------------------------------------------------------------- ----------------- R5(config)#do show ip eigrp ne IP-EIGRP neighbors for process 1001 H Address Interface Hold Uptime SRTT RTO Q Seq (sec) (ms) Cnt Num 3 150.100.220.7 Fa0/0 10 01:25:54 6 200 0 53 2 150.100.221.7 Fa0/1 11 01:25:54 6 200 0 52 1 150.100.100.2 Se0/1/0 162 01:37:56 85 2280 0 49 0 150.100.25.2 Se0/2/0 13 01:37:57 1 1140 0 48 ---------------------------------------------------------------------------- ----------------- Still when giving : show ip route 100.100.100.0 , i can see it only through 150.100.25.2, but the workbook states that it should come through both 150.100.25.2 and 150.100.100.2. R5#SHOW IP ROUTE 100.100.100.0 Routing entry for 100.100.100.0/24 Known via "eigrp 1001", distance 90, metric 20517120, type internal Redistributing via eigrp 1001 Last update from 150.100.25.2 on Serial0/2/0, 00:49:06 ago Routing Descriptor Blocks: * 150.100.25.2, from 150.100.25.2, 00:49:06 ago, via Serial0/2/0 Route metric is 20517120, traffic share count is 1 Total delay is 20200 microseconds, minimum bandwidth is 128 Kbit Reliability 255/255, minimum MTU 1500 bytes Loading 1/255, Hops 2 Please advise.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
