Configuration looks good, what happens if you harcode them to mode on? If that
doesnt help i agree with jason
Sent from my T-Mobile myTouch 3G Slide
----- Reply message -----
From: "Jason Maynard" <[email protected]>
Date: Sat, Nov 13, 2010 9:12 am
Subject: [OSL | CCIE_RS] Proctorlabs hardware issue?
To: "'Jay Taylor'" <[email protected]>, "'CCIE OSL'"
<[email protected]>
Hey Jay,
I am pretty sure I that I have seen this as well some time ago.
Not sure what it the problem was but I do know my configuration was correct so
I just moved on
Not sure if this helps
From: [email protected]
[mailto:[email protected]] On Behalf Of Jay Taylor
Sent: November-13-10 11:28 AM
To: CCIE OSL
Subject: [OSL | CCIE_RS] Proctorlabs hardware issue?
I'm having an issue where whichever port I add last to an etherchannel between
Cat1 and Cat2 will continually bounce. Configuration looks correct; is this a
hardware issue?
Cat1:
interface FastEthernet0/23
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 12 mode desirable
!
interface FastEthernet0/24
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 12 mode desirable
!
interface Port-channel12
switchport trunk encapsulation dot1q
switchport mode trunk
Cat1(config)#do sh eth sum
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P)
Cat2:
interface FastEthernet0/23
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 12 mode desirable
!
interface FastEthernet0/24
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 12 mode desirable
!
interface Port-channel12
switchport trunk encapsulation dot1q
switchport mode trunk
Cat2(config)#do sh eth sum
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 3
Number of aggregators: 3
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P)
23 Po23(SU) LACP Fa0/19(P) Fa0/20(P)
24 Po24(SU) LACP Fa0/21(P) Fa0/22(P)
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message._______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
